From Wikipedia, the free encyclopedia
  (Redirected from 3-D glasses)
Jump to: navigation, search
"stereographic" redirects here. For mapping, see stereographic projection.
Pocket stereoscope with original test image. Used by military to examine stereoscopic pairs of aerial photographs.
View of Boston, c. 1860; an early stereoscopic card for viewing a scene from nature
Kaiserpanorama consisted of a multi-station viewing apparatus and sets of stereo slides. Patented by A. Fuhrmann around 1890.[1]
Company of ladies watching stereoscopic photographs, painting by Jacob Spoel, before 1868. A very early depiction of people using a stereoscope.

Stereoscopy (also called stereoscopics or 3D imaging) is a technique for creating or enhancing the illusion of depth in an image by means of stereopsis for binocular vision. The word stereoscopy derives from Greek στερεός (stereos), meaning "firm, solid", and σκοπέω (skopeō), meaning "to look, to see".[2][3] Any stereoscopic image is called stereogram. Originally, stereogram referred to a pair of stereo images which could be viewed using a stereoscope.

Most stereoscopic methods present two offset images separately to the left and right eye of the viewer. These two-dimensional images are then combined in the brain to give the perception of 3D depth. This technique is distinguished from 3D displays that display an image in three full dimensions, allowing the observer to increase information about the 3-dimensional objects being displayed by head and eye movements.


Stereoscopy creates the illusion of three-dimensional depth from given two-dimensional images. Human vision, including the perception of depth, is a complex process which only begins with the acquisition of visual information taken in through the eyes; much processing ensues within the brain, as it strives to make intelligent and meaningful sense of the raw information provided. One of the very important visual functions that occur within the brain as it interprets what the eyes see is that of assessing the relative distances of various objects from the viewer, and the depth dimension of those same perceived objects. The brain makes use of a number of cues to determine relative distances and depth in a perceived scene, including:[4]

  • Stereopsis
  • Accommodation of the eye
  • Overlapping of one object by another
  • Subtended visual angle of an object of known size
  • Linear perspective (convergence of parallel edges)
  • Vertical position (objects higher in the scene generally tend to be perceived as further away)
  • Haze, desaturation, and a shift to bluishness
  • Change in size of textured pattern detail

(All the above cues, with the exception of the first two, are present in traditional two-dimensional images such as paintings, photographs, and television.)

Stereoscopy is the production of the illusion of depth in a photograph, movie, or other two-dimensional image by presenting a slightly different image to each eye, and thereby adding the first of these cues (stereopsis) as well. Both of the 2D offset images are then combined in the brain to give the perception of 3D depth. It is important to note that since all points in the image focus at the same plane regardless of their depth in the original scene, the second cue, focus, is still not duplicated and therefore the illusion of depth is incomplete. There are also primarily two effects of stereoscopy that are unnatural for the human vision: first, the mismatch between convergence and accommodation, caused by the difference between an object's perceived position in front of or behind the display or screen and the real origin of that light and second, possible crosstalk between the eyes, caused by imperfect image separation by some methods.

Although the term "3D" is ubiquitously used, it is also important to note that the presentation of dual 2D images is distinctly different from displaying an image in three full dimensions. The most notable difference is that, in the case of "3D" displays, the observer's head and eye movement will not increase information about the 3-dimensional objects being displayed. Holographic displays or volumetric display are examples of displays that do not have this limitation. Similar to the technology of sound reproduction, in which it is not possible to recreate a full 3-dimensional sound field merely with two stereophonic speakers, it is likewise an overstatement of capability to refer to dual 2D images as being "3D". The accurate term "stereoscopic" is more cumbersome than the common misnomer "3D", which has been entrenched after many decades of unquestioned misuse. Although most stereoscopic displays do not qualify as real 3D display, all real 3D displays are also stereoscopic displays because they meet the lower criteria as well.

Most 3D displays use this stereoscopic method to convey images. It was first invented by Sir Charles Wheatstone in 1838,[5][6] and improved by Sir David Brewster who made the first portable 3D viewing device.[7]

Wheatstone mirror stereoscope

Wheatstone originally used his stereoscope (a rather bulky device)[8] with drawings because photography was not yet available, yet his original paper seems to foresee the development of a realistic imaging method:[9]

For the purposes of illustration I have employed only outline figures, for had either shading or colouring been introduced it might be supposed that the effect was wholly or in part due to these circumstances, whereas by leaving them out of consideration no room is left to doubt that the entire effect of relief is owing to the simultaneous perception of the two monocular projections, one on each retina. But if it be required to obtain the most faithful resemblances of real objects, shadowing and colouring may properly be employed to heighten the effects. Careful attention would enable an artist to draw and paint the two component pictures, so as to present to the mind of the observer, in the resultant perception, perfect identity with the object represented. Flowers, crystals, busts, vases, instruments of various kinds, &c., might thus be represented so as not to be distinguished by sight from the real objects themselves.[5]

Stereoscopy is used in photogrammetry and also for entertainment through the production of stereograms. Stereoscopy is useful in viewing images rendered from large multi-dimensional data sets such as are produced by experimental data. An early patent for 3D imaging in cinema and television was granted to physicist Theodor V. Ionescu in 1936. Modern industrial three-dimensional photography may use 3D scanners to detect and record three-dimensional information.[10] The three-dimensional depth information can be reconstructed from two images using a computer by corresponding the pixels in the left and right images (e.g.,[11]). Solving the Correspondence problem in the field of Computer Vision aims to create meaningful depth information from two images.

Visual requirements[edit]

Anatomically, there are 3 levels of binocular vision required to view stereo images:

  1. Simultaneous perception
  2. Fusion (binocular 'single' vision)
  3. Stereopsis

These functions develop in early childhood. Some people who have strabismus disrupt the development of stereopsis, however orthoptics treatment can be used to improve binocular vision. A person's stereoacuity determines the minimum image disparity they can perceive as depth. It is believed that approximately 12% of people are unable to properly see 3D images, due to a variety of medical conditions.[12][13] According to another experiment up to 30% of people have very weak stereoscopic vision preventing them from depth perception based on stereo disparity. This nullifies or greatly decreases immersion effects of stereo to them.[14]


"The early bird catches the worm" Stereograph published in 1900 by North-Western View Co. of Baraboo, Wisconsin, digitally restored.

Traditional stereoscopic photography consists of creating a 3D illusion starting from a pair of 2D images, a stereogram. The easiest way to enhance depth perception in the brain is to provide the eyes of the viewer with two different images, representing two perspectives of the same object, with a minor deviation equal or nearly equal to the perspectives that both eyes naturally receive in binocular vision.

To avoid eyestrain and distortion, each of the two 2D images should be presented to the viewer so that any object at infinite distance is perceived by the eye as being straight ahead, the viewer's eyes being neither crossed nor diverging. When the picture contains no object at infinite distance, such as a horizon or a cloud, the pictures should be spaced correspondingly closer together.

The principal advantages of side-by-side viewers is the lack of diminution of brightness, allowing the presentation of images at very high resolution and in full spectrum color, simplicity in creation, and little or no additional image processing is required. Under some circumstances, such as when a pair of images are presented for freeviewing, no device or additional optical equipment is needed.

The principal disadvantage of side-by-side viewers is that large image displays are not practical and resolution is limited by the lesser of the display medium or human eye. This is because as the dimensions of an image are increased, either the viewing apparatus or viewer themselves must move proportionately further away from it in order to view it comfortably. Moving closer to an image in order to see more detail would only be possible with viewing equipment that adjusted to the difference.

Printable cross eye viewer.


Freeviewing is viewing a side-by-side image pair without using a viewing device.[15]

Two methods are available to freeview:[16][17]

  • The parallel viewing method uses an image pair with the left-eye image on the left and the right-eye image on the right. The fused three-dimensional image appears larger and more distant than the two actual images, making it possible to convincingly simulate a life-size scene. The viewer attempts to look through the images with the eyes substantially parallel, as if looking at the actual scene. This can be difficult with normal vision because eye focus and binocular convergence are habitually coordinated. One approach to decoupling the two functions is to view the image pair extremely close up with completely relaxed eyes, making no attempt to focus clearly but simply achieving comfortable stereoscopic fusion of the two blurry images by the "look-through" approach, and only then exerting the effort to focus them more clearly, increasing the viewing distance as necessary. Regardless of the approach used or the image medium, for comfortable viewing and stereoscopic accuracy the size and spacing of the images should be such that the corresponding points of very distant objects in the scene are separated by the same distance as the viewer's eyes, but not more; the average interocular distance is about 63 mm. Viewing much more widely separated images is possible, but because the eyes never diverge in normal use it usually requires some previous training and tends to cause eye strain.
  • The cross-eyed viewing method swaps the left and right eye images so that they will be correctly seen cross-eyed, the left eye viewing the image on the right and vice-versa. The fused three-dimensional image appears to be smaller and closer than the actual images, so that large objects and scenes appear miniaturized. This method is usually easier for freeviewing novices. As an aid to fusion, a fingertip can be placed just below the division between the two images, then slowly brought straight toward the viewer's eyes, keeping the eyes directed at the fingertip; at a certain distance, a fused three-dimensional image should seem to be hovering just above the finger. Alternatively, a piece of paper with a small opening cut into it can be used in a similar manner; when correctly positioned between the image pair and the viewer's eyes, it will seem to frame a small three-dimensional image.

Prismatic, self-masking glasses are now being used by some cross-eyed-view advocates. These reduce the degree of convergence required and allow large images to be displayed. However, any viewing aid that uses prisms, mirrors or lenses to assist fusion or focus is simply a type of stereoscope, excluded by the customary definition of freeviewing.

Stereoscopically fusing two separate images without the aid of mirrors or prisms while simultaneously keeping them in sharp focus without the aid of suitable viewing lenses inevitably requires an unnatural combination of eye vergence and accommodation. Simple freeviewing therefore cannot accurately reproduce the physiological depth cues of the real-world viewing experience. Different individuals may experience differing degrees of ease and comfort in achieving fusion and good focus, as well as differing tendencies to eye fatigue or strain.


An autostereogram is a single-image stereogram (SIS), designed to create the visual illusion of a three-dimensional (3D) scene within the human brain from an external two-dimensional image. In order to perceive 3D shapes in these autostereograms, one must overcome the normally automatic coordination between focusing and vergence.

Stereoscope and stereographic cards[edit]

Main article: Stereoscope

The stereoscope is essentially an instrument in which two photographs of the same object, taken from slightly different angles, are simultaneously presented, one to each eye. A simple stereoscope is limited in the size of the image that may be used. A more complex stereoscope uses a pair of horizontal periscope-like devices, allowing the use of larger images that can present more detailed information in a wider field of view.

Transparency viewers[edit]

A View-Master Model E of the 1950s

Some stereoscopes are designed for viewing transparent photographs on film or glass, known as transparencies or diapositives and commonly called slides. Some of the earliest stereoscope views, issued in the 1850s, were on glass. In the early 20th century, 45x107 mm and 6x13 cm glass slides were common formats for amateur stereo photography, especially in Europe. In later years, several film-based formats were in use. The best-known formats for commercially issued stereo views on film are Tru-Vue, introduced in 1931, and View-Master, introduced in 1939 and still in production. For amateur stereo slides, the Stereo Realist format, introduced in 1947, is by far the most common.

Head-mounted displays[edit]

Main article: Head-mounted display
An HMD with a separate video source displayed in front of each eye to achieve a stereoscopic effect

The user typically wears a helmet or glasses with two small LCD or OLED displays with magnifying lenses, one for each eye. The technology can be used to show stereo films, images or games, but it can also be used to create a virtual display. Head-mounted displays may also be coupled with head-tracking devices, allowing the user to "look around" the virtual world by moving their head, eliminating the need for a separate controller. Performing this update quickly enough to avoid inducing nausea in the user requires a great amount of computer image processing. If six axis position sensing (direction and position) is used then wearer may move about within the limitations of the equipment used. Owing to rapid advancements in computer graphics and the continuing miniaturization of video and other equipment these devices are beginning to become available at more reasonable cost.

Head-mounted or wearable glasses may be used to view a see-through image imposed upon the real world view, creating what is called augmented reality. This is done by reflecting the video images through partially reflective mirrors. The real world view is seen through the mirrors' reflective surface. Experimental systems have been used for gaming, where virtual opponents may peek from real windows as a player moves about. This type of system is expected to have wide application in the maintenance of complex systems, as it can give a technician what is effectively "x-ray vision" by combining computer graphics rendering of hidden elements with the technician's natural vision. Additionally, technical data and schematic diagrams may be delivered to this same equipment, eliminating the need to obtain and carry bulky paper documents.

Augmented stereoscopic vision is also expected to have applications in surgery, as it allows the combination of radiographic data (CAT scans and MRI imaging) with the surgeon's vision.

Virtual retinal displays[edit]

A virtual retinal display (VRD), also known as a retinal scan display (RSD) or retinal projector (RP), not to be confused with a "Retina Display", is a display technology that draws a raster image (like a television picture) directly onto the retina of the eye. The user sees what appears to be a conventional display floating in space in front of them. For true stereoscopy, each eye must be provided with its own discrete display. To produce a virtual display that occupies a usefully large visual angle but does not involve the use of relatively large lenses or mirrors, the light source must be very close to the eye. A contact lens incorporating one or more semiconductor light sources is the form most commonly proposed. As of 2013, the inclusion of suitable light-beam-scanning means in a contact lens is still very problematic, as is the alternative of embedding a reasonably transparent array of hundreds of thousands (or millions, for HD resolution) of accurately aligned sources of collimated light.

A pair of LC shutter glasses used to view XpanD 3D films. The thick frames conceal the electronics and batteries.
RealD circular polarized glasses

3D viewers[edit]

There are two categories of 3D viewer technology, active and passive. Active viewers have electronics which interact with a display. Passive viewers filter constant streams of binocular input to the appropriate eye.


Shutter systems[edit]

A shutter system works by openly presenting the image intended for the left eye while blocking the right eye's view, then presenting the right-eye image while blocking the left eye, and repeating this so rapidly that the interruptions do not interfere with the perceived fusion of the two images into a single 3D image. It generally uses liquid crystal shutter glasses. Each eye's glass contains a liquid crystal layer which has the property of becoming dark when voltage is applied, being otherwise transparent. The glasses are controlled by a timing signal that allows the glasses to alternately darken over one eye, and then the other, in synchronization with the refresh rate of the screen.


Polarization systems[edit]

Main articles: Polarized 3D system and Vectograph

To present stereoscopic pictures, two images are projected superimposed onto the same screen through polarizing filters or presented on a display with polarized filters. For projection, a silver screen is used so that polarization is preserved. On most passive displays every other row of pixels are polarized for one eye or the other. [18]This method is also known as being interlaced. The viewer wears low-cost eyeglasses which also contain a pair of opposite polarizing filters. As each filter only passes light which is similarly polarized and blocks the opposite polarized light, each eye only sees one of the images, and the effect is achieved.

Interference filter systems[edit]

This technique uses specific wavelengths of red, green, and blue for the right eye, and different wavelengths of red, green, and blue for the left eye. Eyeglasses which filter out the very specific wavelengths allow the wearer to see a full color 3D image. It is also known as spectral comb filtering or wavelength multiplex visualization or super-anaglyph. Dolby 3D uses this principle. The Omega 3D/Panavision 3D system has also used an improved version of this technology[19] In June 2012 the Omega 3D/Panavision 3D system was discontinued by DPVO Theatrical, who marketed it on behalf of Panavision, citing ″challenging global economic and 3D market conditions″.[20] Although DPVO dissolved its business operations, Omega Optical continues promoting and selling 3D systems to non-theatrical markets. Omega Optical’s 3D system contains projection filters and 3D glasses. In addition to the passive stereoscopic 3D system, Omega Optical has produced enhanced anaglyph 3D glasses. The Omega’s red/cyan anaglyph glasses use complex metal oxide thin film coatings and high quality annealed glass optics.

Anaglyph 3D glasses

Color anaglyph systems[edit]

Main article: Anaglyph 3D

Anaglyph 3D is the name given to the stereoscopic 3D effect achieved by means of encoding each eye's image using filters of different (usually chromatically opposite) colors, typically red and cyan. Anaglyph 3D images contain two differently filtered colored images, one for each eye. When viewed through the "color-coded" "anaglyph glasses", each of the two images reaches one eye, revealing an integrated stereoscopic image. The visual cortex of the brain fuses this into perception of a three dimensional scene or composition.

Chromadepth system[edit]

Main article: ChromaDepth
ChromaDepth glasses with prism-like film

The ChromaDepth procedure of American Paper Optics is based on the fact that with a prism, colors are separated by varying degrees. The ChromaDepth eyeglasses contain special view foils, which consist of microscopically small prisms. This causes the image to be translated a certain amount that depends on its color. If one uses a prism foil now with one eye but not on the other eye, then the two seen pictures – depending upon color – are more or less widely separated. The brain produces the spatial impression from this difference. The advantage of this technology consists above all of the fact that one can regard ChromaDepth pictures also without eyeglasses (thus two-dimensional) problem-free (unlike with two-color anaglyph). However the colors are only limitedly selectable, since they contain the depth information of the picture. If one changes the color of an object, then its observed distance will also be changed.[citation needed]

KMQ stereo prismatic viewer with openKMQ plastics extensions

Pulfrich method[edit]

Main article: Pulfrich effect

The Pulfrich effect is based on the phenomenon of the human eye processing images more slowly when there is less light, as when looking through a dark lens. Because the Pulfrich effect depends on motion in a particular direction to instigate the illusion of depth, it is not useful as a general stereoscopic technique. For example, it cannot be used to show a stationary object apparently extending into or out of the screen; similarly, objects moving vertically will not be seen as moving in depth. Incidental movement of objects will create spurious artifacts, and these incidental effects will be seen as artificial depth not related to actual depth in the scene.

Over/under format[edit]

Stereoscopic viewing is achieved by placing an image pair one above one another. Special viewers are made for over/under format that tilt the right eyesight slightly up and the left eyesight slightly down. The most common one with mirrors is the View Magic. Another with prismatic glasses is the KMQ viewer.[21] A recent usage of this technique is the openKMQ project.[22]

Other display methods without viewers[edit]


Main article: Autostereoscopy
The Nintendo 3DS uses parallax barrier autostereoscopy to display a 3D image.

Autostereoscopic display technologies use optical components in the display, rather than worn by the user, to enable each eye to see a different image. Because headgear is not required, it is also called "glasses-free 3D". The optics split the images directionally into the viewer's eyes, so the display viewing geometry requires limited head positions that will achieve the stereoscopic effect. Automultiscopic displays provide multiple views of the same scene, rather than just two. Each view is visible from a different range of positions in front of the display. This allows the viewer to move left-right in front of the display and see the correct view from any position. The technology includes two broad classes of displays: those that use head-tracking to ensure that each of the viewer's two eyes sees a different image on the screen, and those that display multiple views so that the display does not need to know where the viewers' eyes are directed. Examples of autostereoscopic displays technology include lenticular lens, parallax barrier, volumetric display, holography and light field displays.


Laser holography, in its original "pure" form of the photographic transmission hologram, is the only technology yet created which can reproduce an object or scene with such complete realism that the reproduction is visually indistinguishable from the original, given the original lighting conditions.[citation needed] It creates a light field identical to that which emanated from the original scene, with parallax about all axes and a very wide viewing angle. The eye differentially focuses objects at different distances and subject detail is preserved down to the microscopic level. The effect is exactly like looking through a window. Unfortunately, this "pure" form requires the subject to be laser-lit and completely motionless—to within a minor fraction of the wavelength of light—during the photographic exposure, and laser light must be used to properly view the results. Most people have never seen a laser-lit transmission hologram. The types of holograms commonly encountered have seriously compromised image quality so that ordinary white light can be used for viewing, and non-holographic intermediate imaging processes are almost always resorted to, as an alternative to using powerful and hazardous pulsed lasers, when living subjects are photographed.

Although the original photographic processes have proven impractical for general use, the combination of computer-generated holograms (CGH) and optoelectronic holographic displays, both under development for many years, has the potential to transform the half-century-old pipe dream of holographic 3D television into a reality; so far, however, the large amount of calculation required to generate just one detailed hologram, and the huge bandwidth required to transmit a stream of them, have confined this technology to the research laboratory.

Volumetric displays[edit]

Main articles: Volumetric display and Bubblegram

Volumetric displays use some physical mechanism to display points of light within a volume. Such displays use voxels instead of pixels. Volumetric displays include multiplanar displays, which have multiple display planes stacked up, and rotating panel displays, where a rotating panel sweeps out a volume.

Other technologies have been developed to project light dots in the air above a device. An infrared laser is focused on the destination in space, generating a small bubble of plasma which emits visible light.

Integral imaging[edit]

Main article: Integral imaging

Integral imaging is an autostereoscopic or multiscopic 3D display, meaning that it displays a 3D image without the use of special glasses on the part of the viewer. It achieves this by placing an array of microlenses (similar to a lenticular lens) in front of the image, where each lens looks different depending on viewing angle. Thus rather than displaying a 2D image that looks the same from every direction, it reproduces a 4D light field, creating stereo images that exhibit parallax when the viewer moves.

Wiggle stereography[edit]

Wiggle stereoscopy is an image display technique achieved by quickly alternating display of left and right sides of a stereogram. Found in animated GIF format on the web. Online examples are visible in the New-York Public Library stereogram collection. The technique is also known as "Piku-Piku".[23]

Stereo photography techniques[edit]

Modern stereo TV camera

For general purpose stereo photography, where the goal is to duplicate natural human vision and give a visual impression as close as possible to actually being there, the correct baseline (distance between where the right and left images are taken) would be the same as the distance between the eyes.[24] When images taken with such a baseline are viewed using a viewing method that duplicates the conditions under which the picture is taken then the result would be an image pretty much the same as what would be seen at the site the photo was taken. This could be described as "ortho stereo."

There are, however, situations where it might be desirable to use a longer or shorter baseline. The factors to consider include the viewing method to be used and the goal in taking the picture. Note that the concept of baseline also applies to other branches of stereography, such as stereo drawings and computer generated stereo images, but it involves the point of view chosen rather than actual physical separation of cameras or lenses.

Stereo window[edit]

For any branch of stereoscopy the concept of the stereo window is important. If a scene is viewed through a window the entire scene would normally be behind the window, if the scene is distant, it would be some distance behind the window, if it is nearby, it would appear to be just beyond the window. An object smaller than the window itself could even go through the window and appear partially or completely in front of it. The same applies to a part of a larger object that is smaller than the window.

The goal of setting the stereo window is to duplicate this effect.

To truly understand the concept of window adjustment it is necessary to understand where the stereo window itself is. In the case of projected stereo, including "3D" movies, the window would be the surface of the screen. With printed material the window is at the surface of the paper. When stereo images are seen by looking into a viewer the window is at the position of the frame. In the case of Virtual Reality the window seems to disappear as the scene becomes truly immersive.

The entire scene can be moved backwards or forwards in depth, relative to the stereo window, by horizontally sliding the left and right eye views relative to each other. Moving either or both images away from the center will bring the whole scene away from the viewer, whereas moving either or both images toward the center will move the whole scene toward the viewer. Any objects in the scene that have no horizontal offset, will appear at the same depth as the stereo window.

There are several considerations in deciding where to place the scene relative to the window.

First, in the case of an actual physical window, the left eye will see less of the left side of the scene and the right eye will see less of the right side of the scene, because the view is partly blocked by the window frame. This principle is known as "less to the left on the left" or 3L, and is often used as a guide when adjusting the stereo window where all objects are to appear behind the window. When the images are moved further apart, the outer edges are cropped by the same amount, thus duplicating the effect of a window frame.

Another consideration involves deciding where individual objects are placed relative to the window. It would be normal for the frame of an actual window to partly overlap or "cut off" an object that is behind the window. Thus an object behind the stereo window might be partly cut off by the frame or side of the stereo window. So the stereo window is often adjusted to place objects cut off by window behind the window. If an object, or part of an object, is not cut off by the window then it could be placed in front of it and the stereo window may be adjusted with this in mind. This effect is how swords, bugs, flashlights, etc. often seem to "come off the screen" in 3D movies.

If an object which is cut off by the window is placed in front of it, an effect results that is somewhat unnatural and is usually considered undesirable, this is often called a "window violation". This can best be understood by returning to the analogy of an actual physical window. An object in front of the window would not be cut off by the window frame but would, rather, continue to the right and/or left of it. This can't be duplicated in stereography techniques other than Virtual Reality so the stereo window will normally be adjusted to avoid window violations. There are, however, circumstances where they could be considered permissible.

A third consideration is viewing comfort. If the window is adjusted too far back the right and left images of distant parts of the scene may be more than 2.5" apart, requiring that the viewers eyes diverge in order to fuse them. This results in image doubling and/or viewer discomfort. In such cases a compromise is necessary between viewing comfort and the avoidance of window violations.

In stereo photography window adjustments is accomplished by shifting/cropping the images, in other forms of stereoscopy such as drawings and computer generated images the window is built into the design of the images as they are generated. It is by design that in CGI movies certain images are behind the screen whereas others are in front of it.


While stereoscopy have typically been used for amusement, including stereographic cards, 3D films, printings using anaglyph and pictures, posters and books of autostereograms, there are also other uses of this technology.


Salvador Dalí created some impressive stereograms in his exploration in a variety of optical illusions.[25]


In the 19th Century, it was realized that stereoscopic images provided an opportunity for people to experience places and things far away, and many tour sets were produced, and books were published allowing people to learn about geography, science, history, and other subjects.[26] Such uses continued till the mid 20th Century, with the Keystone View Company producing cards into the 1960s.

This image, captured on June 8, 2004, is an example of a composite anaglyph image generated from the stereo Pancam on Spirit, one of the Mars Exploration Rovers. It can be viewed stereoscopically with proper red/cyan filter glasses. A single 2D version is also available. Courtesy NASA/JPL-Caltech.3d glasses red cyan.svg 3D red cyan glasses are recommended to view this image correctly.

Space exploration[edit]

The Mars Exploration Rovers, launched by NASA in 2003 to explore the surface of Mars, are equipped with unique cameras that allow researchers to view stereoscopic images of the surface of Mars.

The two cameras that make up each rover's Pancam are situated 1.5m above the ground surface, and are separated by 30 cm, with 1 degree of toe-in. This allows the image pairs to be made into scientifically useful stereoscopic images, which can be viewed as stereograms, anaglyphs, or processed into 3D computer images.[27]

The ability to create realistic 3D images from a pair of cameras at roughly human-height gives researchers increased insight as to the nature of the landscapes being viewed. In environments without hazy atmospheres or familiar landmarks, humans rely on stereoscopic clues to judge distance. Single camera viewpoints are therefore more difficult to interpret. Multiple camera stereoscopic systems like the Pancam address this problem with unmanned space exploration.

Clinical uses[edit]

Stereograms cards are frequently used by orthoptists and vision therapists in the treatment of many binocular vision and accommodative disorders.[28]

Mathematical, scientific and engineering uses[edit]

Stereopair photographs provided a way for 3-dimensional (3D) visualisations of aerial photographs; since about 2000, 3D aerial views are mainly based on digital stereo imaging technologies. Cartographers generate today stereopairs using computer programs in order to visualise topography in three dimensions.[29] Computerised stereo visualisation applies stereo matching programs. [30] In biology and chemistry, complex molecular structures are often rendered in stereopairs. The same technique can also be applied to any mathematical (or scientific, or engineering) parameter that is a function of two variables, although in these cases it is more common for a three-dimensional effect to be created using a 'distorted' mesh or shading (as if from a distant light source).




  1. ^ "The Kaiser (Emperor) Panorama". June 9, 2012. 
  2. ^ στερεός, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus Digital Library
  3. ^ σκοπέω, Henry George Liddell, Robert Scott, A Greek-English Lexicon, on Perseus Digital Library
  4. ^ Flight Simulation, J. M. Rolfe and K. J. Staples, Cambridge University Press, 1986, page 134
  5. ^ a b Contributions to the Physiology of Vision.—Part the First. On some remarkable, and hitherto unobserved, Phenomena of Binocular Vision. By CHARLES WHEATSTONE, F.R.S., Professor of Experimental Philosophy in King's College, London.
  6. ^ Welling, William. Photography in America, page 23
  7. ^ International Stereoscopic Union, 2006, "Stereoscopy", Numbers 65-72, p.18
  8. ^ Stereo Realist Manual, p. 375.
  9. ^ Stereo Realist Manual, pp. 377–379.
  10. ^ Fay Huang, Reinhard Klette, and Karsten Scheibe: Panoramic Imaging (Sensor-Line Cameras and Laser Range-Finders). Wiley & Sons, Chichester, 2008
  11. ^ Dornaika, F.; Hammoudi, K (2009). "Extracting 3D Polyhedral Building Models from Aerial Images using a Featureless and Direct Approach" (PDF). Machine Vision Applications. Proc. IAPR/MVA. Retrieved 2010-09-26. 
  12. ^ "Eyecare Trust". Eyecare Trust. Retrieved 29 March 2012. 
  13. ^ "Daily Telegraph Newspaper". The Daily Telegraph. Retrieved 29 March 2012. 
  14. ^ Posted on (19 December 2011). "Understanding Requirements for High-Quality 3D Video: A Test in Stereo Perception". Retrieved 29 March 2012. 
  15. ^ The Logical Approach to Seeing 3D Pictures. by Optometrists Network. Retrieved 2009-08-21
  16. ^ How To Freeview Stereo (3D) Images. Greg Erker. Retrieved 2009-08-21
  17. ^ How to View Photos on This Site. Stereo Photography – The World in 3D. Retrieved 2009-08-21
  18. ^ Tseng, Belle; Anastassiou, Dimitris. "Compatible Video Coding of Stereoscopic Sequences using MPEG-2's Scalability and Interlaced Structure". Columbia University. Retrieved 8 July 2014. 
  19. ^ "Seeing is believing""; Cinema Technology, Vol 24, No.1 March 2011
  20. ^
  21. ^ "Glossary". June 8, 2012. 
  22. ^ "openKMQ". June 8, 2012. 
  23. ^
  24. ^ DrT (2008-02-25). "Dr. T". Retrieved 2012-03-04. 
  25. ^ Horibuchi, S. (1994). Salvador Dalí: the stereo pair artist. In Horibuchi, S. (Ed.), Stereogram (pp.9, pp.42). San Francisco: Cadence Books. ISBN 0-929279-85-9
  26. ^ University of Virginia The Stereoscope In America, accessed 21 March 2009.
  27. ^ "Pancam technical brief" (PDF). Cornell University. Retrieved 2006-06-30. 
  28. ^ Bartiss, OD MD, Michael (2005-01-25). "Convergence Insufficiency". WebMD. Retrieved 2006-06-30. 
  29. ^ David F. Watson (1992). Contouring. A Guide to the Analysis and Display of Spatial Data (with programs on diskette). In: Daniel F. Merriam (Ed.); Computer Methods in the Geosciences; Pergamon / Elsevier Science, Amsterdam; 321 pp. ISBN 0-08-040286-0
  30. ^ Reinhard Klette (2014). "Concise Computer Vision" (see Chapter 8 for stereo matching). Springer, London; 429 pp. ISBN 978-1-4471-6319-0


  • Simmons, Gordon (March–April 1996). "Clarence G. Henning: The Man Behind the Macro". Stereo World 23 (1): 37–43. 
  • Willke, Mark A.; Zakowski, Ron (March–April 1996). "A Close Look into the Realist Macro Stereo System". Stereo World 23 (1): 14–35. 
  • Morgan, Willard D.; Lester, Henry M. (October 1954). Stereo Realist Manual. and 14 contributors. New York: Morgan & Lester. OCLC 789470. 

Further reading[edit]

  • Scott B. Steinman, Barbara A. Steinman and Ralph Philip Garzia. (2000). Foundations of Binocular Vision: A Clinical perspective. McGraw-Hill Medical. ISBN 0-8385-2670-5

External links[edit]

Archival Collections[edit]

Guide to the Edward R. Frank Stereograph Collection. Special Collections and Archives, The UC Irvine Libraries, Irvine, California.