Bull's eye level
|This article needs additional citations for verification. (April 2014)|
A bull's eye level is a type of spirit level that allows for the leveling of planes in two dimensions — both the 'pitch' and 'roll' in nautical terms. Standard tubular levels only consider one dimension. Bull's eye levels are used primarily by carpenters in construction, but can also be found as features of compasses or other devices that need to be kept from tipping in certain directions (whether it be for functionality or precision of measurements). Small bull's eye levels are also found incorporated into tripods.
Another name for a bull's eye level is a "circular bubble" which is the name used by surveyors in the United Kingdom. Surveying instruments such as theodolites (transits) and total stations often have a circular bubble as well as a tubular level or "plate level". The circular bubble is used to roughly level the instrument in two dimensions and then the plate level, being more precise, is used to level the instrument more precisely in each dimension separately by leveling the plate level, then spinning the instrument 90 degrees and leveling the plate level again.
The Fell All-Way precision level, one of the first successful American made bull's eye levels for machine tool use, was invented by William B. Fell, Rockford, Illinois prior to WWII in 1939. The device was unique in that it could be placed on a machine bed and show tilt on the x-y axises simultaneously; eliminating the need to rotate the level 90 degrees. The level was so accurate it was restricted from export during World War II. The device set a new standard of .0005 inches per foot resolution (five ten thousands per foot or five arc seconds tilt). The level's production stopped around 1970. Production restarted in 1980s by Thomas Butler Technology, Rockford, Illinois, but finally ended in the mid 1990s. However, there are still hundreds of the highly prized devices in existence.
- "Machinist's precision level". Apr 20, 1943. Retrieved 3 April 2014.
|This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it.|