|This article needs additional citations for verification. (August 2010)|
Al Fahd AF-40-8-1 with optional amphibious kit
|Type||Armoured fighting vehicle|
|Place of origin||Users|
|Used by||Saudi Arabian National Guard|
|Wars||2013 Lahad Datu standoff|
|Manufacturer||Abdallah Al Faris Company for Heavy Industries|
|Variants||AF-40-8-1 Armoured Personnel Carrier (APC)
AF-40-8-2 Armoured Fighting/Reconnaissance Vehicle (AFRV)
|Weight||16.3 t (18.0 short tons) (operating empty weight)|
|Length||7.9 m (26 ft)|
|Width||2.94 m (9.6 ft)|
|Height||Varies by suspension setting
Cruising: 2.065 m (6.77 ft)
Lurking: 1.81 m (5.9 ft)
Obstacle: 2.26 m (7.4 ft)
|Passengers||11 (AF-40-8-1 without turret)|
|Armour||Steel alloy with Kevlar spall liners|
|Varies by customer requirements
AF-40-8-1: Up to a 40 mm cannon
AF-40-8-2: Up to a 105 mm low-recoil cannon
|Engine||AF-40-8-1: Deutz 10-cylinder engine
AF-40-8-2: Deutz 12-cylinder, air-cooled engine
AF-40-8-1: 400 hp (300 kW)
AF-40-8-2: 550 hp (410 kW)
|Payload capacity||Land: 5.5 t (6.1 short tons)
Water: 2.2 t (2.4 short tons)
|Transmission||Zahnradfabrik Passau GmbH ZF 6WG-200 powered gearbox|
|Suspension||Hydropneumatic adjustable suspension|
|Ground clearance||Varies by suspension setting
Cruising: 40.5 cm (15.9 in)
Lurking: 15 cm (5.9 in)
Obstacle: 60 cm (24 in)
|Fuel capacity||550 l (150 US gal)|
|AF-40-8-1: 800 km (500 mi)
AF-40-8-2: 600 km (370 mi)
|Speed||Road: 90 km/h (56 mph)
Cross country: 65 km/h (40 mph)
Amphibious: 8 km/h (5.0 mph)
The Al-Fahd is an armoured fighting vehicle used by the Armed Forces of Saudi Arabia. It was the first armoured fighting vehicle developed and built in Saudi Arabia. The vehicle is produced by the Abdallah Al Faris Company for Heavy Industries, which is based in Dammam.
The Al Fahd is available in three configurations: The AF-40-8-1; an armoured personnel carrier (APC) or infantry fighting vehicle (IFV) variant, and the AF-40-8-2; an armoured fighting/reconnaissance vehicle (AFRV).
The AF-40-8-1 and AF-40-8-2 are similar in terms of 8-wheeled hull configuration, suspension and transmission. Internally, however, the vehicles differ in both engine type and engine placement. The AF-40-8-2's larger, 12-cylinder engine is mounted at the rear of the hull, where the AF-40-8-1's 10-cylinder engine is mounted at the front to allow for the troop compartment, and rear troop ramp which are not present on or required for the AFRV version.
The Al Fahd uses a variable hydropneumatic suspension which allows the vehicle to adjust its ground clearance by a total of 45 cm (18 in) - between 15 cm (5.9 in) and 60 cm (24 in) - depending on need.
The vehicle is designed to be able to negotiate slopes of up to 80% (forward) and 55% (side), and cross trenches between 2 m (6.6 ft) and 2.5 m (8.2 ft).
There is also an amphibious version of the Al Fahd available depending on customer requirements. The hydraulic propellers are optional, so not all Al Fahd's are capable of amphibious operation.
The Al Fahd uses a high-hardness steel alloy to offer protection against 14 mm ammunition on the frontal arc at ranges of 300 m (980 ft) and greater, and 7.62 mm ammunition at ranges of 25 m (82 ft) and greater on the sides and rear of the vehicle. The vehicle also incorporates multiple layers of Kevlar internally to protect the crew and passengers against spall.
The armament for both the AF-40-8-1 and AF-40-8-2 varies according to customer specifications. The AF-40-8-1 is capable of mounting anything up to and including a 40 mm cannon, and the AF-40-8-2 anything up to and including a low-recoil 105 mm cannon.
- "Al Fahd - Wheeled Armoured Reconnaissance/Personnel Carrier - Army Technology". Army-Technology.com. Retrieved 30 August 2010.
- "Specifications: Al Fahd - Wheeled Armoured Reconnaissance/Personnel Carrier - Army Technology". Army-Technology.com. Retrieved 30 August 2010.
- Singh, R.S.N. (March 2009). The Military Factor in Pakistan. Lancer Publishers. p. 379. ISBN 978-0981537894.