AMD Catalyst Control Center
|Original author(s)||ATI Technologies|
|Developer(s)||Advanced Micro Devices|
|Initial release||June 13, 2002(v. 2.1)|
|Operating system||Microsoft Windows
|Platform||IA-32 and x64
|Type||Device driver and system monitor|
|License||Proprietary / Freeware|
AMD Catalyst (formerly named ATI Catalyst) is a device driver and utility software package for Advanced Micro Devices's graphics cards and APUs. It runs on Microsoft Windows and Linux, on 32- and 64-bit x86 processors.
- 1 Supported hardware
- 2 Supported interfaces
- 3 Issues
- 4 History
- 5 See also
- 6 References
- 7 External links
AMD Catalyst is targeted to support all function blocks present on a GPU's or APU's die. Besides IC targeted at rendering, this includes display controllers as well as their SIP blocks to do video decoding, Unified Video Decoder (UVD) and video encoding Video Codec Engine (VCE).
The device driver also supports AMD TrueAudio, a SIP block to do sound related calculations.
- AMD FireStream product line for GPGPU in supercomputers and such
- AMD FireMV product line for multi-monitor setups (deprecated by AMD Eyefinity being available on all consumer products)
- AMD FirePro product line for professionals who require certified OpenGL support
Starting in Catalyst 14.6 AMD has enabled mixed resolution support, allowing for a single Eyefinity display group to be created while each monitor runs at a different resolution. This feature is made possible through the addition of two new Eyefinity display modes, Fit and Expand, which join the traditional Fill mode. In both Fit an Expand mode AMD is compensating for the mismatched resolutions by creating a virtual desktop that is of a different resolution than the monitors, and then either padding it out or cropping it as is necessary.
Before Eyefinity, there was the Windows-only software "HydraVision", a desktop/screen management software mostly providing multi-monitor and virtual-screen management. It has extensive hot-key support.
Some AMD products contain SIP cores for audio acceleration branded AMD TrueAudio. Support for this audio acceleration DSP co-processor is part of AMD Catalyst.
Close to Metal
Close to Metal was a low-level API by AMD which was abandoned in favor of OpenCL.
Heterogeneous System Architecture
Operating systems support
For a long time fglrx (an abbreviation for "FireGL and Radeon for X") had been the name of the proprietary graphics device driver for Linux. Starting from Catalyst 7.11, the ATI Proprietary Linux driver was renamed ATI Catalyst Linux, and was moved to the same release dates and version numbering as the versions for Microsoft Windows.
In the first years of its development, the proprietary Linux driver fglrx had been criticized for its stability and performance issues as well as lack of options. AMD improved the driver in the following periods by including key features such as CrossFire, OverDrive, Catalyst AI, Stream Computing, new anti-aliasing functions, MultiView, SurroundView, etc. But the major breakthrough for fglrx was the strategic decision that AMD took in 2008, to increase the significance of Linux support: From then on all new GPUs in future are to be shipped with Linux driver support right from the first day of their release, instead of having to face a delay of several months as it used to be until then. In the following years the state of the driver had continuously further improved over time, with AMD working in concert with application developers, and most instances of the drivers were considered to be solid enough for most tasks and functional for most users.
On the GDC 2014 AMD was publicly exploring the strategy of rebasing the user space components of the AMD Catalyst Linux driver from the current proprietary Linux kernel blob to the libDRM of the free and open-source radeon driver easing the use and implementation of HSA under Linux. At then X.Org Developer's Conference in October, 2014 AMD's Alex Deucher officialy introduced amdgpu and amdkfd.
|Windows support||From version||To version||Notes|
|Windows 9x||4.4||There were some later releases for these operating systems, including and up to a Windows Me build of Catalyst 6.2 released on Feb 9, 2006.|
|Windows XP||10.2||Driver updates and support stopped at ATI Catalyst 10.2 for video cards with support up to DirectX 9.0c.|
|Windows XP x64||10.2 |
|Windows Vista||7.2||13.9||Driver updates and support stopped at ATI Catalyst 13.9 for video cards with support up to DirectX 10.|
|Windows 8||12.8||Renamed AMD Catalyst with the merger of ATI and AMD.|
Starting with version 4.9 (released on 4 September 2004) the Catalyst driver package included the ATI Catalyst Control Center, a new software application for manipulating many hardware functions, such as 3D settings, monitor controls and video options. It shows a small 3D preview and allows the user to see how changes to the graphics settings affect the quality of the rendered image. It also shows information about the card itself and the software data. This application requires Microsoft .NET Framework.
On Windows Platforms
- Quantity of rendered ahead frames cannot be adjusted
- Triple buffering in D3D cannot be forced
- V-sync in many games under Windows 7 cannot be forced disabled
- Sometimes installables complain about registers being in use by Catalyst Control Center and AMD Fuel Service, and asks to shut them before proceeding. Users are in doubt whether "End Task" on them will cause display to stop working. In Control Panel installed system programs do not have a field to indicate (for any program) whether system will be unusable without it.
On Linux Platforms
- The Device Dependent X driver (DDX) for the X.Org Server supplied by Catalyst,
fglrx_drv.so, does not work with the most recent version of the X.Org Server until several months after it is released. Plans to drop the proprietary DDX entirely and switch to Glamor have not been published as of July 2014.
- No support for 3D HDTVs.
Catalyst originated on 13 June 2002 with version 02.1 - after ATI Technologies released the Radeon 8500 GPU in October 2001 - as "a software suite that includes unified driver and software applications to enable [ATI's] Radeon family of graphics products" for Windows XP, Windows 2000 and Windows Me, with support for Windows 98 via the Windows Me driver. The first number in a release version denotes the year, the second the release within that year, starting at x.1 for all years other than 2003 (which had a 3.0 release).
In June 2012 AMD announced that they would stop monthly driver-updates and release new drivers "when it makes sense".
The original Catalyst consisted of these elements:
- a new, unified driver for ATI Radeon graphics-cards
- Hydravision, ATI's proprietary desktop-management software
- an ATI "Multimedia Center"
- ATI's Remote Wonder software
- a new AGP diagnostic and stability tool
- a redesigned control-panel
Key features promised by ATI include frequent driver-updates with performance enhancements, bug fixes, and new features.
In mid-2004, however, ATI started to support Linux (XFree86, X.Org), hiring a new Linux driver team to produce fglrx. Their new proprietary Linux drivers, instead of being a port of the Windows Catalyst drivers, were based on the Linux drivers for the FireGL (the FireGL drivers worked with Radeons before, but didn't officially support them), a card geared toward graphics producers, not gamers (although the display driver part is now based on the same sources as the ones from Windows Catalyst since version 4.x in late 2004). The proprietary Linux drivers could support R200 (Radeon 8500-9200, 9250) chips. For a better display driver, the drivers from a distribution's official repositories are recommended.
Initially, ATI did not produce Radeon drivers for Linux, instead giving hardware specifications and documentation to Direct Rendering Infrastructure (DRI) developers under various non-disclosure agreements.
The frequency of driver updates increased in late 2004, releasing Linux drivers every two months, half as often as their Windows counterparts. Then since late 2005 this has been increased to monthly releases, inline with the Windows Catalyst releases.
In 2008, ATI changed its release cycles and driver versions; now referred to as Catalyst <year>.<month>, the driver package still includes an internal 8.xx.x driver revision, but it is now monthly, having a common code base with the Windows driver (starting with internal release 8.43). In 2009, the Catalyst driver officially dropped support for R500 and older chips, the FOSS driver being deemed stable and complete enough. The last driver release supporting older architectures is Catalyst 9.3.
- Related technologies
- Related topics
- "AMD Catalyst™ Omega Windows® Release Notes". 2014-12-09. Retrieved 2014-12-09.
- "AMD Catalyst™ OMEGA Linux Release Notes". 2014-12-09. Retrieved 2014-12-09.
- "AMD Catalyst™ 14.11.2 Beta Driver for Windows®". 2014-11-18. Retrieved 2014-11-18.
- "AMD Catalyst™ 14.6 Beta for Linux". 2014-07-14. Retrieved 2014-07-19.
- "AMD Catalyst 14.6 beta adds new Eyefinity functionality". AnandTech. 2014-05-27. Retrieved 2014-07-02.
- "HydraVision". 2008-04-18.
- "PowerPlay™ support in Catalyst for Linux version 8.19.10". 2005-11-12.
- "Alex Deucher - AMD's New Unified Open Source Driver". 2014-10-08.
- ATI Catalyst Linux 7.11 release notes
- AMD Linux 2008 Year in Review on Phoronix.
- WineD3D developer statement concerning fglrx (2008-12)
- "AMD Is Still Looking At The Feasibility Of Mantle On Linux". 2014-03-23. Retrieved 2014-03-23.
- "Catalyst™ 6.2 Drivers and ATI Multimedia Software for Windows 98/Windows 98 SE/Windows ME". Официальный сайт. Retrieved 19 November 2009.
- ATI Catalyst 6.6 release notes
- AMD Catalyst 12.8 release notes
- ATI Catalyst Control Center announcement
- ATI Catalyst announcement
- AMD Drops Monthly Driver Update Practice After Ten Years. "AMD Drops Monthly Driver Update Practice After Ten Years". X-bit labs. Retrieved 2012-12-30.
- "r2** support is completely broken with 8.25.18 - Rage3D Discussion Area". Rage3d.com. Retrieved 2012-12-30.