||This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (October 2012)|
A bottle cap seals the top opening of a bottle. A cap is typically colorfully decorated with the logo of the brand of beverage. Plastic caps are used for plastic bottles, metal with plastic backing is used for glass; the metal is usually steel,. Plastic caps may have a pour spout. Flip-Top caps like Flapper closures provide controlled dispensing of dry products. Caps for plastic bottles are often made of a different type of plastic than the bottle.
Caps were originally designed to be pressed over and around the top of a glass bottle to grab a small flange on the bottleneck.
The crown cork was patented by William Painter (inventor) on February 2, 1892 (U.S. Patent 468,258). It had 24 teeth and a cork seal with a paper backing to prevent contact between the contents and the metal cap. The current version has 21 teeth. To open these bottles, a bottle opener is generally used.
The height of the crown cap was reduced and specified in the German standard DIN 6099 in the 1960s. This also defined the "twist-off" crown cap, now used in the United States, Canada, and Australia. This cap is pressed around screw threads instead of a flange, and can be removed twisting the cap by hand, eliminating the need for an opener.
Screw on closures are the most common bottle caps. They are easy to apply by a wide variety of automated equipment, or they can be applied by hand. The application torque of closures however must be controlled in order for the closures to perform properly in the field. Closures must be applied tight enough to maintain a seal and to resist closure back-off, but must be not be applied so tightly that the end user cannot remove the closure. They are often found on top of beers, such as Coors or Deus Exes.
Closure lining materials
- Foamed polyethylene (F217)
Commonly used with plastic screw caps. F-217 is a soft polyethylene foam core covered on top and bottom with solid, clear polyethylene supplied in 0.050 inch thickness. F217 has become the industry standard due to its all purpose compatibility, resilient, compressible seal, cleanliness (no pulp dust) and economy. F217 liners have excellent chemical resistance and a low moisture transmission rate. F217 has good taste and odor resistance.
Plastisol is the standard lining material used in metal closures for vacuum packing glass bottles and jars. Plastisol is a flowed-in compound, usually a dispersion of PVC resins in plasticizers. It forms a solid, self-bonding, sealing gasket in the closures. Plastisol liners are used in metal twist-off and metal continuous thread screw caps for use on hot-pack food products where the preservation of a vacuum is essential.
- Pressure-sensitive liners (PS 22)
Styrene foam material coated on the down facing side with torque-activated adhesive. Pressure-sensitive inner seals adhere to plastic or glass bottles with normal application torque. Pressures sensitive liners are supplied pressed into closures and adhere to the bottle finish when the closure is applied. Pressure-sensitive liners stick to the container because one side is coated with pockets of adhesive. When the closure is applied to the container, the pockets of adhesive rupture between the closure and finish of bottle or jar. The pressure-sensitive liners then stick to the bottle or jar and remain in place when the closure is removed. No extra equipment is required. The closures are supplied with a standard liner as a backing. This material needs a dry land area on the bottle and therefore is suitable only for use with dry products such as vitamins, foods and pharmaceuticals.
- Polyseal cone liners
Molded in Low Density Polyethylene, Polyseal cone liners form to the inside of the bottle neck providing a leak-proof seal which guards against back-off and product evaporation. Excellent for use with acid products and essential oils, these closures are recommended for use on glass bottles only.
- Linerless designs – land seal (crab’s claw)
A popular general purpose linerless sealing mechanism which can be used on most all bottles. The design typically features a .045” molded inner flange which when applied with normal application torque compresses to approximately one-half of its thickness while sealing against the bottle lip. The liner creates a water tight seal with a bottle having a minimum .065” wide sealing surface which is free of nicks, burrs or irregularities. This style linerless mechanism is available in popular dispensing caps.
Soda companies particularly use caps for promotion. A message is printed on the inside of the cap and people with the right message may win a prize. Since the bottle must be purchased to determine the message and win, people usually purchase more of the drink to increase their chances of winning. Some companies print interesting facts, riddles or games on the inside of caps.
- * Yam, K. L., Encyclopedia of Packaging Technology. John Wiley & Sons, 2009. ISBN 978-0-470-08704-6.
- U.S. Patent 468,258 — Bottle sealing device.
- U.S. Patent 314,358 — Combined metallic cap and fastener.
|Wikimedia Commons has media related to Bottle caps.|