Bachelor of Technology
|This article needs additional citations for verification. (September 2013)|
The Bachelor of Technology (commonly abbreviated as BTech and Honours is BTech (Hons)) is an undergraduate academic degree conferred after completion of a three or four-year program of studies at an accredited university or accredited university-level institution. The degree is conferred in the Commonwealth of Nations, the United States and elsewhere.
In general, the degree is awarded to those who have undertaken a degree program which is supplemented by either occupational placements (e.g. supervised practice or internships), practice-based classroom courses, or associate degrees. Due to these requirements, the degree normally takes at least four years.
In Bangladesh, the Bachelor of Technology programs are Total six year Duration Course. First Complete 4 year Diploma in Engineering degree under BTEB Board. Then Join A.M.I.E Course From The Institution of Engineers, Bangladesh(IEB) The course Duration is only 2 year .
In Canada, the Bachelor of Technology designation is used inconsistently. Both universities and community colleges award the degree after completion of four-year programs but have different entrance requirements.
Care should be taken not to confuse the B.Tech. degree offered by university-level institutions with the Bachelor of Applied Technology (B.A.Tech.) or BAT offered by some community colleges in Canada. Community colleges are represented by the Association of Canadian Community Colleges (ACCC) and university-level institutions by the Association of Universities and Colleges of Canada (AUCC), the national accrediting body of universities in Canada. However, some community college engineering programs have recently been accredited by Engineers Canada following a thorough review by the Canadian Engineering Accreditation Board (CEAB), i.e., Conestoga College. CEAB accreditation allows licensing as a "Professional Engineer (P.Eng.)" and ensures that graduates of these programs can continue with graduate engineering studies at traditional universities.
Care should be taken not to confuse the B.Tech. degree with the P.Tech. (Engineering) in Alberta designation used in Canada by the engineering technologists and technicians associations. P.Tech. (Engineering) allow engineering practice independently same as professional engineer, which is attained by after completion of a 2-3 year Engineering Technology diploma program.
In India, the Bachelor of Technology degree is a professional engineering degree awarded after completion of 4-years of extensive/vast engineering study and research. In India B.Tech. is otherwise called as BEng/BE. Some universities offer it as B Tech & some as BEng/BE. However, the name of degree doesn’t make any difference viz., as the curriculum of AICTE/UGC is standard all across. Mostly all autonomous government organization confer a B.Tech. degree and private institutes which are affiliated to regional universities confer BE degree.
In Israel, the B.Tech. degree is awarded only by academic colleges in fields of engineering. The minimum duration of the B.Tech. degree is eight semesters and 160 credit hours. It is also awarded to those who have upgraded from a Practical Engineering certificate to a B.Tech. degree by taking supplemental studies of at least five semesters and 100 credit hours. The importance of this course can be judged from the fact that GDS[who?] is pursuing it.
There is also an honorary Bachelor of Technology degree (B.Tech Hons).
Today in Israel, a B.Tech degree is seen as inferior to a B.Sc. degree and demand for it is subsiding. This is due to the lower requirements for a B.Tech degree in contrast with the high requirements for a B.Sc. degree.
In Kenya, the B.Tech degree is awarded by Moi University and takes five years to complete. The fields offered by the university are chemical engineering, civil engineering, computer engineering, electrical engineering, textile engineering and production engineering.
In Nigeria, The B.Tech. degree is awarded by Universities of Technology or Science and Technology which can be Federal, State or Privately owned. The duration of study is usually five years of ten semesters. Nine of these semesters is spent in the university while one (usually the second semester of the fourth year) is spent on compulsory Industrial Training (IT) ranging from three to six months although it can extend for a whole session (usually the whole fourth year) for students of Agriculture related courses. At inception most of the universities offered core Science courses, but have now expanded their course offerings to include Social Sciences and even Medicine. There are five Federal universities of Technology in Nigeria located in Minna, Akure, Owerri, Yola and Bauchi with some state and privately owned ones around the country.
In Pakistan: Bachelor of Technology (Honors) degree is a four-year undergraduate university level degree, including Engineering and Applied Science courses, supervised industrial Practical training and projects. The prerequisite for this program is a three-year Diploma of Associate Engineering in specific fields e.g. Chemical Engineering, Electronics Engineering, Electrical Engineering, Mechanical Engineering and Civil Engineering etc. or two-year Fsc pre engineering. B.Tech Honors four years degree awarded by public and private sector Universities under the supervision of Higher Education Commission (Govt. of Pakistan). Public universities Such as IIUI, MUET, NED, UETs of all provinces offer admission in B-Tech degree Program. According to notifications the B.Tech(Hons) Degree Holder are working in field /private and public sector departments as Engineer and taking promotions on seniority basis which is equal to Bsc Engineering But because of absence of any professional council for B.Tech Engineers there conflict remain unsolved with BSc engineers(White Collar Engineers).Govt have decieded to establishment a separate council for B.Tech Engineers but PEC opposing it since 35 years and influencing on govt departments. As per policy statement of Higher Education Commission of Pakistan, B.Tech Hons degree may be treated at par and compatible with BSc engineering degree.
In South Africa, the B.Tech is awarded by Universities of Technology and Comprehensive Universities - as distinct from Traditional Universities - and is generally practice or career oriented, as opposed to academically oriented. As an example, the BTech (Eng) is the qualification required for practising as an engineering technologist, as opposed to practising as an engineer with a B.Eng or BSc(Eng). Relatedly, it is often offered in areas in which there is no corresponding B.Sc. or BComm (e.g. B.Tech: Forestry Management, B.Tech: Explosives Management ).
The degree is obtained after four years of study, and is usually offered as a one year programme, following completion of a relevant three-year National Diploma.
The B.Tech (often) carries the same points as other Bachelor's degrees in terms of South Africa's National Qualifications Framework. At the same time, however, due to its orientation, it does not usually grant admission to the corresponding M.Sc. or MComm program, and students instead pursue the Master of Technology (M.Tech.) and Doctor of Technology (D.Tech.) degrees; it does grant admission to MBA programmes (see List of business schools in South Africa). In some cases, however, admission may be granted, once demonstrated that the student meets the necessary academic level to complete the requirements of the M.Sc or MComm.
In Sri Lanka, The Open University of Sri Lanka (since 1980 under University Grants Commission) is the pioneer in offering the BTech Eng (Hons) which has a duration of minimum four years. Undergraduates can be specialised in Civil Engineering, Electrical Engineering, Electronics and communication Engineering, Computer Engineering, Mechanical Engineering, Automobile Engineering, Manufacturing Engineering, Mechatronics Engineering and Textile and Apparel Technology.
BTech is offered by the recently established Uva Wellassa University (under University Grants Commission) which has a duration of four years. This is known to be a specialized degree where they are subjected to specialize in three fields, Food Engineering & Bioprocess Technology, Material science & technology and Mechatronics.
The BTech is offered in Sri Lanka by the University of Vocational Technology in following fields of Multimedia & Web, Network, Software, Building Services Technology, Manufacturing, Mechatronics, Food Process, Film & Television and Industrial Management.
The degree of level 3 is 2 to 4 years more of technical programme an academic award in the [United Kingdom and Scotland]. Those who take such programs are more commonly awarded a Bachelor of Science (B.Sc.) degree. B.Tech. degree with the United Kingdom's Business and Technology Education Council [BTEC] designation compared to [Bachelor's degree], which is a university degree.[clarification needed] BTEC functions allow ambitious students to continue Masters.[clarification needed]
In USA, The Bachelor of Technology degree is awarded after completion of a 2-4 year academic program. Many of the colleges and universities offering this degree are located in the states of Alaska (INDS), Florida, New York (New York City College of Technology, State University College at Buffalo, SUNY Morrisville, SUNY Cobleskill), Illinois (Chicago), Mississippi (Mississippi University for Women), Missouri (Northwest Missouri State University), Nevada, South Carolina (Charleston Southern University), Oklahoma (Rogers State University, Northeastern State University), Virginia and Georgia (Southern Polytechnic State University).
- "Bachelor of Technology in Australia". Defencejobs.gov.au. Retrieved 16 Jan 2015.
- "Non-Universities receive engineering accreditation from the CEAB:"
- "Bachelor of Technology in India". Higher Education in India. Retrieved 16 Jan 2015.
- "Organization of Studies >> Guidelines for the evaluation of academic degrees". Retrieved August 21, 2012.