Bolt-on neck

From Wikipedia, the free encyclopedia
  (Redirected from Bolt-on)
Jump to: navigation, search
Typical bolt-on neck joint with a 4-screw plate on a Yamaha Pacifica 112 electric guitar

Bolt-on neck is a method of guitar (or similar stringed instrument) construction that involves joining a guitar neck and body using screws as opposed to glue as with set-in neck joints. The term is a misnomer, introduced mostly by Fender whose guitars traditionally had "bolt-on necks". Real bolted joints (i.e. using bolt coupled with a nut) are uncommon in guitar production.[1] However, at least one aftermarket manufacturer[2] offers a replacement for Fender neckplates and screws which uses captive inserts — embedded in the guitar body by means of an external self-tapping thread — and M4 machine screws. This is claimed to permit a higher fastening torque than ordinary woodscrews, and hence a better coupling between neck and body.

This method is used frequently on solid body electric guitars and on acoustic flattop guitars. In the typical electric guitar bolt-on neck joint, the body and neck cross in horizontal plane, the neck is inserted in a pre-routed "pocket" in the body, and they are joined using 3 or 4 (rarely 6) screws. As screw heads damage the wood and could put extra stress on it, typically a rectangular metal plate or a pair of metal plates are used to secure the joint and re-distribute the screw pressure evenly. Such a plate is usually criticized for making playing on top frets uncomfortable, so, manufacturers sometimes employ some kind of more intricate method to hide a metal plate, smooth the angles and make access to top frets easier. However, a visible metal plate is usually considered as a part of "vintage" style and they are a popular place to emboss manufacturer's logos, stamp out serial numbers and put other artwork. Many electric guitars with bolt-on necks, Fender guitars in particular, also have the production date written on the heel of the neck. The writing is hidden when the neck is attached to the body, so the bolt-on neck must be removed from the body in order to see the date. The neck date is often cross referenced with the serial number to accurately date the guitar.[3]

The typical acoustic guitar bolt-on neck as popularized by Taylor guitars includes threaded inserts in the heel of the neck. Bolts inserted through the neck block of the body from inside the instrument attach the neck to the body.[4]

Luthiers and guitar players cite both advantages and disadvantages of bolt-on neck construction. Note that most of these views are highly subjective and relative. It is not easy to measure most of the claims objectively or even compare objective factors, as guitars differ considerably.

Bolt-in neck[edit]

Some sources[5][6] differentiate bolt-on and bolt-in neck construction.

The difference is that a bolt-on neck involves constructing a protruding flange that fits inside a routed pocket in the guitar body. Then the neck is secured inside this pocket using screws that run perpendicular (at right angles) to the surface of the guitar. In contrast, a bolt-in neck doesn't need to have such a flange inside the guitar body, and screws or bolts run parallel to the surface of guitar, entering the back of the heel.[7]

Usually (but not always), in bolt-in variant, a neck pickup is mounted directly on the extended neck wood underneath it, not on the guitar body. This has been referred to as "direct coupling", because the pickup is mounted on the neck and not the body, in other words, directly coupled to the neck, and is considered superior by some in terms of tone.[8]

Bolt-in neck is used in electric guitars on a regular basis, but on acoustic guitars it is somewhat rare, and harder to produce. However it is considered superior by some in terms of sound and playability.[9] [← this ref is a dead link] However, given a relative uncommonness of bolt-in necks in electric guitars, most luthiers call both neck joints "bolt-on".

Advantages[edit]

Less traditional 3-screw with plate bolt-on neck joint on a Hagström III guitar

Typically cited advantages of bolt-on neck include:

  • Easier and cheaper to mass produce and repair if damaged.[10] Necks that allow Fender "standard" 4-screw joint are frequently interchangeable provided they are intended for the same style of guitar (e.g. Stratocaster or Telecaster):[11] for example, one can order custom neck (with personal profile or radius) and change one by just removing one neck and attaching the other. A Stratocaster neck can also be fitted to a Telecaster body, although the reverse is untrue unless some minor modifications are made. Less traditional versions exist, such as 3-screw plate (with easier micro-tilt adjustment) or even 6-screw plate bolt-on joint, but they may differ widely in the shapes, sizes and position of screws. Which one is better is debatable,[12] but budget guitar manufacturers often choose 3-screw joints for its minimal cost, notwithstanding the quality.
  • Easy to control: sometimes bolt-on neck includes some sort of adjustment screw that can control neck-to-body angle,[10] such as the Fender Deluxe American Stratocaster's "Micro-Tilt" adjustment.
  • More attack and "snap", slightly brighter tone,[1] but this advantage is frequently debated.[10]

Disadvantages[edit]

Slick bolt-on neck join on custom superstrat electric guitar allows more comfortable access to top frets
Stephen's Extended Cutaway on Washburn N4 electric guitar is also a version of bolt-on neck joint

Typically cited disadvantages of bolt-on neck include:

  • For solid body electric guitars, harder access to top frets, especially if screw plate is used and visible. Slick heel with hidden plate (such as depicted one) makes playing the top frets more comfortable and special neck joint techniques, such as the Ibanez AANJ, Music Man Silhouette and Stephen's Extended Cutaway mitigate this problem.
  • Less resonance due to minimized contact with body. Gluing or "set-neck" guitars allow for better overall contact between the guitar neck and the body.[citation needed]
  • Sloppy construction or assembly of a bolt-on guitar exacerbates any of its inherent disadvantages.[10]

Manufacturers[edit]

Notable manufacturers of guitars with bolt-on necks include:

  • Fender, a company known for its dedication to bolt-on neck construction.
  • Music Man
  • Ibanez
  • Carvin Corporation www.carvinguitars.com
  • ESP Guitars uses a 3-bolt plate with a contoured heel for better fret access.
  • Taylor Guitars is known as a manufacturer of acoustic guitars, though they use special patented bolt-in construction process with 3 bolts. Two steel bolts pass horizontally through the body and into the neck, and a third bolt passes vertically into the fingerboard extension.
  • Seagull, an acoustic guitar brand manufactured by Canadian company Godin Guitars.
  • Jackson, a well known electric guitar manufacturer that is currently a subsidiary of Fender mentioned above.
  • Walden Guitars, one of the first Asian acoustic guitar brands to incorporate a bolt-on heel / glued down fingerboard extension.
  • Cort Guitars

References[edit]

  1. ^ a b Burrluck, Dave (1998). "Types of neck". The player's guide to guitar maintenance: a practical manual to get the most from your electric guitar. London, England: Balafon Books. p. 25. ISBN 978-0-87930-549-9. 
  2. ^ Heavy-Duty Fixing Plates
  3. ^ Fender Serial Number Guide article at the Guitar Repair Bench Luthier Website
  4. ^ Bolt-on Neck Joint for Acoustic Instruments article at Liutaio Mottola Lutherie Information Website
  5. ^ Bolt-in neck at Sweetwater.com music technology glossary
  6. ^ Neck construction article at Ed Roman Guitars
  7. ^ William Cumpiano's hardware-based neck joint, featuring drawings that illustrate basics of bolt-in method.
  8. ^ Direct Coupling article at Ed Roman Guitars
  9. ^ Neck Mounting Myths article at Ed Roman Guitars
  10. ^ a b c d Lipman, Barry (2002). "What are the pros and cons of bolt-on necks". Guitar questions: the novice's guide to guitar repairs. New York, NY: Cherry Lane Music Co. p. 19. ISBN 978-1-57560-452-7. 
  11. ^ What we love about Fenders at Guitar DNA
  12. ^ Lipman, Barry (2002). "Is a three-bolt neck joint as strong as a four-bolt". Guitar questions: the novice's guide to guitar repairs. New York, NY: Cherry Lane Music Co. p. 20. ISBN 978-1-57560-452-7.