The 10-meter band is a portion of the shortwave radio spectrum internationally allocated to amateur radio and amateur satellite use on a primary basis. The band consists of frequencies stretching from 28000 to 29700 kHz.
- 1 History
- 2 Operating
- 3 Propagation characteristics
- 4 10-metre sub-bands
- 4.1 Worldwide frequency allocations
- 4.2 IARU Region 1
- 4.3 IARU Region 2
- 4.4 IARU Region 3
- 4.5 USA
- 4.6 Canada 10 metre band plan
- 4.7 Key
- 4.8 Novice sub-bands
- 4.9 The Beacon Sub-Bands
- 4.10 Ten Metre Propagation Beacons
- 4.11 The AM Sub-Band
- 4.12 The Satellite Sub-Band
- 4.13 The FM Sub-Band
- 4.14 Other FM Simplex Channels in use
- 5 Organizations
- 6 Aficionados
- 7 References
The 10-meter band was allocated on a worldwide basis by the International Radiotelegraph Conference in Washington, D.C., on October 4, 1927. Its frequency allocation was then 28000-30000 kc.
A 300 kHz segment, from 29.700 MHz to 30.000 MHz, was removed from the amateur radio allocation by the 1947 International Radio Conference of Atlantic City.
In the late 1970s, with the impending ban by the FCC of the sale of older 23-channel CB equipment that did not meet more stringent restrictions on newer, 40-channel units, meant that a surplus of 23-channel CB gear was on the market. This was a windfall for amateur radio enthusiasts, allowing access to fairly inexpensive radios which could easily be modified for use in the 10-metre band.
With the elimination of Morse code testing requirements for U.S. amateurs in February 2007, Technician-class licensees who have not passed a code test may operate with up to 200 watts PEP using CW and SSB modes in a portion of the 10 metre band.
Being a very wide band in HF terms, many different transmission modes can be found on 10 metres. Morse code and other narrowband modes are found toward the bottom portion of the band, SSB from 28.300 MHz up, and wideband modes (AM and FM) are found near the top portion of the band.
Due to its unique spot in the spectrum, 10 metres can be fascinating, if not occasionally challenging, to work. At peak times of the solar cycle when many sunspots appear on the Sun's surface, 10 metres can be alive with extremely long-distance signals, refracting from the F2 layer in the ionosphere. The 10 metre band is primarily a day-time band. As such, generally speaking, the most effective and efficient propagation of radio waves takes place during daylight hours, local time. During periods of increased sunspot activity, "band openings" may begin well before sunrise and continue into the night.
Long distance opportunities via F2 seem to follow the Sun across the globe. In North America, for instance, F2 might bring Europe and Western Asia in the morning, The Americas during midday, and the Pacific and East Asia in late afternoon and early evening.
Even in times of solar minimum, when F2 is rarely available, 10 metres still has some long distance possibilities. Sporadic E propagation can bring in signals from a hundred to many thousands of miles away. Sporadic E on 10 metres is mainly a seasonal event, with late Spring and early Summer being prime time for the mode. A shorter, less-intense period occurs during mid-Winter, often between Christmas and New Year. Other, off-peak openings may be seen almost anytime. Even during solar minimum, F2 openings often occur on transequatorial paths, for example between Europe and Southern Africa or between Pacific North America and the Eastern Pacific islands.
In tropical latitudes 10 metres is open throughout the sunspot cycle, although propagation is often confined to other areas lying along the equator. For example, a good path from West Africa to the Caribbean exists on 10 metres even at solar minimum.
Although 10 metres has a worldwide amateur radio allocation, in some countries the use of portions of 10 metres is allocated by the government by license class, by signal mode and/or signal bandwidth. Beyond these regulations there is also a general voluntary band plan adhered to by amateurs throughout the world.
Worldwide frequency allocations
Worldwide 10 metre frequency allocations are specified by the ITU. The Radio Regulations of the International Telecommunication Union allow amateur radio operations in the frequency range from 28.000 to 29.700 MHz.
IARU Region 1
|IARU Region 1|
IARU Region 2
|IARU Region 2|
IARU Region 3
|IARU Region 3|
|10 Metres||28000 – 28300||28300 – 28500||28500 – 29700|
|Novice / Technician|
|General, Advanced, Extra|
Canada is part of region 2 and as such is subject to the IARU band plan. Radio Amateurs of Canada offers the bandplan below as a recommendation for use by radio amateurs in that country but it does not have the force of law and should only be considered a suggestion or guideline.
|= CW only|
|= CW, narrow band digital ( <= 500 Hz )|
|= CW, narrow band digital ( <= 500 Hz ), wide band digital|
|= CW, RTTY and data (US: < 1 kHz Bandwidth)|
|= CW, beacons|
|= CW, phone, beacons|
|= CW, phone|
|= CW, phone, SSTV, Fax|
|= CW, narrow band digital ( <= 500 Hz ), phone|
|= Guard band - no transmissions allowed|
|= FM, Digital Voice|
|= CW, phone and image|
Named for the segment of 10 metres granted for use to American Novice Class Amateur Radio license holders. The Novice sub-bands consist of two frequency ranges; one for CW and Data operation, and the other for SSB phone operation.
28.000 MHz - 28.300 MHz is a very active part of 10 metres for CW operation.
28.300 MHz - 28.500 MHz is probably the most active part of the 10 metre band. Operation in this segment is almost exclusively SSB world wide.
The Beacon Sub-Bands
Because the propagation on 10 metres can vary drastically throughout the day, propagation beacons are very important to gauge the current conditions of the band. With some differences in each ITU Regions and also from country to country, the beacon sub-bands fall between 28.100 MHz and 28.300 MHz. ITU Region 1 is generally 28.190 MHz - 28.225 MHz and ITU Region 2 is generally 28.200 MHz - 28.300 MHz.
Ten Metre Propagation Beacons
A list of 10-metre propagation beacons is available.
The AM Sub-Band
From 29.000 MHz to 29.200 MHz. Formerly-common practice was to use the band in 10 kHz steps: e.g. 29.010, 29.020, 29.030,... etc. This has not been the case since the 1970s, which saw an influx of surplus 23-channel CB equipment modified for use on the 10-metre amateur band. The surplus equipment would land in 10 kHz steps on the 5 kHz step such as: 29.015, 29.025, 29.035, etc. Users of the surplus equipment also inherited those radios' odd channel spacing, which on the CB band skipped channels that were not used there, because they were set aside for remote control operations.
Proposal: Simplex Channel, Worldwide calling AM: 29.000 MHz
The Satellite Sub-Band
From 29.300 MHz to 29.510 MHz the satellite sub band allows amateur radio operators to communicate with orbiting OSCARs.
Satellite Operation on 10 Metres
Many OSCARs have either an uplink or a downlink in the 29 MHz range. Information about particular satellites and operational modes is available from AMSAT.
As of the current writing, only AO-7´s 10m downlink is active.
The FM Sub-Band
From 29.510 MHz to 29.700, The FM sub-band is usually channelized into repeater and simplex frequencies. The channels are commonly grouped into repeater inputs, simplex, and repeater output frequencies.
Repeater Input Channels: 29.520, 29.540, 29.560, and 29.580 MHz.
Simplex Channel, Worldwide calling FM: 29.600 MHz
Repeater Output Channels: 29.620, 29.640, 29.660, and 29.680 MHz.
Repeater Operation on 10 Metres
Common practice for 10 metre repeaters is to use a 100 kHz negative offset for repeater operation. Due to the very few available repeater channels, "odd-splits" (offsets differing from 100 kHz) and non-standard frequencies are not uncommon. Since 10 metres can frequently open up to propagate globally, most 10 metre repeaters use a CTCSS sub-audible access tone. 16 kHz wide signals with 5 kHz deviation is normal in this band. 8 kHz narrow signals with 2.5 kHz deviation can also be found.
Other FM Simplex Channels in use
29.300 MHz is a common frequency to find JA hams on. British hams commonly use the 29.400 to 29.500 MHz band for FM as well with 29.400, 29.450, and 29.500 MHz being common. USA hams can be found on FM anywhere above 29.000 MHz, commonly on the above frequencies talking to overseas hams. 29.200 to 29.300 MHz is set aside in some area band plans for FM Simplex use.
Due to its unique nature, 10 metres has a large following of hobbyists who centre most of their time on this frequency band. The major group of enthusiasts is Ten-Ten which has been organized since the 1960s.
- "FCC Online Table of Frequency Allocations" (PDF). 47 C.F.R. Federal Communications Commission. June 2, 2011. Retrieved 28 May 2013.
- "International Radiotelegraph Conference of Washington, 1927" (pdf). Retrieved 28 May 2013.
- "1947 International Radio Conference of Atlantic City" (pdf). Archived from the original on 2012-07-10. Retrieved 28 May 2013.
- FCC Report And Order 87-36, Adopted: January 28, 1987; Released: February 10, 1987. Reprinted in "Novice Enhancement is A Reality!", Happenings, QST Magazine, April 1987, pp. 64-67.
- "Amateur HF Bands". Retrieved 28 May 2013.
- "Radio Amateurs of Canada HF/MF band plan" (pdf). Retrieved 28 May 2013.
- "10-metre propagation beacons". Archived from the original on 2012-02-05. Retrieved 28 May 2013.
- "AMSAT-NA". Retrieved 28 May 2013.
- "Operational OSCAR Satellite Status Summary". Archived from the original on 2013-01-15. Retrieved 28 May 2013.
- "10-10 International". Retrieved 28 May 2013.
|International amateur radio frequency allocations|
|Range||Band||ITU Region 1||ITU Region 2||ITU Region 3|
|LF||2200 m||135.7 kHz - 137.8 kHz|
|MF||600 m||472 kHz - 479 kHz|
|160 m||1.810 MHz - 1.850 MHz||1.800 MHz - 2.000 MHz||1.800 MHz - 2.000 MHz|
|HF||80 / 75 m||3.500 MHz - 3.800 MHz||3.500 MHz - 4.000 MHz||3.500 MHz - 3.900 MHz|
|60 m1||5.250 MHz - 5.450 MHz|
|40 m||7.000 MHz - 7.200 MHz||7.000 MHz - 7.300 MHz||7.000 MHz - 7.200 MHz|
|30 m2||10.100 MHz - 10.150 MHz|
|20 m||14.000 MHz - 14.350 MHz|
|17 m2||18.068 MHz - 18.168 MHz|
|15 m||21.000 MHz - 21.450 MHz|
|12 m2||24.890 MHz - 24.990 MHz|
|10 m||28.000 MHz - 29.700 MHz|
|VHF||6 m||50.000 MHz - 52.000 MHz1||50.000 MHz - 54.000 MHz||50.000 MHz - 54.000 MHz|
|4 m1||70.000 MHz - 70.500 MHz|
|2 m||144.000 MHz - 146.000 MHz||144.000 MHz - 148.000 MHz||144.000 MHz - 148.000 MHz|
|1.25 m||222.000 MHz - 225.000 MHz|
|UHF||70 cm||430.000 MHz - 440.000 MHz||420.000 MHz - 450.000 MHz3||420.000 MHz - 450.000 MHz3|
|33 cm||902.000 MHz - 928.000 MHz|
|23 cm||1.240 GHz - 1.300 GHz|
|13 cm||2.300 GHz - 2.450 GHz|
|SHF||9 cm||3.400 GHz - 3.475 GHz3||3.300 GHz - 3.500 GHz||3.300 GHz - 3.500 GHz|
|5 cm||5.650 GHz - 5.850 GHz||5.650 GHz - 5.925 GHz||5.650 GHz - 5.850 GHz|
|3 cm||10.000 GHz - 10.500 GHz|
|1.2 cm||24.000 GHz - 24.250 GHz|
|EHF||6 mm||47.000 GHz - 47.200 GHz|
|4 mm3||75.500 GHz1 - 81.500 GHz||76.000 GHz - 81.500 GHz||76.000 GHz - 81.500 GHz|
|2.5 mm||122.250 GHz - 123.000 GHz|
|2 mm||134.000 GHz - 141.000 GHz|
|1 mm||241.000 GHz - 250.000 GHz|
|THF||Sub-mm||Some administrations have authorized spectrum for amateur use in this region.|
1 This is not mentioned in the ITU's Table of Frequency Allocations, but individual administrations may make allocations under Article 4.4 of the ITU Radio Regulations. See the appropriate Wiki page for further information.
|See also: Radio spectrum · Electromagnetic spectrum|