Alternating bit protocol

From Wikipedia, the free encyclopedia
Jump to: navigation, search

Alternating bit protocol (ABP) is a simple network protocol operating at the data link layer that retransmits lost or corrupted messages. It can be seen as a special case of the Sliding window protocol where a simple timer restricts the order of messages to ensure receivers send messages in turn while using a window of 1 bit. [1]

Messages are sent from transmitter A to receiver B. Assume that the channel from A to B is initialized and that there are no messages in transit. Each message from A to B contains a data part and a one-bit sequence number, i.e., a value that is 0 or 1. B has two acknowledge characters that it can send to A: ACK0 and ACK1.

When A sends a message, it resends it continuously, with the same sequence number, until it receives an acknowledgment from B that contains the same sequence number. When that happens, A complements (flips) the sequence number and starts transmitting the next message.

When B receives a message that is not corrupted and has sequence number 0, it starts sending ACK0 and keeps doing so until it receives a valid message with number 1. Then it starts sending ACK1, etc.

This means that A may still receive ACK0 when it is already transmitting messages with sequence number one. (And vice-versa.) It treats such messages as negative-acknowledge characters (NAKs). The simplest behaviour is to ignore them all and continue transmitting.

The protocol may be initialized by sending bogus messages and acks with sequence number 1. The first message with sequence number 0 is a real message.

See also[edit]

References[edit]

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.

  1. ^ Tel, Gerard (2000). Introduction to distributed algorithms. Cambridge. p. 85. ISBN 0521794838.