A brickworks also known as a brick factory, is a factory for the manufacturing of bricks, from clay or shale. Usually a brickworks is located on a clay bedrock (the most common material from which bricks are made) often with a quarry for clay on site.
Most brickworks have some or all of the following:
- A kiln, for firing, or 'burning' the bricks.
- Drying yard or shed, for drying bricks before firing.
- A building or buildings for manufacturing the bricks.
- A quarry for clay.
- A pugmill or clay preparation plant (see below).
In a typical modern brickworks, clay is taken from the quarry, and then carried by conveyor belt or truck/lorry to the main factory, although it may be stockpiled outside before entering the machinery. When the clay enters the preparation plant (Clay Prep) it is crushed, and mixed with water and other additives which may include breeze, a very fine anthracite that aids firing. This process, which is also known as pugmilling, improves the consistency, firing qualities, texture, and colour of the brick. From here, the processed clay can be extruded into a continuous strip and cut with wires, or put into moulds or presses (also referred to as forming) to form the clay into its final shape. After the forming or cutting, the bricks must be dried, either in the open air, in drying sheds, or in special drying kilns. When the bricks have been dried, they must then be fired or 'burnt' in a kiln, to give them their final hardness and appearance.
The brick manufacturing process was revolutionised in the mid nineteenth century with the development of automated brickmaking machines such as the Bradley & Craven Ltd ‘Stiff-Plastic Brickmaking Machine’.
- The First Hundred Years: the Early History of Bradley & Craven, Limited, Wakefield, England by Bradley & Craven Ltd (1963)