A Colossus Mark 2 computer being operated by Dorothy Du Boisson (left) and Elsie Booker. The slanted control panel on the left was used to set the "pin" (or "cam") patterns of the Lorenz. The "bedstead" paper tape transport is on the right.
|Developer||Tommy Flowers assisted by Sidney Broadhurst, William Chandler and for the Mark 2 machines, Allen Coombs|
|Manufacturer||Post Office Research Station|
|Type||Special-purpose electronic digital programmable computer|
|Release date||Mk 1: December 1943
Mk 2: 1 June 1944
|Discontinued||8 June 1945|
|Media||Electric typewriter output
Programmed, using switches and plug panels
|CPU||Custom circuits using valves and Thyratrons. A total of 1600 in Mk 1 and 2400 in Mk 2. Also relays and stepping switches|
|Memory||None (no RAM)|
|Display||Indicator lamp panel|
|Input||Paper tape of up to 20 000 × 5-bit characters in a continuous loop|
Colossus was the world's first programmable, electronic, digital computer. The Colossus computers were developed for British codebreakers during World War II to help in the cryptanalysis of the Lorenz cipher. Without them, the Allies would have been deprived of the very valuable military intelligence that was obtained from reading the vast quantity of encrypted high-level teleprinter messages between the German High Command (OKW) and their army commands throughout occupied Europe. Colossus used thermionic valves (vacuum tubes and thyratrons) to perform Boolean operations and calculations.
Colossus was designed by the engineer Tommy Flowers to solve a problem posed by mathematician Max Newman at the Government Code and Cypher School (GC&CS) at Bletchley Park. Alan Turing's use of probability in cryptanalysis contributed to its design. It has sometimes been erroneously stated that Turing designed Colossus to aid the Cryptanalysis of the Enigma. Turing's machine that helped decode Enigma was the electromechanical Bombe, not Colossus.
The prototype, Colossus Mark 1, was shown to be working in December 1943 and was operational at Bletchley Park in 5 February 1944. An improved Colossus Mark 2 that used shift registers to quintuple the speed, first worked on 1 June 1944, just in time for the Normandy Landings on D-Day. Ten Colossi were in use by the end of the war and an eleventh was being commissioned.
The destruction of most of the Colossus hardware and blueprints, as part of the effort to maintain a project secrecy that was kept up into the 1970s, deprived most of those involved with Colossus of credit for their pioneering advancements in electronic digital computing during their lifetimes. A functioning replica of a Colossus computer was completed in 2007 and is on display at The National Museum of Computing at Bletchley Park.
Purpose and origins
The Colossus computers were used to help decrypt radio teleprinter messages that had been encrypted using the electromechanical Lorenz SZ40/42 in-line cipher machine. To encipher a message with the Lorenz machine, the 5-bit plaintext characters were combined with a stream of key ciphertext characters using the XOR Boolean function. This is a Vernam cipher and the deciphering process involved an identically setup Lorenz SZ machine generating the same key sequence and XOR-ing it with the received ciphertext to reproduce the plaintext. The keystream was generated using twelve pinwheels.
British codebreakers referred to encrypted German teleprinter traffic as "Fish,. and called the SZ40/42 machine and the intercepted messages "Tunny". Colossus was used for finding possible Lorenz key settings – not completely decrypting the message. It compared two character streams, counting a statistic based on a programmable Boolean function. The ciphertext was read at high speed from a paper tape. The other stream was generated internally, and was an electronic simulation of part of the Lorenz machine. If the count for a setting was above a certain threshold, it would be sent as output to an electric typewriter.
The logical structure of the Lorenz machine was diagnosed at Bletchley Park without a machine being seen – something that did not happen until almost the end of the war. First, John Tiltman, a very talented GC&CS cryptanalyst derived a key stream of almost 4000 characters from a German operating blunder in August 1941. Then Bill Tutte, a newly arrived member of the Research Section used this key stream to work out the logical structure of the Lorenz machine. He correctly deduced that it had twelve wheels in two groups of five, which he named the χ (chi) and ψ (psi) wheels, and the remaining two the μ mu or "motor" wheels. The chi wheels stepped regularly with each letter that was encrypted, while the psi wheels stepped irregularly, under the control of the motor wheels.
In order to decrypt the ciphertext of the transmitted messages, there were two tasks that had to be performed. The first was "wheel breaking", which was the discovery of the cam patterns for all the wheels. These patterns were set up once on the Lorenz machine and then used for a fixed period of time and for a number of different messages. The second task was "wheel setting", which could be attempted once the cam patterns were known. Each message encrypted using Lorenz was enciphered at a different start position for the wheels, and it was this start position of the chi wheels that Colossus was initially designed to discover.
The XOR function used in the Vernam cipher for both enciphering and deciphering could also be used to upset the cipher's obscuring of the characteristics of the plaintext in the ciphertext. This was discovered by Alan Turing in July 1942 when he was on loan from the German Naval Enigma section to the Research Section at Bletchley Park. He was studying Tunny and invented a method of wheel-breaking that became known as Turingery. With a truly random key, the Vernam cipher removes the natural language property of a plaintext message of having an uneven frequency distribution of the different characters, to produce a uniform distribution in the ciphertext. Turing worked out that examining the character-to-character changes of character streams, instead of the frequency distribution of the characters in the ciphertext, showed a departure from uniformity which provided a way into the system. Providing the character-to-character changes was achieved by "differencing" in which each bit or character was XOR-ed with its successor.
By using differencing and knowing that the psi wheels did not advance with each character, Tutte worked out that trying just two differenced bits (impulses) of the chi-stream against the differenced ciphertext would produce a statistic that was non-random. This became known as Tutte's "1+2 break in". The process of wheel setting found the start position of the key wheels in relation to the start of the message. Initially Colossus was used only to work out the start positions of the chi wheels, but later, methods were devised for the other wheels. Later still an additional electronic unit was designed for wheel breaking, which was added to some Mark 2 Colossi.
The manual processes in decrypting messages were undertaken in a section at Bletchley Park led by Major Ralph Tester which was known as the "Testery". Colossus was developed for the "Newmanry", the section headed by the mathematician Max Newman at Bletchley Park responsible for machine methods against the Lorenz machine. The Colossus design arose out of a prior project that produced a counting machine dubbed "Heath Robinson". The main problems with Heath Robinson were the relative slowness of electro-mechanical parts and the difficulty of synchronising two paper tapes, one punched with the enciphered message, the other representing the patterns produced by the wheels of the Lorenz machine. The tapes tended to stretch when being read, at some 2000 characters per second, resulting in unreliable counts.
Design and construction
Tommy Flowers was a senior electrical engineer at the Post Office Research Station at Dollis Hill who had been appointed MBE in June 1943. Prior to his work on Colossus, he had been involved with GC&CS at Bletchley Park from February 1941 in an attempt to improve the Bombes that were used in the Cryptanalysis of the German Enigma cipher machine. He was recommended to Max Newman by Alan Turing who had been impressed by his work on the Bombes. The main components of Colossus's predecessor, Heath Robinson were as follows.
- A tape transport and reading mechanism that ran the looped key and message tapes at between 1000 and 2000 characters per second.
- A combining unit that implemented the logic of Tutte's method.
- A counting unit that had been designed by Dr C.E. Wynn-Williams of the Telecommunications Research Establishment (TRE) at Malvern which counted the number of times the logical function returned a specified truth value.
Flowers had been brought in to design the Heath Robinson's combining unit. He was not impressed by the system of a key tape that had to be kept synchronised with the message tape and, on his own initiative, he designed an electronic machine which eliminated the need for the key tape by having an electronic analogue of the Lorenz (Tunny) machine. He presented this design to Max Newman in February 1943, but the idea that the one to two thousand thermionic valves (vacuum tubes and thyratrons) proposed, could work together reliably, was greeted with great scepticism, so more Robinsons were ordered from Dollis Hill. Flowers, however, knew from his pre-war work that most thermionic valve failures occurred as a result of the thermal stresses at power up, so not powering a machine down reduced failure rates very substantially. Flowers persisted with the idea and obtained support from the Director of the Research Station, W Gordon Radley. Flowers and his team of some fifty people in the switching group spent eleven months from early February 1943 designing and building a machine that dispensed with the second tape of the Heath Robinson, by generating the wheel patterns electronically.
This prototype, Mark 1 Colossus, performed satisfactorily at Dollis Hill on 8 December 1943 and was taken apart and shipped to Bletchley Park, where it was delivered on 18 January and re-assembled by Harry Fensom and Don Horwood. It attacked its first message on 5 February 1944. As it was a large structure it was quickly dubbed Colossus by the WRNS operators. This machine contained 1600 thermionic valves (tubes). and was soon followed by an improved production Mark 2 machine. Nine of this version of the machine were constructed, the first being commissioned on 1 June 1944, after which Allen Coombs took over leadership of Colossus production. The original Mark 1 machine was converted into a Mark 2 and an eleventh Colossus was essentially finished when the war in Europe ended.
The main units of Flowers' design were as follows.
- A tape transport and photo-electric reading mechanism very similar to Heath Robinson's.
- A coder and adder that simulated the Lorenz machine using thyratron rings.
- A logic unit that performed Boolean operations.
- A master control that contained the electronic counters.
- A printer.
Most of the design of the electronics was the work of Tommy Flowers, assisted by William Chandler, with Sidney Broadhurst working on the auxiliary electromechanical parts. The Mark 2 Colossus was designed while Mark 1 was being constructed. It contained 2400 valves and was both 5 times faster and simpler to operate than the original version.
Flowers overcame the problem of synchronizing the electronics with the message tape by generating a clock signal from the reading of the sprocket holes of the message tape. The speed of operation was thus limited by the mechanics of reading the tape. The tape reader was tested up to 9700 characters per second (53 mph) before the tape disintegrated. So 5000 characters/second (40 ft/s (12.2 m/s; 27.3 mph)) was settled on as the speed for regular use.
The Mark 2 Colossus included the first ever use of what would now be called shift registers and systolic arrays, enabling five simultaneous tests, each involving up to 100 Boolean operations, on each of the five channels of the punched tape (although in normal operation fewer channels were examined in most runs). This gave an effective processing speed of 25,000 characters per second.
Colossus used state-of-the-art vacuum tubes (thermionic valves), thyratrons and photomultipliers to optically read a paper tape and then applied programmable logical functions to the bits of the key and ciphertext characters, counting how often the function returned "false".
Colossus was designed to perform the task of "Wheel Setting", that is determining the start point of the stream of key characters in relation to the characters of the enciphered message on the paper tape loop. Initially it was only the χ (chi) wheels that were examined. To keep the size of the task manageable, only two bits of the chi-stream were examined in the first run, then progressively the other bits. Success at this stage allowed the production of a version of the ciphertext from which the chi component of the key had been removed, the so-called "de-chi". This transformation allowed manual methods to be used to work out the settings of the ψ (psi) and μ mu "motor" wheels.
Later, methods were devised for using Colossus to determine the settings of the psi wheels. All of this required that "wheel breaking", the discovery of the cam patterns for all the wheels, had been successfully achieved. Later Mark 2 Colossi were equipped with a special unit to achieve this as well. Programming Colossus was by setting switches and plugging appropriate units together. Sometimes, two or more Colossus computers tried different possibilities simultaneously in what is now called parallel computing, speeding the decoding process by perhaps as much as double the rate of comparison.
Influence and fate
Colossus was the first of the electronic digital machines with programmability, albeit limited by modern standards.
- It had no internally stored programs. To set it up for a new task, the operator had to set up plugs and switches to alter the wiring.
- Colossus was not a general-purpose machine, being designed for a specific cryptanalytic task involving counting and Boolean operations.
A Colossus computer was thus not a fully general Turing complete machine. However, Professor Benjamin Wells of the Departments of Computer Science and Mathematics, University of San Francisco, has shown that a Universal Turing Machine could have been run on the set of ten Colossus computers. This means that Colossus satisfies the definition of Turing completeness. Most of the other computing machines of this era were also not Turing complete (e.g. the Atanasoff–Berry Computer, the Bell Labs relay machines (by George Stibitz et al.), or the first designs of Konrad Zuse). The notion of a computer as a general purpose machine—that is, as more than a calculator devoted to solving difficult but specific problems—did not become prominent until after World War II.
Colossus was preceded by several computers, many of them first in some category. Zuse's Z3 was the first functional fully program-controlled computer, and was based on electromechanical relays, as were the (less advanced) Bell Labs machines of the late 1930s (George Stibitz, et al.). The Atanasoff–Berry Computer was electronic and binary (digital) but not programmable. Assorted analog computers were semiprogrammable; some of these much predated the 1930s (e.g., Vannevar Bush). Babbage's Analytical engine design predated all these (in the mid-19th century), it was a decimal, programmable, entirely mechanical construction—but was only partially built and never functioned during Babbage's lifetime. Colossus was the first combining digital, (partially) programmable, and electronic. The first fully programmable digital electronic computer was the ENIAC which was completed in 1946.
The use to which the Colossus computers were put was of the highest secrecy, and the Colossus itself was highly secret, and remained so for many years after the War. Thus, it could not be included in the history of computing hardware for many years, and Flowers and his associates were deprived of the recognition they were due.
Being not widely known, Colossus had little direct influence on the development of later computers; it was EDVAC that was the early design which had the most influence on subsequent computer architecture. However, the technology of Colossus, and the knowledge that reliable high-speed electronic digital computing devices were feasible, did have a significant influence on the development of some early computers in the United Kingdom and probably in the US. A number of people who were associated with the project and knew all about Colossus played significant roles in early computer work in the UK. In 1972, Herman Goldstine wrote that:
Britain had such vitality that it could immediately after the war embark on so many well-conceived and well-executed projects in the computer field.
In writing that, Goldstine was unaware of Colossus, and its legacy to those projects of people such as Alan Turing (with the Pilot ACE and ACE), and Max Newman and I. J. Good (with the Manchester Mark 1 and other early Manchester computers). Brian Randell later wrote that:
the COLOSSUS project was an important source of this vitality, one that has been largely unappreciated, as has the significance of its places in the chronology of the invention of the digital computer.
Colossus documentation and hardware were classified from the moment of their creation and remained so after the War. Tommy Flowers was ordered to destroy all documentation and burnt them in a furnace at Dollis Hill. He later said of that order:
That was a terrible mistake. I was instructed to destroy all the records, which I did. I took all the drawings and the plans and all the information about Colossus on paper and put it in the boiler fire. And saw it burn.
Some parts, sanitised as to their original use, were taken to Newman's Royal Society Computing Machine Laboratory at Manchester University. Most of the Colossus computers were dismantled and parts returned to the Post Office. Two, along with two replica Tunny machines, were retained, moving to GCHQ's new headquarters at Eastcote in April 1946, and moving again with GCHQ to Cheltenham between 1952 and 1954. One of the Colossi, known as Colossus Blue, was dismantled in 1959; the other in 1960. There had been attempts to adapt them to other purposes, with varying success; in their later years they had been used for training. Jack Good relates how he was the first to use it after the war, persuading the NSA that Colossus could be used to perform a function for which they were planning to build a special-purpose machine. Colossus was also used to perform character counts on one-time pad tape to test for non-randomness.
For nearly three decades after the war Colossus remained secret, long after any of its technical details were of any importance. The need for such secrecy ebbed away as communications moved to digital transmission and all-digital encryption systems became common in the 1960s. Information about Colossus began to emerge publicly in the 1970s, after the secrecy imposed was broken when Group Captain Winterbotham published his 1974 book The Ultra Secret. More recently, a 500-page technical report on the Tunny cipher and its cryptanalysis – entitled General Report on Tunny – was released by GCHQ to the national Public Record Office in October 2000; the complete report is available online,</ref> and it contains a fascinating paean to Colossus by the cryptographers who worked with it:
It is regretted that it is not possible to give an adequate idea of the fascination of a Colossus at work; its sheer bulk and apparent complexity; the fantastic speed of thin paper tape round the glittering pulleys; the childish pleasure of not-not, span, print main header and other gadgets; the wizardry of purely mechanical decoding letter by letter (one novice thought she was being hoaxed); the uncanny action of the typewriter in printing the correct scores without and beyond human aid; the stepping of the display; periods of eager expectation culminating in the sudden appearance of the longed-for score; and the strange rhythms characterizing every type of run: the stately break-in, the erratic short run, the regularity of wheel-breaking, the stolid rectangle interrupted by the wild leaps of the carriage-return, the frantic chatter of a motor run, even the ludicrous frenzy of hosts of bogus scores. in : Impressions of Colossus</ref>
Construction of a fully functional replica of a Colossus Mark 2 was undertaken by a team led by Tony Sale. In spite of the blueprints and hardware being destroyed, a surprising amount of material survived, mainly in engineers' notebooks, but a considerable amount of it in the U.S. The optical tape reader might have posed the biggest problem, but Dr. Arnold Lynch, its original designer, was able to redesign it to his own original specification. The reconstruction is on display, in the historically correct place for Colossus No. 9, at The National Museum of Computing, in H Block Bletchley Park in Milton Keynes, Buckinghamshire.
In November 2007, to celebrate the project completion and to mark the start of a fundraising initiative for The National Museum of Computing, a Cipher Challenge pitted the rebuilt Colossus against radio amateurs worldwide in being first to receive and decode three messages enciphered using the Lorenz SZ42 and transmitted from radio station DL0HNF in the Heinz Nixdorf MuseumsForum computer museum. The challenge was easily won by radio amateur Joachim Schüth, who had carefully prepared for the event and developed his own signal processing and code-breaking code using Ada. The Colossus team were hampered by their wish to use World War II radio equipment, delaying them by a day because of poor reception conditions. Nevertheless, the victor's 1.4 GHz laptop, running his own code, took less than a minute to find the settings for all 12 wheels. The German codebreaker said: "My laptop digested ciphertext at a speed of 1.2 million characters per second—240 times faster than Colossus. If you scale the CPU frequency by that factor, you get an equivalent clock of 5.8 MHz for Colossus. That is a remarkable speed for a computer built in 1944."
The Cipher Challenge verified the successful completion of the rebuild project. "On the strength of today's performance Colossus is as good as it was six decades ago", commented Tony Sale. "We are delighted to have produced a fitting tribute to the people who worked at Bletchley Park and whose brainpower devised these fantastic machines which broke these ciphers and shortened the war by many months."
There was a fictional computer named Colossus in the movie Colossus: The Forbin Project. Also see List of fictional computers. Neal Stephenson's novel Cryptonomicon (1999) also contains a fictional treatment of the historical role played by Turing and Bletchley Park.
- History of computing hardware
- List of vacuum tube computers
- Lorenz Cipher
- The National Museum of Computing
- See Banburismus
- Golden, Frederic (29 March 1999), "Who Built The First Computer?", Time Magazine 153 (12)
- Copeland, Jack, Colossus: The first large scale electronic computer, retrieved 21 October 2012
- Copeland 2006, p. 75.
- Flowers 1983, p. 246.
- The National Museum of Computing: The Colossus Gallery, retrieved 18 October 2012
- Good, Michie & Timms 1945, 1 Introduction: 11 German Tunny, 11B The Tunny Cipher Machine, p. 6.
- Good, Michie & Timms 1945, 1 Introduction: 11 German Tunny, 11A Fish Machines, (c) The German Ciphered Teleprinter, p. 4.
- Sale, Tony, The Lorenz Cipher and how Bletchley Park broke it, retrieved 21 October 2010
- Tutte 2006, p. 357.
- Good, Michie & Timms 1945, 1 Introduction: 11 German Tunny, 11E The Tunny Network, (b) Wheel-breaking and Setting, p. 15.
- Copeland 2006, pp. 378–385.
- Budiansky 2006, pp. 58–59.
- Good, Michie & Timms 1945, 3 Organisation: 31 Mr Newman's section, p. 276.
- Randell 1980, p. 9.
- Budiansky 2000, p. 314.
- Exhibit in the National Cryptologic Museum, Fort Meade, Maryland, USA
- Good, Michie & Timms 1945, 1 Introduction: 15 Some Historical Notes, 15A First Stages in Machine Development, (c) Heath Robinson, p. 33.
- Flowers, p. 96.
- Flowers 1983, p. 244.
- Copeland 2006, p. 72.
- Randell 2006.
- Flowers 2006, p. 80.
- Randell & 2006 P-143.
- Copeland 2010.
- The Colossus Rebuild http://www.tnmoc.org/colossus-rebuild-story
- Fensom 2010.
- Good, Michie & Timms 1945, 1 Introduction: 15 - Some Historical Notes, 15C Period of Expansion, (b) Colossus, p. 35.
- Randell, Brian; Fensom, Harry; Milne, Frank A. (15 March 1995), "Obituary: Allen Coombs", The Independent (London), retrieved 18 October 2012
- Randell 2006, pp. 146, 147.
- For comparison, later stored-program computers such as the Manchester Mark 1 of 1949 used 4050 valves, Lavington, S. H. (July 1977), "The Manchester Mark 1 and Atlas: a Historical Perspective" (PDF), Communications of the ACM - Special issue on computer architecture 21 (1): 4–12, doi:10.1145/359327.359331, retrieved 8 February 2009 while ENIAC (1946) used 17,468 valves.
- Flowers 2006, p. 100.
- Small1944, p. 19.
- Small 1944, p. 20.
- A Brief History of Computing. Jack Copeland, June 2000
- Wells, Benjamin (2009). "Proceedings of the 8th International Conference on Unconventional Computation 2009 (UC09), Ponta Delgada, Portugal: Advances in I/O, Speedup, and Universality on Colossus, an Unconventional Computer". Lecture Notes in Computer Science (Berlin, Heidelberg: Springer-Verlag) 5175: 247–261. ISBN 978-3-642-03744-3. Retrieved 2009-11-10.
- Goldstine 1980, p. 321.
- Randell 1980, p. 87.
- McKay 2010, pp. 270–271.
- "A Brief History of Computing". alanturing.net. Retrieved 26 January 2010.
- Copeland 2006, pp. 173–175.
- Horwood 1973.
- Good, Michie & Timms 1945.
- Good, Michie & Timms 1945, 5 Machines
- 51 Introductory, (j) Impressions of Colossus, p. 327.
- Sale, Tony, The Colossus its purpose and operation
- The Colossus Gallery, The National Museum of Computing, retrieved 30 March 2015
- "The Colossus Rebuild Project – by Tony Sale". Retrieved 30 October 2011
- Colossus - The Rebuild Story, The National Museum of Computing, retrieved 30 March 2015
- "Cipher Challenge". Archived from the original on 1 August 2008. Retrieved 1 February 2012.
- "SZ42 Codebreaking Software".
- "Cracking the Lorenz Code (interview with Schüth)".
- Ward, Mark (16 November 2007). "BBC News Article". Retrieved 2 January 2010.
- "German Codebreaker receives Bletchley Park Honours".
- "Latest Cipher Challenge News 16.11.2007". Archived from the original on 2008-04-18.
- Budiansky, Stephen (2000), Battle of wits: The Complete Story of Codebreaking in World War II, Free Press, ISBN 978-0684859323
- Budiansky, Stephen (2006), Colossus, Codebreaking, and the Digital Age in Copeland 2006, pp. 52–63
- Chandler, W. W. (1983), "The Installation and Maintenance of Colossus", IEEE Annals of the History of Computing 5 (3): 260–262, doi:10.1109/MAHC.1983.10083
- Coombs, Allen W. M. (July 1983), "The Making of Colossus", IEEE Annals of the History of Computing 5 (3): 253–259, doi:10.1109/MAHC.1983.10085
- Copeland, B. Jack (2011) , Colossus and the Dawning of the Computer Age in Erskine & Smith 2011, pp. 305–327
- Copeland, B. J. (Oct–Dec 2004), "Colossus: its origins and originators", IEEE Annals of the History of Computing 26 (4): 38–45, doi:10.1109/MAHC.2004.26
- Copeland, Jack (2006), Machine against Machine in Copeland 2006, pp. 64–77
- Copeland, B. Jack, ed. (2006), Colossus: The Secrets of Bletchley Park's Codebreaking Computers, Oxford: Oxford University Press, ISBN 978-0-19-284055-4
- Copeland, B. Jack (2010), "Colossus: Breaking the German ‘Tunny’ Code at Bletchley Park. An Illustrated History", The Rutherford Journal 3
- Erskine, Ralph; Smith, Michael, eds. (2011), The Bletchley Park Codebreakers, Biteback Publishing Ltd, ISBN 9781849540780 Updated and extended version of Action This Day: From Breaking of the Enigma Code to the Birth of the Modern Computer Bantam Press 2001
- Fensom, Jim (8 November 2010), "Harry Fensom obituary", The Guardian (London), retrieved 17 October 2012
- Fensom, Harry (2006), How Colossus was Built and Operated - One of its Engineers Reveals its Secrets in Copeland 2006, pp. 297–303
- Flowers, Thomas H. (1983), "The Design of Colossus", Annals of the History of Computing 5 (3): 239–252, doi:10.1109/MAHC.1983.10079
- Flowers, Thomas H. (2006), D-Day at Bletchley Park in Copeland 2006, pp. 78–83
- Flowers, Thomas H. (2006), Colossus in Copeland 2006, pp. 91–100
- Gannon, Paul (2006), Colossus: Bletchley Park's Greatest Secret, London: Atlantic Books, ISBN 9781843543305
- Goldstine, Herman H. (1980), The Computer from Pascal to von Neumann, Princeton University Press, ISBN 978-0-691-02367-0
- Good, Jack; Michie, Donald; Timms, Geoffrey (1945), General Report on Tunny: With Emphasis on Statistical Methods, UK Public Record Office HW 25/4 and HW 25/5, retrieved 15 September 2010 That version is a facsimile copy, but there is a transcript of much of this document in '.pdf' format at: Sale, Tony (2001), Part of the "General Report on Tunny", the Newmanry History, formatted by Tony Sale (PDF), retrieved 20 September 2010, and a web transcript of Part 1 at: Ellsbury, Graham, General Report on Tunny With Emphasis on Statistical Methods, retrieved 3 November 2010
- Good, I. J. (1979), "Early Work on Computers at Bletchley", IEEE Annals of the History of Computing 1 (1): 38–48, doi:10.1109/MAHC.1979.10011
- Good, I. J. (1980), "Pioneering Work on Computers at Bletchley", in Metropolis, Nicholas; Howlett, J.; Rota, Gian-Carlo, A History of Computing in the Twentieth Century, New York: Academic Press, ISBN 0124916503
- Horwood, D.C. (1973), A technical description of Colossus I: PRO HW 25/24 (YOUTUBE VIDEO)
- McKay, Sinclair (2010), The Secret Life of Bletchley Park: The WWII Codebreaking Centre and the men and women who worked there, London: Aurum Press, ISBN 9781845135393
- Randell, Brian (1982) , "Colossus: Godfather of the Computer", The Origins of Digital Computers: Selected Papers, New York: Springer-Verlag, ISBN 9783540113195
- Randell, Brian (1980), "The Colossus", in Metropolis, N.; Howlett, J.; Rota, Gian-Carlo, A History of Computing in the Twentieth Century (PDF), pp. 47–92, ISBN 978-0124916500
- Randell, Brian (2006), Of Men and Machines in Copeland 2006, pp. 141–149
- Sale, Tony (2000), "The Colossus of Bletchley Park – The German Cipher System", in Rojas, Raúl; Hashagen, Ulf, The First Computers: History and Architecture, Cambridge, Massachusetts: The MIT Press, pp. 351–364, ISBN 0-262-18197-5
- Small, Albert W. (December 1944), The Special Fish Report describes the operation of Colossus in breaking Tunny messages
- Tutte, William T. (2006), Appendix 4: My Work at Bletchley Park in Copeland 2006, pp. 352–369
- Wells, B (2004), "A Universal Turing Machine Can Run on a Cluster of Colossi", Abstracts of the American Mathematical Society 25: 441
- Wells, Benjamin (2006), The PC-User's Guide to Colossus in Copeland 2006, pp. 116–140
- Colossus: Creating a Giant on YouTube A short film made by Google to celebrate Colossus and those who built it, in particular Tommy Flowers.
- Cragon, Harvey G. (2003), From Fish to Colossus: How the German Lorenz Cipher was Broken at Bletchley Park, Dallas: Cragon Books, ISBN 0-9743045-0-6 – A detailed description of the cryptanalysis of Tunny, and some details of Colossus (contains some minor errors)
- Enever, Ted (1999), Britain's Best Kept Secret: Ultra's Base at Bletchley Park (3rd ed.), Sutton Publishing, Gloucestershire, ISBN 978-0-7509-2355-2 – A guided tour of the history and geography of the Park, written by one of the founder members of the Bletchley Park Trust
- Gannon, Paul (2007), Colossus: Bletchley Park's Greatest Secret, Atlantic Books, ISBN 978-1-84354-331-2
- Rojas, R.; Hashagen, U. (2000), The First Computers: History and Architectures, MIT Press, ISBN 0-262-18197-5 – Comparison of the first computers, with a chapter about Colossus and its reconstruction by Tony Sale.
- Sale, Tony (2004), The Colossus Computer 1943–1996: How It Helped to Break the German Lorenz Cipher in WWII, Kidderminster: M.&M. Baldwin, ISBN 0-947712-36-4 A slender (20 page) booklet, containing the same material as Tony Sale's website (see below)
- Smith, Michael (2007) , Station X: The Codebreakers of Bletchley Park, Pan Grand Strategy Series (Pan Books ed.), London: Pan McMillan Ltd, ISBN 978-0-330-41929-1
- The National Museum of Computing
- Tony Sale's Codes and Ciphers Contains a great deal of information, including:
- Colossus, the revolution in code breaking
- Lorenz Cipher and the Colossus
- The machine age comes to Fish codebreaking
- The Colossus Rebuild Project
- The Colossus Rebuild Project: Evolving to the Colossus Mk 2
- Walk around Colossus A detailed tour of the replica Colossus – make sure to click on the "More Text" links on each image to see the informative detailed text about that part of Colossus
- IEEE lecture – Transcript of a lecture Tony Sale gave describing the reconstruction project
- BBC news article reporting on the replica Colossus
- BBC news article: "Colossus cracks codes once more"
- BBC news article: BBC news article: "Bletchley's code-cracking Colossus" with video interviews 2010-02-02
- Website on Copeland's 2006 book with much information and links to recently declassified information
- Was the Manchester Baby conceived at Bletchley Park?
- Walk through video of the Colossus rebuild at Bletchley Park on YouTube
|Wikimedia Commons has media related to Colossus computer.|