A caboose is a manned North American rail transport vehicle coupled at the end of a freight train. Cabooses provided shelter for crew at the end of a train, who were required for switching and shunting, and to keep a lookout for load shifting, damage to equipment and cargo, or overheating axles (hot boxes). Designs were originally modified box cars or flatbed cars carrying a cabin, but later became specialised vehicles, with projections above or to the sides of the car so crew could observe the train from shelter. The car also served as the conductor's office, and on long routes, included accommodation and cooking facilities.
A similar railroad car design, the brake van, was used on British and Commonwealth railways. These functioned in a similar role to cabooses, while also providing additional braking systems for trains not fitted with a continuous braking system, and keeping chain couplings taut.
Cabooses were used on every freight train until the 1980s, when safety laws requiring the presence of cabooses and full crews were relaxed. Developments in monitoring and safety technology, such as lineside defect detectors and flashing rear-end devices (FREDs) combined with rail companies' desire to save money by reducing crew numbers resulted in the phasing out of caboose cars. Nowadays, cabooses are generally only used on rail maintenance or hazardous materials trains, or on heritage and tourist railroads.
- 1 Function
- 2 History
- 3 Caboose types
- 4 Etymology
- 5 Preservation and reuse of cabooses
- 6 See also
- 7 References
- 8 External links
The caboose provided the train crew with a shelter at the rear of the train. The crew could exit the train for switching or to protect the rear of the train when stopped. They also inspected the train for problems such as shifting loads, broken or dragging equipment, and hot boxes (overheated axle bearings, a serious fire and derailment threat). The conductor kept records and handled business from a table or desk in the caboose. For longer trips, the caboose provided minimal living quarters, and was frequently personalized and decorated with pictures and posters.
Coal or wood was originally used to fire a cast iron stove for heat and cooking, later giving way to a kerosene heater. Now rare, the old stoves can be identified by several essential features. They were without legs, bolted directly to the floor, and featured a lip on the top surface to keep pans and coffee pots from sliding off. They also had a double-latching door, to prevent accidental discharge of hot coals caused by the rocking motion of the caboose.
Early cabooses were nothing more than flat cars with small cabins erected on them, or modified box cars. The standard form of the American caboose had a platform at either end with curved grab rails to facilitate train crew members' ascent onto a moving train. A caboose was fitted with red lights called markers to enable the rear of the train to be seen at night. This has led to the phrase "bringing up the markers" to describe the last car on a train (these lights were officially what made a train a "train").
Originally lit with oil lamps, with the advent of electricity, later caboose versions incorporated an electrical generator driven by belts coupled to one of the axles, which charged a lead-acid storage battery when the train was in motion.
Cabooses are nonrevenue equipment and were often improvised or retained well beyond the normal lifetime of a freight car. Tradition on many lines held that the caboose should be painted a bright red, though on many lines it eventually became the practice to paint them in the same corporate colors as locomotives. The Kansas City Southern Railway was unique in that it bought cabooses with a stainless steel car body, so were not obliged to paint them.
Brake or guard's vans (UK and Australia)
In the UK, the brake van performed a function similar to the caboose on North American railroads, being the accommodation for the train crew at the rear of the train, specifically the train guard, hence its alternative name.
In Great Britain, freight trains without a continuous train braking system in either the whole train or the rearmost section of the train (unfitted or partly fitted in UK railway parlance) were still prevalent until the early 1980s. On these trains, the brake van had two additional functions. First, the guard would use the brake van's brakes to assist with keeping the train under control on downwards gradients and whenever he could see the locomotive's crew was attempting to slow the train; second, the brakes were left set on at a low setting all the time to ensure the loose chain couplings often used between unfitted cars were kept taut, to minimise the risk of snapped coupling chains from the locomotive "snatching" or jerking, which was particularly problematic in the days of steam locomotives. Brake vans thus had a significant amount of ballast weight built into their structures to increase the available braking effort.
In 1968, the requirement for fully fitted freight trains to end with a guard's van was lifted and the guard would ride in the rearmost locomotive cab, which, since the UK mostly uses double-ended locomotives, has a good view of the train. These days, brake vans are only used in certain special cases, for example in trains with unusual cargos or track maintenance trains, and are consequently very rare.
In Australia, brake vans (or guard's vans - both terms were in common use) were often also used for carrying parcels and light freight and usually had large compartments and loading doors for such items. Some of the larger vans also included a compartment for passengers travelling on goods services or drovers travelling with their livestock.
Similar in function to a caboose, some long-distance passenger trains had crew cars, often dormitory or dorm-baggage cars, placed directly behind the locomotives or head-end cars to house the train's crew. These crew cars had accommodation for spare crew, cooking, sleeping and relaxation facilities.
FRED and the decline of cabooses
Until the 1980s, laws in the United States and Canada required all freight trains to have a caboose and a full crew, for safety. Technology eventually advanced such that the railroads, in an effort to save money and reduce crew members, stated that a caboose was unnecessary, since bearings were improved and lineside detectors were used to detect hot boxes, and better-designed cars avoided problems with the loads. The railroads also claimed a caboose was also a dangerous place, as slack run-ins could hurl the crew from their places and even dislodge weighty equipment. With the introduction of flashing rear-end devices (FREDs), often referred to by railroad companies as end-of-train devices (EOTs), the caboose was no longer necessary.
A FRED could be attached to the rear of the train to detect the train's air brake pressure and report any problems to the locomotive. The FRED also detects movement of the train upon start-up and radios this information to the engineers so they know all of the slack is out of the couplings and additional power could be applied. The machines also have blinking red lights to warn following trains that a train is ahead. With the introduction of the FRED, the conductor moved up to the front of the train with the engineer, and year by year, cabooses started to fade away. Very few cabooses remain in operation today, though they are still used for some local trains where it is convenient to have a brakeman at the end of the train to operate switches, and are also used on trains carrying hazardous materials.
Today, cabooses are rarely seen as still being used by Class 1 railroad carriers. CSX Transportation is one of the only Class 1 railroads that still maintains a fleet of cabooses for regular use. These are generally rebuilt bay-window cabooses with the actual carbodies welded shut (the crew stands on the rear platform) that are used as "Shoving Platforms" at the rear of local freight trains which must perform long reverse moves or heavy switching. BNSF also maintains a fleet of former wide-vision cabooses for a similar purpose, and in 2013 began repainting some of them in heritage paint schemes of BNSF's predecessor railroads.
The form of cabooses varied over the years, with changes made both to reflect differences in service and improvements in design. The most commonly seen types are:
Cupola or "standard" caboose
|“||During the '60s I was a conductor on the C&NW. One day late in the summer of 1863 I received orders to give my caboose to the conductor of a construction train and take an empty boxcar to use as a caboose. This car happened to have a hole in the roof about two feet square. I stacked the lamp and tool boxes under the perforation end and sat with my head and shoulders above the roof ... (Later) I suggested putting a box around the hole with glass in, so I could have a pilot house to sit in and watch the train.||”|
The position of the cupola varied. In most eastern railroad cabooses, the cupola was in the center of the car, but most western railroads preferred to put it toward the end of the car. Some conductors preferred to have the cupola toward the front, others liked it toward the rear of the train, and some just did not care. ATSF conductors could refuse to be assigned to a train if they did not have their cabooses turned to face the way they preferred. However, this would be a rare union agreement clause that could be used, but was not a regular issue.
The classic idea of the "little red caboose" at the end of every train came about when cabooses were painted a reddish-brown; however, some railroads (UP, and NKP, for example) painted their cabooses yellow or red and white. The most notable was the Santa Fe which in the 1960s started a rebuild program for their cabooses in which the cars were painted bright red with an eight-foot-diameter Santa Fe cross herald emblazoned on each side in yellow. Some railroads, chiefly the Wabash Railway, Norfolk and Western and Illinois Central Gulf, also built or upgraded cabooses with streamlined cupolas for better aerodynamics and to project a more modern image.
Bay window caboose
In a bay window caboose, the crew monitoring the train sits in the middle of the car in a section of wall that projects from the side of the caboose. The windows set into these extended walls resemble architectural bay windows, so the caboose type is called a bay window caboose. This type afforded a better view of the side of the train and eliminated the falling hazard of the cupola. It is thought to have first been used on the Akron, Canton and Youngstown Railroad in 1923, but is particularly associated with the Baltimore and Ohio Railroad, which built all of its cabooses in this design starting from an experimental model in 1930. The bay window gained favor with many railroads because it eliminated the need for additional clearances in tunnels and overpasses.
On the West Coast, the Milwaukee Road and the Northern Pacific Railway used these cars, converting over 900 roof top cabooses to bay windows in the late 1930s. Milwaukee Road rib-side bay window cabooses are preserved at New Lisbon, Wisconsin, the Illinois Railway Museum, the Mt. Rainier Scenic Railroad and Cedarburg, Wisconsin, among other places.
The Western Pacific Railroad was an early adopter of the type, building their own bay window cars starting in 1942 and acquiring this style exclusively from then on. Many other roads operated this type, including the Southern Pacific Railroad, St. Louis – San Francisco Railway, Katy Railroad, Kansas City Southern Railway, the Southern Railway, and the New York Central Railroad.
In the UK, brake vans are usually of this basic design: the bay window is known as a lookout or ducket.
In the extended-vision or wide-vision caboose, the sides of the cupola project beyond the side of the car body. Rock Island created some of these by rebuilding some standard cupola cabooses with windowed extensions applied to the sides of the cupola itself, but by far, the greatest number have the entire cupola compartment enlarged. This model was introduced by the International Car Company and saw service on most U.S. railroads. The expanded cupola allowed the crew to see past the top of the taller cars that began to appear after World War II, and also increased the roominess of the cupola area.
Additionally, Monon Railroad had a unique change to the extended-vision cabooses. They added a miniature bay to the sides of the cupola to enhance the views further. This created a unique look for their small fleet. Seven of the eight Monon-built cabooses have been saved. One was scrapped after an accident in Kentucky. The surviving cars are at the Indiana Transportation Museum (operational), the Indiana Railway Museum (operational), the Kentucky Railway Museum (fire damaged), and the Bluegrass Railroad Museum (unrestored but servicable). The remaining three are in private collections.
A transfer caboose looks more like a flat car with a shed bolted to the middle of it than it does a standard caboose. It is used in transfer service between rail yards or short switching runs, and as such, lacks sleeping, cooking or restroom facilities. The ends of a transfer caboose are left open, with safety railings surrounding the area between the crew compartment and the end of the car.
A recent variation on the transfer caboose is the "pushing" or "shoving" platform. It can be any railcar where a brakeman can safely ride for some distance to help the engineer with visibility at the other end of the train. Flatcars and covered hoppers have been used for this purpose, but often the pushing platform is a caboose that has had its windows covered and welded shut and permanently locked doors. CSX uses former Louisville & Nashville short bay window cabooses and former Conrail waycars as pushing platforms.
Drover's cabooses looked more like combine cars than standard cabooses. The purpose of a drover's caboose was much more like a combine, as well. On longer livestock trains in the American West, the drover's caboose is where the livestock's handlers would ride between the ranch and processing plant. The train crew rode in the caboose section while the livestock handlers rode in the coach section. Drover's cabooses used either cupolas or bay windows in the caboose section for the train crew to monitor the train. The use of drover's cars on the Northern Pacific Railway, for example, lasted until the Burlington Northern Railroad merger of 1970. They were often found on stock trains originating in Montana.
The first written evidence of the usage of "caboose" in a railroad context appeared in 1859 (not 1861, as cited by the Online Etymology Dictionary), as part of court records in conjunction with a lawsuit filed against the New York and Harlem Railway. This suggests "caboose" was probably in circulation among North American railroaders well before the mid-19th century.
Railroad historian David L. Joslyn (a retired Southern Pacific Railroad draftsman) has connected "caboose" to kabhuis, a Middle Dutch word referring to the compartment on a sailing ship's main deck in which meals were prepared. Kabhuis is believed to have entered the Dutch language circa 1747 as a derivation of the obsolete Low German word Kabhuse, which also described a cabin erected on a ship's main deck. However, further research indicates this relationship was more indirect than that described by Joslyn.
Eighteenth century French naval records make reference to a cambose or camboose, which described the food preparation cabin on a ship's main deck, as well as the range within. The latter sense apparently entered American naval terminology around time of the construction of the USS Constitution, whose wood-burning food preparation stove is officially referred to as the camboose.  These nautical usages are now obsolete: camboose and kabhuis became the galley when meal preparation was moved below deck, camboose, the stove, became the galley range, and kabhuis the cookshack morphed into kombuis, which means kitchen in Afrikaans and Dutch.
It is likely that camboose was borrowed by American sailors who had come into contact with their French counterparts during the American Revolution (recall that France was an ally and provided crucial naval support during the conflict). A New English Dictionary citation from the 1940s indicates camboose entered English language literature in a New York Chronicle article from 1805 describing a New England shipwreck, in which it was reported that "[Survivor] William Duncan drifted aboard the canboose [sic]." From this, it could be concluded that camboose was part of American English by the time the first railroads were constructed. As the first cabooses were wooden shanties erected on flat cars (as early as the 1830s,) they would have resembled the cook shack on the (relatively flat) deck of a ship, explaining the adoption and subsequent corruption of the nautical term.
There is some disagreement on what constitutes the proper plural form of the word "caboose." Similar words, like goose (pluralized as "geese"), and moose (pluralized as "moose," no change) point to the reason for the difficulty in coming to a consensus. The most common pluralization of caboose is "cabooses," with some arguing that this is incorrect, and, as with the word moose, it should stay the same in plural form—that is, "caboose" should represent one or many. A less-seriously used pluralization of the word is "cabeese," following the pluralization rule for the word goose, which is geese. This particular form is almost universally used in an attempt at humor. A lesser used pluralization argument is the word "cabi." This form derives from the pluralization rule for the word hippopotamus. Unlike "cabeese," "cabi" is serious and should never be used in an attempt at humor.
It was common for railroads to officially refer to cabooses as "cabin cars."
Of all the implements of railroading, none has had more nicknames than the caboose. Many are of American or Canadian origin and seek to describe the vehicle or its occupants in derisive ways. Often heard among crews was "crummy" (as in a crummy place to live, not elegant, often too hot or too cold, and perhaps not especially clean), "clown wagon," "hack," "waycar," "dog house," "go cart," "glory wagon," "monkey wagon" (a term that indirectly insulted the principal functionary who rode therein, no doubt coined by an engineer), "brain box" (the conductor was supposedly the brains of the train, as opposed to the "hogger" or engineer, who was presumed to be pigheaded), "palace," "buggy" (Boston & Maine/Maine Central), "van" (eastern and central Canada, usage possibly derived from the UK term for the caboose), and "cabin," or a variation heard at least on the Southern Railway, "cab." On the Long Island Railroad during the years of its freight operations the term "caboose" was considered an inappropriate term and if inadvertently used there would be an immediate correction, namely, "That's a Hack." It was not slang, it was the "proper" and accepted term. Now there were others, as well, some too profane to appear in print.
The small, two-axle cabooses used widely during the latter part of the 19th century were called "bobbers," which described their riding characteristics on the relatively uneven track of the time. Bobbers tended to produce an unpleasant pitching motion that was usually not present in more modern, two-truck models.
Preservation and reuse of cabooses
Although the caboose has largely fallen out of use, some are still retained by railroads in a reserve capacity. These cabooses are typically used in and around railyards. Other uses for the caboose include "special" trains, where the train is involved in some sort of railway maintenance, or as part of survey trains that inspect remote rail lines after natural disasters to check for damage. Others have been modified for use in research roles to investigate complaints from residents or business owners regarding trains in certain locations. Finally, some are coupled to trains for special events, including historical tours.
Cabooses have also become popular for collection by railroad museums and for city parks and other civic uses, such as visitor centers. Several railroad museums roster large numbers of cabooses, including the Illinois Railway Museum with 19 examples and the Western Pacific Railroad Museum at Portola, California, with 17. Many shortline railroads still use cabooses today. Large railroads also use cabooses as "shoving platforms" or in switching service where it is convenient to have crew at the rear of the train.
- Atchison, Topeka and Santa Fe Railway (1948). Rules: Operating Department. p. 7.
- "Caboose Gets A Bay Window In Place Of Familiar Cupola" Popular Mechanics, August 1937
- Beebe, Lucius (1945). Highball! A Pageant of Trains. pp. 207–223.
- USS Constitution Gun Deck
- Union Pacific Railroad. "The Caboose's Early Uses".
- Doug Kirby; Larry Bleiberg (June 28, 2012). "10 great places to stay at a vintage motel". USA Today.
|Wikimedia Commons has media related to Caboose.|
|Look up caboose in Wiktionary, the free dictionary.|
- The Red Caboose Motel a motel next to the Strasburg Railroad in Strasburg, PA where the guest rooms are retired cabooses
- The Featherbed Railroad Bed & Breakfast Resort a bed and breakfast on Clear Lake in Nice, CA where the guest rooms are retired cabooses
- The Warrenton Caboose How a restored N&W railroad caboose has become an integral part of a local community in Virginia
- The Caboose Station from the Potomac Eagle Scenic Railroad website: has information on introduction of the bay window caboose
- "The Wood Shanty Disappears" from Southern Pacific Bulletin, January, 1962, pp 22–26
- "The Colorful Caboose" from Trains Magazine (undated article)
- CBC Radio Archives Talking about the end of the caboose in Canada (1989)