A coiled coil is a structural motif in proteins, in which 2-7 alpha-helices are coiled together like the strands of a rope (dimers and trimers are the most common types). Many coiled coil type proteins are involved in important biological functions such as the regulation of gene expression e.g. transcription factors. Notable examples are the oncoproteins c-Fos and c-jun, as well as the muscle protein tropomyosin.
- 1 Discovery of coiled coils
- 2 Molecular structure of coiled coils
- 3 Biological roles of coiled coils
- 4 Coiled-coil Design
- 5 References
- 6 External links
Discovery of coiled coils
The possibility of coiled coils for α-keratin was initially somewhat controversial. Linus Pauling and Francis Crick independently came to the conclusion that this was possible at about the same time. In the summer of 1952, Pauling visited the laboratory in England where Crick worked. Pauling and Crick met and spoke about various topics; at one point Crick asked if Pauling had considered "coiled coils" (Crick came up with the term), to which Pauling said he had. Upon returning to the United States, Pauling resumed research on the topic. He concluded that coiled coils existed, and submitted a lengthy manuscript to the journal Nature (journal) in October. Pauling's son Peter Pauling worked at the same lab as Crick, and mentioned the report to him. Crick believed that Pauling had stolen his idea, and submitted a shorter note to Nature a few days after Pauling's manuscript arrived. Eventually after some controversy and frequent correspondences, Crick's lab declared that the idea had been reached independently by both researchers, and that no intellectual theft had occurred.  In his note (which was published first due to its shorter length), Crick proposed the Coiled Coil and as well as mathematical methods for determining their structure. Remarkably, this was soon after the structure of the alpha helix was suggested in 1951 by Linus Pauling and coworkers.
Molecular structure of coiled coils
Coiled coils usually contain a repeated pattern, hxxhcxc, of hydrophobic (h) and charged (c) amino-acid residues, referred to as a heptad repeat. The positions in the heptad repeat are usually labeled abcdefg, where a and d are the hydrophobic positions, often being occupied by isoleucine, leucine or valine. Folding a sequence with this repeating pattern into an alpha-helical secondary structure causes the hydrophobic residues to be presented as a 'stripe' that coils gently around the helix in left-handed fashion, forming an amphipathic structure. The most favorable way for two such helices to arrange themselves in the water-filled environment of the cytoplasm is to wrap the hydrophobic strands against each other sandwiched between the hydrophilic amino acids. It is thus the burial of hydrophobic surfaces, that provides the thermodynamic driving force for the oligomerization. The packing in a coiled-coil interface is exceptionally tight, with almost complete van der Waals contact between the side chains of the a and d residues. This tight packing was originally predicted by Francis Crick in 1952 and is referred to as Knobs into holes packing.
The α-helices may be parallel or anti-parallel, and usually adopt a left-handed super-coil (Figure 1). Although disfavored, a few right-handed coiled coils have also been observed in nature and in designed proteins.
Biological roles of coiled coils
Role of coiled coils in HIV infection
Viral entry into CD4-positive cells commences when three subunits of a glycoprotein 120 (gp120) bind to CD4 receptor and a coreceptor. gp120 is closely associated to a trimer of gp41 via van der Waals interactions. Upon binding of gp120 to the CD4 receptor and coreceptor, a number of conformational changes in the structure leads to the dissociation of gp120 and to the exposure of gp41 and at the same time to the fusion peptide sequence located at the N-terminus of gp41 to anchor into the host cell. A spring-loaded mechanism is responsible for bringing the viral and cell membranes in close proximity that they will fuse. The origin of the spring-loaded mechanism lies within the exposed gp41, which has two heptad repeat repeats located at the N-terminal (HR1) as well as the C-terminal (HR2) side of the protein. HR1 forms a parallel, trimeric coiled coil on to which HR2 region coils forming the trimer-of-hairpins (or six-helix bundle) structure thereby facilitating membrane fusion through bringing the membranes close to each other. The virus then enters the cell and begins its replication. Recently, inhibitors derived from HR2 such as Fuzeon (DP178, T-20) bind to the HR1 region on gp41 have been developed. Conversely, peptides derived from HR1 have little viral inhibition efficacy due to the propensity for these peptides to aggregate in solution. Chimeras of these HR1 derived peptides with GCN4 leucine zippers have been developed and have shown to be more active than Fuzeon, but these have not entered the clinic yet.
Because of their specific interaction coiled coils can be used as a dimerization "tag".
The general problem of deciding on the folded structure of a protein when given the amino acid sequence (the so-called protein folding problem) has not been solved. However, the coiled coil is one of a relatively small number of folding motifs for which the relationships between the sequence and the final folded structure are comparatively well-understood. Harbury et al.. performed a landmark study using an archetypal coiled coil, GCN4, in which rules were established that govern the way that peptide sequence affects the oligomeric state (that is, the number of alpha-helices in the final assembly). The GCN4 coiled coil is a 31-amino-acid (which equates to just over four heptads) parallel, dimeric (i.e., consisting of two alpha-helices) coiled coil and has a repeated isoleucine (or I, in single-letter code) and leucine (L) at the a and d positions, respectively, and forms a dimeric coiled coil. When the amino acids in the a and d positions were changed from I at a and L at d to L at a and I at d, a trimeric (three alpha-helices) coiled coil was formed. Furthermore, mutating the a and d positions both to L resulted in the formation of a tetrameric (four alpha-helices) coiled coil. These represent a set of rules for the determination of coiled coil oligomeric states and allows scientists to effectively "dial-in" the oligomerization behavior. Another aspect of coiled coil assembly that is relatively well understood, at least in the case of dimeric coiled coils, is that placing a polar residue (in particular asparagine, N) at opposing a positions forces parallel assembly of the coiled coil. This effect is due to a self-complementary hydrogen bonding between these residues, which would go unsatisfied if an N was paired with, for instance, an L on the opposing helix.
- Liu, J; Zheng Q, Deng Y, Cheng CS, Kallenbach NR, and Lu M (2006). "A seven-helix coiled coil". PNAS 103 (42): 15457–15462. doi:10.1073/pnas.0604871103. PMC 1622844. PMID 17030805.
- Hager, Thomas. "Narrative 43, Coils Upon Coils". Linus Pauling and the Structure of Proteins. Oregon State University Special Collections and Archives Research Center. Retrieved May 15, 2013.
- Crick, FHC (1952). "Is α-Keratin a Coiled Coil?". Nature 170 (4334): 882–883. doi:10.1038/170882b0. PMID 13013241.
- Pauling, L; Corey, RB; Branson, HR (1951). "The Structure of Proteins: Two Hydrogen-Bonded Helical Configurations of the Polypeptide Chain". PNAS 37 (4): 205–211. doi:10.1073/pnas.37.4.205. PMC 1063337. PMID 14816373.
- Mason, JB; Arndt, KM (2004). "Coiled coil domains: stability, specificity, and biological implications". Chembiochem 5 (2): 170–176. doi:10.1002/cbic.200300781. PMID 14760737.
- Harbury, PB; Plecs, JJ; Tidor, B: Alber, T; and Kim, PS (1998). "High-Resolution Protein Design with Backbone Freedom". Science 282 (5393): 1462–1467. doi:10.1126/science.282.5393.1462. PMID 9822371.
- Bromley, EHC; Channon, K; Moutevelis, E; Woolfson, DN (2008). "Peptide and Protein Building Blocks for Synthetic Biology: From Programming Biomolecules to Self-Organized Biomolecular Systems". ACS Chem. Biol. 3 (1): 38–50. doi:10.1021/cb700249v. PMID 18205291.
- Mahrenholz, CC; Abfalter, IG; Bodenhofer, U; Volkmer, R; and Hochreiter, S (2011). "Complex networks govern coiled coil oligomerization - predicting and profiling by means of a machine learning approach.". Molecular & Cellular Proteomics 10 (5). doi:10.1074/mcp.M110.004994. PMID 21311038.
- Harbury, PB; Zhang, T; Kim, PS; Alber, T (1993). "A switch between 2-stranded, 3-stranded and 4-stranded coiled coils in GCN4 leucine-zipper mutants". Science 262 (5138): 1401–1407. doi:10.1126/science.8248779. PMID 8248779.
- Harbury, PB; Kim, PS; Alber, T (1994). "Crystal-structure of an isoleucine-zipper trimer". Nature 371 (6492): 80–83. doi:10.1038/371080a0. PMID 8072533.
- Woolfson, DN (2005). "The design of coiled-coil structures and assemblies". Adv. Protein. Chem. 70: 79–112. doi:10.1016/S0065-3233(05)70004-8.
- Crick, FHC (1953). "The Packing of α-Helices: Simple Coiled-Coils". Acta Cryst 6 (8): 689–697. doi:10.1107/S0365110X53001964.
- Nishikawa, K.; Scheraga, HA. (1976). "Geometrical Criteria for Formation of Coiled-Coil Structures of Polypeptide Chains". Macromolecules 9 (3): 395–407. doi:10.1021/ma60051a004. PMID 940353.
- Harbury, PB; Zhang, T; Kim, PS; Alber, T. (1993). "A Switch Between Two-, Three-, and Four-Stranded Coiled Coils in GCN4 Leucine Zipper Mutants". Science 262 (5138): 1401–1407. doi:10.1126/science.8248779. PMID 8248779.
- Gonzalez, L; Plecs, JJ; Alber, T. (1996). "An engineered allosteric switch in leucine-zipper oligomerization". Nature Structural Biology 3 (6): 510–515. doi:10.1038/nsb0696-510. PMID 8646536.
- Harbury, PB; Plecs, JJ; Tidor, B; Alber, T; Kim, PS. (1998). "High-Resolution Protein Design with Backbone Freedom". Science 282 (5393): 1462–1467. doi:10.1126/science.282.5393.1462. PMID 9822371.
- Yu, YB. (2002). "Coiled-coils: stability, specificity, and drug delivery potential". Adv. Drug Deliv. Rev. 54 (8): 1113–1129. doi:10.1016/S0169-409X(02)00058-3. PMID 12384310.
- Burkhard, P; Ivaninskii, S; Lustig, A. (2002). "Improving Coiled-coil Stability by Optimizing Ionic Interactions". Journal of Molecular Biology 318 (3): 901–910. doi:10.1016/S0022-2836(02)00114-6. PMID 12054832.
- Gillingham, AK; Munro, S. (2003). "Long coiled-coil proteins and membrane traffic". Biochim. Biophys. Acta 1641 (2-3): 71–85. doi:10.1016/S0167-4889(03)00088-0. PMID 12914949.
- Mason, JM; Arndt, KM (2004). "Coiled coil domains: stability, specificity, and biological implications". Chembiochem 5 (2): 170–6. doi:10.1002/cbic.200300781. PMID 14760737.
Prediction and detection
- Spiricoil predict Coiled Coil and Oligormeric state from a protein sequences
- Paircoil2 / Paircoil
- STRAP contains an algorithm to predict coiled-coils from AA-sequences
- PrOCoil predicts the oligomerization of coiled coil proteins and visualizes the contribution of each individual amino acid to the overall oligomeric tendency.
- Spiricoil uses protein domain annotation to predict coiled coil presence and oligormeric state for all completely sequenced organisms
- CC+ is a relational database of coiled coils found in the PDB
- SUPERFAMILY protein domain annotation for all completely sequenced organisms based on the expertly curated SCOP coiled coil class