Alekseyev I-21

From Wikipedia, the free encyclopedia
  (Redirected from Alekseyev I-215)
Jump to: navigation, search
Alekseyev I-21
Role Jet Interceptor Fighter
National origin USSR
Manufacturer Alekseyev OKB-21
Designer Semyon Mikhailovich Alekseyev
First flight Autumn 1947
Number built 3
Variants Alekseyev I-212

The Alekseyev I-21 was a twin-engined, single-seat, jet fighter, designed and produced in the USSR from 1945 to 1948.

Development[edit]

After working as Lavochkin's right-hand man during World War II, Semyon Alekseyev was appointed as Chief Designer of OKB-21 at Gor'kiy. The Council of the People's Commissars directed Alekseyev (among others) to develop jet fighters using more powerful engines than the captured German examples and their Soviet-built copies. The result of Alekseyev's efforts was the I-21 (istrebitel, fighter), which was planned to be produced in several variants.

The I-21 was a twin-engined all metal single seat jet fighter, with straight wings, mid-set on a round streamlined fuselage, and engines mounted in front of the wings at about one third span. The slightly swept tail unit was cruciform in layout with the tailplane set at approximately half-fin span with slight dihedral. The aircraft's structure was constructed from high strength B-95 aluminium alloy, high strength steel for highly loaded parts and "Elektron" magnesium alloy for cast fittings. A hydraulically retractable tricycle undercarriage was fitted, using twin wheels for nose and main undercarriages. Hydraullically actuated airbrakes were fitted either side of the rear fuselage.

Construction of the first two airframes began at the end of 1946, with extreme pressure from the Ministry of Aircraft Production to complete Initial flight testing by 1 August 1947, to enable the aircraft to take part in the Aviation Day Flypast at Tushino on 18 August 1947. While one of the two airframes initially produced was used for static testing, the other was completed as the I-211 (I-21 version 1) with Lyul'ka TR-1 turbojet engines. (The Lyul'ka TR-2 was the intended powerplant, but was not available). Despite pressure from above, the I-211 was unable to participate in the Tushino display.

Flight testing started in the Autumn of 1947, but only six test flights had been carried out before the I-211 struck a pothole on landing, which collapsed the undercarriage. Repairs were carried out and the opprtunity taken to replace the troublesome TR-1 engines with Rolls-Royce Derwent V engines. The result was the I-215 which had been in development before the first flight of the I-211. Other minor modifications were carried out, the most noticeable being the larger engine nacelles. Despite good results from flight testing the I-215 lost out in production orders to the newer generation of swept winged fighters.

A third I-21 was built as the I-215D (dooblyor, second prototype), with a bicycle undercarriage, using wider-diameter paired wheels in a bicycle arrangement, retracting into the fuselage, along with small outrigger wheels under the engine nacelles which retracted into fairings. to order from OKB-1. This was used to test this arrangement for "Aircraft 150" and other projects (OKB-1 was supervised by Dr. Brunolf Baade, who later designed the VEB type 152 airliner, in the DDR, as a direct descendent of "Aircraft 150", and indirectly of the I-215D). The main undercarriage of the I-215D also incorporated a kneeling feature which could increase the incidence of the aircraft by 3o to assist take-off. Trials with this undercarriage arrangement proved successful and paved the way for its use in many other Soviet aircraft.

Armament of the I-211 comprised two, three, four, or six cannon in the chin, depending on variant.

Variants[edit]

  • I-210 - The initial version with Tumanskii RD-20 (BMW 003 copy) engines. Not proceeded with due to availability of Lyul'ka TR-1 engines.[1]
  • I-211 - The first flyable example completed as the I-211 with Lyul'ka TR-1 engines, rebuilt as the I-215.[2]
  • I-211S - I-211 with swept wing and tail[2]
  • I-215 - The re-built I-211 with Rolls-Royce Derwent V engines and other minor modifications.[3]
  • I-215D - Bi-cycle undercarriage I-215 built to order of OKB-1.[4]
  • I-216 - Proposed "Heavy" fighter version of the I-215 with two 75mm cannon and modified outer wings.[5]

Specifications (I-211)[edit]

Data from Gordon, Yefim. Early Soviet Jet Fighters

General characteristics

  • Crew: 1
  • Length: 11.54 m (37 ft 11.9 in)
  • Wingspan: 12.25 m (40 ft 2.28 in)
  • Height: ()
  • Wing area: 25 m2 (268.8 ft2)
  • Loaded weight: 6.890 kg (15,189 lb)
  • Powerplant: 2 × jet Lyul'ka TR-1, 1,300kgp (2,866 lb st) each

Performance

Armament

  • Guns: 2 x 23mm cannon

See also[edit]

Related development
Aircraft of comparable role, configuration and era
Related lists

References[edit]

  1. ^ Gordon 2002, p. 121
  2. ^ a b Gunston 1995, pp. 16–17
  3. ^ Gordon 2002, pp. 101–14
  4. ^ Gordon 2002, p. 130 –31
  5. ^ Gordon 2002, p.124

Bibliography[edit]

  • Gordon, Yefim. Early Soviet Jet Fighters. Hinkley, UK: Midland Publishing, 2002. ISBN 1-85780-139-3.
  • Gunston, Bill. The Osprey Encyclopedia of Russian Aircraft 1875–1995. London: Osprey, 1995. ISBN 1-85532-405-9.
  • Green, William & Swanborough, Gordon. "The Complete Book of Fighters". London:Salamander Books. 1994. ISBN 1-85833-777-1

External links[edit]