Glossary of rail transport terms

From Wikipedia, the free encyclopedia
  (Redirected from Consist)
Jump to: navigation, search

Rail terminology is a form of technical terminology. The difference between the American term railroad and the international term railway (used by the International Union of Railways and English-speaking countries outside the US) is the most obvious difference in rail terminology (see usage of the terms railroad and railway for more information). There are also others, due to the parallel development of rail transport systems in different parts of the world.

Various terms are presented here alphabetically; where a term has multiple names, this is indicated. The note "US" indicates a term peculiar to North America, or "CA" may represent Canada while "UK" refers to terms originating in the British Isles and normally also used in former British colonies outside North America (such as Australia "AU", New Zealand "NZ", etc.). The abbreviation "UIC" refers to standard terms adopted by the International Union of Railways in its official publications and thesaurus.[1]

Exceptions are noted; terms whose currency is limited to one particular country, region, or railway are also included.


0-9[edit]

For 4-4-0, 2-6-4T, 0-4-4-0, etc., see Whyte notation.
3-step protection (US)
The protection given by a locomotive engineer to an employee working near, between, or under cars to which the locomotive is coupled, via a three-step process:
  1. Fully apply independent brake.
  2. Set reverser to neutral.
  3. Turn off generator field (or notify the ground employee, depending on company-specific rules and locomotive type, that protection is provided).[2][3]
10 wheeler (US)
A steam locomotive with a 4-6-0 wheel arrangement[4]
241 (US)
Procession of a train past a stop signal with verbal permission from the dispatcher.[5] Derives from Rule 241, which is used to grant such permission under certain rule sets.[6]

A[edit]

A BNSF Railway A unit
A unit (US)
A diesel locomotive (or more rarely an electric locomotive) equipped with a driving cab and a control system to control other locomotives in a multiple unit, and therefore able to be the lead unit in a consist of several locomotives controlled from a single position[7]
Absolute block signalling
A British signalling scheme designed to ensure the safe operation of a railway by allowing only one train to occupy a defined section of track (block) at a time[8]
Adhesion railway
The most common type of railway, where power is applied by driving some or all of the wheels of the locomotive[9]
Adhesive weight
The weight on the driving wheels of a locomotive, which determines the frictional grip between wheels and rail, and hence the drawbar pull which a locomotive can exert[10]
Air brake
A power braking system with compressed air as the operating medium[11]
Alerter or watchdog
Similar to the dead man's switch other than it does not require the operator's constant interaction. Instead, an alarm is sounded at a preset interval in which the operator must respond by pressing a button to reset the alarm and timer if no other controls are operated. If the operator does not respond within a preset time, the prime mover is automatically throttled back to idle and the brakes are automatically applied.[12]
All weather adhesion
The adhesion available during traction mode with 99% reliability in all weather conditions[13]
Alternator
An electrical generator that converts mechanical energy to electrical energy in the form of alternating current[14]
American Locomotive Company (ALCO)
The second largest builder of steam locomotives in the United States[15][16]
The American wheel arrangement
American type
A steam locomotive with a 4-4-0 wheel arrangement[17]
A cupola-style caboose with an angel seat above
Angel seat (US)
The second level seats on a cupola-style caboose[18][19]
Angle cock
A valve affixed to each end of a piece of rolling stock that, when opened, admits compressed air to the brake pipe (or vents it to the atmosphere if air hose is detached)[20]
Annett's key (UK) or Annett key (AU)
A large key which locks levers or other items of signalling apparatus, thereby serving as a portable form of interlocking[citation needed]
Arch tubes
Tubes connected to the water-space of the boiler provided in and across the firebox in order to add extra high-temperature heating surface. They also serve to support the brick arch or equivalent.[citation needed]
Articulated locomotive
A steam locomotive with one or more engine units that can move relative to the main frame[15][21]
Articulation
The sharing of one truck by adjacent ends of two rail vehicles
Ashpan
A feature of a locomotive which has the some form and purpose as the domestic variety (i.e. to collect the ashes which fall through the bars of the grate). The only significant difference is the size, measured in feet rather than inches.
Aspect (UK)
The indication displayed by a colour-light signal (e.g. a yellow aspect)
Asynchronous
An alternating current electric motor whose speed varies with load and has no fixed relation to the frequency of the supply
The Atlantic wheel arrangement
Atlantic type
A steam locomotive with a 4-4-2 wheel arrangement[22][23][24]
An Autocoach
Autocoach (UK)
A passenger coach fitted with a driving cab and controls for use in an Autotrain
Automatic block signaling (ABS)
A system that consists of a series of signals that divide a railway line into a series of blocks and then functions to control the movement of trains between them through automatic signals
An automatic equipment identification tag attached to a freight car
Automatic equipment identification (AEI) (US)
An automatic tracking system using RFID technology[15][25]
Automatic train control (ATC)
A general class of train protection systems for railways that involves a speed control mechanism in response to external inputs
Automatic train operation (ATO)
An operational safety enhancement device used to help automate operations of trains
Automatic train protection (ATP)
Either of two implementations of a train protection system installed in some trains in order to help prevent collisions through a driver's failure to observe a signal or speed restriction
Automatic Warning System (AWS) (UK)
Refers to the specific form of limited cab signalling introduced in 1948 in the United Kingdom to help train drivers observe and obey warning signals
A consist of Autorack cars
Autorack or auto carrier (US), car transporter wagon or car transporter van (UK)
A specialized freight car for transporting automobiles[15][26]
Autotrain, push-pull train, or motor train (UK)
A branch line train consisting of a steam locomotive and passenger carriages that can be driven from either end by means of rodding to the regulator and an additional vacuum brake valve. The fireman remains with the locomotive and, when the driver is at the other end, the fireman controls the cut off and vacuum ejectors in addition to his usual duties.
Auto Train (US)
A passenger train service first operated by Auto-Train Corporation and then by Amtrak between Lorton, Virginia and Sanford, Florida that carries the passengers' automobiles aboard the same train in autoracks
A German axle box
Axlebox or axle box
1. The housing that holds the axle bearings of a locomotive[27]
2. The housing attaching the end of the axle to the bogie which contains the bearing allowing the axle to rotate.[28] See also journal box below.

B[edit]

B unit (US)
A cabless booster locomotive, controlled via MU from a cab-equipped A unit, sometimes equipped with limited controls for hostling[29][30][31]
An example of a BNSF Railway bad order repair tag
Bad order
A tag or note applied to a defective piece of equipment. Generally, equipment tagged as bad order is not to be used until repairs are performed and the equipment is inspected and approved for use.[32][33]
Bail off
To release the locomotive brakes while the train brakes are being applied in order to permit smoother handling and prevent excessive slack, wheel slide and flat wheels[34]
Balancing
The reciprocation and revolving masses of any steam, diesel or electric locomotive need balancing, if it is to work smoothly. Revolving masses can easily be balanced by counterweights, but the balancing of reciprocating parts is a matter of compromise and judgement.
Baldwin Locomotive Works
An American locomotive manufacturer in business from 1825 to 1972[32][35]
Ballast
Aggregate stone, gravel, or cinders forming the track bed on which sleepers (ties) and track are laid to ensure stability and proper drainage[32][36]
Ballast tamper
See Tamping machine.
Balloon
A looped length of track, usually at the end of a spur or branch, which allows trains to turn around for the return trip without reversing or shunting. Can be used as part of a freight installation to allow the loading or unloading of bulk materials without the need to stop the train (see merry-go-round train (MGR)).
Base plate (UK) or tie plate (US)
An iron or steel plate used to spread the weight of rail over a larger area of sleeper (tie) and facilitate a secure, low maintenance, fastening with bolts or clips. It derives from the former rail chairs.
Bay platform
A platform and track arrangement where the train pulls into a siding, or dead-end, when serving the platform
Beep
A one-of-a-kind switcher locomotive (also referred to as the SWBLW) built by the Atchison, Topeka and Santa Fe Railway in 1970
Bellmouth
A widening of an underground rail tunnel, in preparation for future connection or expansion of service. Used particularly in subway nomenclature.[37]
The Berkshire wheel arrangement
Berkshire type
A steam locomotive with a 2-8-4 wheel arrangement[38][39][40]
Blastpipe
A part of a steam locomotive that discharges exhaust steam from the cylinders into the smokebox beneath the chimney in order to increase the draught through the fire
Bo-Bo (Europe)
A locomotive with a four-wheel per truck configuration, each individually powered, as opposed to a six-wheel "Co-Co" configuration.
Bettendorf-type freight car bogie
Bogie (chiefly UK)
The undercarriage assembly incorporating the train wheels, suspension, brakes and, in powered units, the traction motors. Generally called a truck in the US.
Boiler
A cylindrical container adjacent to the firebox in which steam is produced to drive a steam locomotive[41]
Bolster
A transverse floating beam member of truck suspension system supporting the weight of vehicle body[42]
Boom barriers at a railway crossing in France
Boom barrier
A barrier at a level crossings
Booster engine
An extra set of cylinders that can be engaged on a steam locomotive to drive a trailing truck or tender truck to give additional tractive effort at starting and low speeds[32][43]
A boxcar
Boxcar (US, Canada), covered goods wagon (UIC), or van (UK)
A type of rolling stock with a flat bottom enclosed on all sides and top, which is loaded and unloaded from sliding doors on each side[32][44]
Brakeman (US)
A train crew member who performs railcar and track management; often a single job description along with switchman ("brakeman/switchman"). A brakeman manually activated brakes on railroad cars before the advent of air brakes.
Brakeman's cabin, brakeman's cab, or brakeman's caboose (US)
A small hut at one end of a railway wagon to protect the brakeman from the elements
Brake pipe
The main air pipe of a train's air brake system[45]
Brake van (UK)
A heavy vehicle with powerful brakes which was attached to the rear of goods trains in the days when most wagons were not fitted with a continuous braking system. Its function was to supplement the locomotive's braking power in slowing and stopping the train and to keep the couplings uniformly tight by selective light braking to avoid snatching and breakages. It also conveyed the train guard, hence its alternative name of "guards van". Partly analogous to caboose and its synonyms.
Branch line
A secondary railway line that splits off from a main line[32]
Brick arch
A brick or concrete baffle provided at the front of a locomotive firebox below the tubes, in order to extend the flame path. Early Locomotives burnt coke; provision of a brick arch was necessary before coal could be used without producing excessive smoke.
British Rail Universal Trolley Equipment (BRUTE)
A type of platform trolley found on stations all over the UK rail network from the late 1960s to the early 1980s
Broad gauge
Track where the rails are spaced more widely apart than 1,435 mm (4 ft 8 12 in) (which is called standard gauge).[32] Many early railroads were broad gauge, for example the Great Western Railway in the UK which adopted 7 ft (2,134 mm) gauge until it was converted to standard gauge in the 1860s - 1890s. Russia still has over 80,000 km (50,000 mi) of broad gauge (1,520 mm (4 ft 11 2732 in)) railroads. Broad gauge is also normal in Spain and Portugal (1,668 mm (5 ft 5 2132 in) Iberian gauge), in India (1,676 mm (5 ft 6 in) Indian gauge), as well as Ireland and used in some parts of Australia (1,600 mm (5 ft 3 in) Irish gauge).
Bubble car
A British Rail Class 121 railcar[46]
Buckeye coupler
A side operated version of the top or bottom operated Janney coupler[47]
Buffer
A device that cushions the impact of rail vehicles against each other
Buffer stop or bumper post
The barrier installed at the end of a dead end track to prevent rail vehicles from proceeding further
Builder's plate
The nameplate on locomotives and rolling stock
Bulkhead flatcar
An open-top flatcar with a wall at each end
Bull head rail (UK)
A steel rail section commonly used in 60 ft lengths on almost all railway lines throughout Britain until c1950, which due to its shape must be supported in cast iron chairs that are screwed to the sleepers. It is still found on some London Underground lines, on secondary and preserved lines and in yards. The rail has two heads (shaped somewhat like a vertical dumbbell) which led some people to assume that when one side became worn, the rail could be inverted and reinstalled for further service rather than being replaced (it can't, because the two heads are different sizes, and by the time the top became worn down sufficiently to fit in the chairs when the rail is inverted, both the top and the bottom of the rail would be too small for further use).
Bungalow
The housing for signals & communications computers that control switches, crossings, and other such controls, relaying information to and from the RTC (rail traffic control)[48]
Bustitution
The practice of replacing train service, whether light rail, tram/streetcar systems, or full-size railway systems, with a bus service, either on a temporary or permanent basis. Somewhat derogatory and mainly used in the UK, Canada, USA, and Australia. The word is a portmanteau of the words "bus" and "substitution".

C[edit]

Cab
The control room of a locomotive housing the engine crew and their control consoles[49][50]
Cab forward
A steam locomotive with its cab at the leading end of the boiler, rather than the usual trailing end adjacent to the tender. The best known example is the Southern Pacific Railroad's AC type, built to handle drag freights through the SP's many tunnels and snow sheds without the danger of the exhaust asphyxiating the engine crew.
Cabless
A locomotive without a cab. Commonly referred to as a B unit or a Slug, although not all Slugs are cabless.
Caboose
A railroad car attached usually to the end of a train, in which railroad workers could ride and monitor track and rolling stock conditions. Partly analogous to brake van (UK). Largely obsolete, having been replaced by the electronic End of Train (EOT) device, or Flashing Rear End Device called "FRED".[51]
Cant
Superelevation angle. Can be used in the context of the cant of the track (the relative level one rail to another, e.g. on curves) (UK); and the cant of a rail, being the angle of an individual rail relative to vertical.
Cape (UK)
A British Railways telegraphic codeword to note the cancellation of a passenger train service[52]
Carbody unit or cab unit (US)
A locomotive which derives its structural strength from a bridge-truss design framework in the sides and roof, which cover the full width of the locomotive
A catenary is visible above this electric Amtrak train.
Catenary
The overhead wire system used to send electricity to an electric locomotive or multiple unit, tram or light rail vehicle[51]
Centerbeam
A bulkhead flatcar with a braced beam bisecting its length, used to transport lumber products
Centralized traffic control (CTC) (US, AU)
A system in which signals and switches for a given area of track are controlled from a centralized location[51]
A cess along the London Underground
Cess (UK)
The area either side of the railway immediately off the ballast shoulder which provides a safe area for workers to stand when trains approach[53]
Chair (UK)
A cast iron bracket screwed to the sleeper and used to support bull head rail that is held in place by a wooden key (wedge) or spring steel clip—still found on preserved railways and in yards
The Challenger wheel arrangement
Challenger type
A steam locomotive with a 4-6-6-4 wheel arrangement[54][55][56][57]
Ches-C (US)
Chessie System's kitten logo[58][59]
Chimney (UK)
A smokestack, also known as a stack or funnel
Co-Co (EU)
A heavier duty locomotive with six wheels per bogie (all axles being separately driven) configuration as opposed to a four-wheel "Bo-Bo" configuration. The correct classification is Co'Co', but Co-Co is used more often.
Coal pusher
A steam-operated device in the tender intended to push coal forward to a point where it can be shovelled directly into the fire[60]
Colour light signal
A signal in which the colour of the light determines the meaning of the aspect shown
Colour position signal
A signaling system that uses both colour and light position to determine the meaning of the aspect shown
Combined power handle
A handle or lever which controls both the throttle and the dynamic braking on the locomotive: on a desktop-type control stand, forward (away from operator) past center operates the dynamic brake, backward (toward operator), past center, is throttle up[61][62][63]
Composite (UK)
A passenger car with more than one class of accommodation provided (e.g. first and third). In earlier days of three-class travel, first and second class, and second and third class composites were also built. A car with first, second, and third classes was also known as a tri-composite.
Compound locomotive
A steam locomotive passing steam through two sets of cylinders. One set uses high pressure steam, then passes the low pressure exhausted steam to the second.[64]
Conductor (US) or guard (UK)
The person in charge of a train and its crew. On passenger trains, a conductor is also responsible for tasks such as assisting passengers and collecting tickets. In Australia, both terms are used, "conductor" for the person checking tickets, etc. on a tram or train, and "guard" for the person in charge of the train.
Consist (US) or formation (UK)
The group of rail vehicles making up a train, or more commonly a group of locomotives connected together for multiple-unit (MU) operation[51]
The Consolidation wheel arrangement
Consolidation type
A steam locomotive with a 2-8-0 wheel arrangement[65][66]
Container on flat car (COFC)
The loading of a shipping container onto a simple flat car[51]
Continuous welded rail (CWR)
A form of track in which the rails are welded together by utilising the thermite reaction or flash butt welding to form one continuous rail that may be several kilometres long[51]
Control car or cab car
A passenger coach which has a full set of train controls at one end, allowing for the use of push-pull train operation
Control point (CP) (US)
An interlocking, or the location of a track signal or other marker with which dispatchers can specify when controlling trains[51]
Cornfield meet (US)
A head-on collision between two trains[67][68][69]
Coupler (US) or coupling(UK)
Railroad cars in a train are connected by couplers located at the ends of the cars[51]
Coupler pulling faces, length over
Effective length of piece of rolling stock
Coupling rods
Rods between crank pins on the wheels, transferring power from a driving axle to a driven axle of a locomotive[70]
Cow-calf or cow and calf
A diesel locomotive with a crew cab permanently coupled to and acting as a controller for a similar slave diesel locomotive without a crew cab, primarily used for switching/shunting duties for large groups of rolling stock. Also known as master and slave, as in the British Rail Class 13 shunters at Tinsley Marshalling Yard.
An Amtrak EMD F40PH is one of many Cowl units
Cowl unit (US)
A locomotive for which structural strength comes from the underframe instead of the sides and roof
Crank pin
A pin protruding from a wheel into a main or coupling rod
Crosshead
The pivot between the piston rod and the main rod on a steam locomotive[71]
Cross-tie (U.S) sleeper (UK)
See Railroad tie.
Cut lever
A manual lever which releases the pin of an automatic coupler when pulled to separate cars or locomotives[72][73]
Cut off
A variable device on steam locomotives which closes the steam valve to the steam cylinder before the end of the piston stroke, thus conserving steam while allowing the steam in the cylinder to expand under its own energy. See also: Reverser handle.
Cutting
A channel dug through a hillside to enable rail track to maintain a shallow gradient. See also embankment.
Cycle braking
Making repeated service brake reductions in short succession to maintain a constant speed on short but steep grades. Each reduction must be at least 5 PSI lower than the previous one in order to keep the brakes applying regularly, but excessive cycle braking can deplete the air supply and require an emergency application.[74]
Cylinder
A cavity in a reciprocating engine in which a piston travels
Cylinder cock
On steam locomotives, this appurtenance allows condensed water to be drained from the steam cylinders when the throttle is opened, thus preventing damage to the pistons, running gear, and cylinder heads[75]

D[edit]

Dark signal
A block signal that is displaying no discernible aspect, often due to burned out lamps or local power failure. Most railroads require that a dark signal be treated as displaying its most restrictive aspect (e.g. stop and stay for an absolute signal).[76]
Dark territory
A section of track without block signals[77]
Dead man's handle
A safety mechanism on a train controller which automatically applies the brake if a lever is released. It is intended to stop a train if the driver is incapacitated. In some forms, this device may be pedal-actuated.
Deadheading (US)
1. A nonrevenue (i.e. nonpaying) passenger
2. The nonrevenue movement of locomotives or cars
The Decapod wheel arrangement
Decapod type
A steam locomotive with a 2-10-0 wheel arrangement[78][79][80]
Defect detector
A track side device used to detect various defects such as hotboxes (overheated axle bearings), dragging equipment, leaning cars, overloaded cars, overheight cars, seized (locked) wheels, etc.[81]
Demurrage
A monetary charge levied by a railroad to a customer for excessive delay in loading or unloading cars
Derail or derailer
A safety device that will derail vehicles passing it, often used to prevent rolling stock from unintentionally fouling the mainline[81]
A detonator on a rail
Detonator or track torpedoes (US)
Small explosive charges placed on the running rail which detonate when run over—used to warn drivers in following trains of an incident ahead
A railroad crossing at grade, also known as a diamond
Diamond
Track which allows a rail line to cross another at grade[81]
Diesel multiple unit (DMU)
A set of diesel-powered self-propelling passenger rail vehicles able to operate in multiple with other such sets. Such units, especially those consisting of a single vehicle, are sometimes termed railcars.
Direct traffic control (DTC)
A system in which train dispatchers communicate directly with train crews via radio to authorize track occupancy in predefined blocks[81]
Distributed power
A practice employed to move large trains through the mountains. Consists of the locomotives on the head end, a "swing" (mid-train) helper or two, and pusher locomotive(s) on the rear; today, all units are remotely controlled by the engineer in the lead unit. The power distribution alleviates stress on the couplers and relieves the lead units of the full weight of the train, making it easier to move on grades.
A Canadian National Railway train showing the placement of ditch lights on the locomotive
Ditch lights
A pair of lights, usually found on modern locomotives, located several feet below and outboard of the main headlight, that may alternately flash when the train is sounding its horn[82]
Dog or dogspike (AUS and India)
A spike with a slightly altered head shape for easier extraction when the spike has become too loose in the sleeper[83][84]
Doodlebug
A self-powered gasoline-electric passenger car used for small capacity rural commuter service.[81] Also a British Rail Class 153 DMU.
Double
If a train has insufficient power to climb a grade and no helpers are available, the train will be split into two sections and run separately to the top.[85]
Doubleheading or doubleheader (US)
A configuration in which two steam locomotives are coupled head-to-tail in order to haul a heavy train up a long or steep hill. In the present day, doubleheaders (and occasionally tripleheaders) are done primarily on large passenger trains or as a show for railfans.
Down (UK)
A direction (usually away from London, other capital city, or the headquarters of the railway concerned) or side (on left-running railways, the left side when facing in the down direction).[86][87] The opposite of up. The down direction is usually associated with odd-numbered trains and signals. In Australia it is used relative to the state's capital city. US railways use the compass points northbound, southbound, eastbound and westbound.[citation needed]
Drag
A long, heavy freight train moving at low speed
Dragging equipment detector
See Defect detector.[81]
Drawbar
The part of a coupler that attaches to the frame of the car or locomotive; may be equipped with a pneumatic cushion depending on a freight car's design cargo (e.g. an autorack). Alternately, the pinned double bars coupling a steam locomotive to its tender.
Driver (UK) or engineer (US)
The operator of a railway locomotive
Driver only operation (DO or DOO)
Operation of a train by the engineer or driver only.[88] Also known as one person train operation (OPTO)
Driver
A wheel in contact with the rail that also propels a locomotive
Driving Van Trailer or DVT (UK)
A class of control cars used in the UK. (See also: DBSO - predecessor to the DVT)
Dwarf signal
A signal light that is considerably smaller and closer to the ground than a high-mast signal; often absolute, and placed within interlocking limits, its aspects tend to differ from those conveyed by a taller signal for certain indications. Also called 'pot' or 'jack'.
Dynamic braking
The use of a diesel locomotive's electrical output to maintain or retard train speed on a descending grade, without relying solely on the air brakes

E[edit]

Ejector
1. A component of vacuum brake system. Steam passing through a cone sucks air from the train pipe to create the vacuum. Usually fitted in pairs.
2. A small ejector running continuously to overcome leaks and to restore the vacuum after light braking and a large ejector operated when needed to release the brakes quickly after a heavy application or to create the initial vacuum ("making a brake" – UK) after coupling up.
Electric multiple unit (EMU)
A set of electrically powered self-propelling passenger rail vehicles able to operate in multiple with other such sets
Electro-Motive Diesel (EMD)
The world's second largest builder of railroad locomotives. EMD was previously Electro-Motive Division of General Motors before being sold.
Elevated railway, "the el", or simply "The L"
A railway built on supports over city streets
Embankment
A raised pathway on which rail tracks are placed to maintain a shallow gradient when passing over depressions in the terrain. See also cutting.
Empty coaching stock (ECS)
A train used to bring carriages into (or out of) service. They usually run between sidings and main stations, with the carriages then forming a service train to another destination. They are often worked under freight train rules (e.g. without needing a guard in the UK).[89]
End-cab switcher
A switching locomotive with no short hood, thus having its cab forming one end of its carbody
Engineer (US), driver, engine driver, train driver (UK)
The operator of a locomotive[90]
EOT (US)
End of train device. A form of an electronic caboose also called FRED.[90]
Equalizing reservoir
A small air reservoir in a locomotive control stand. When the automatic brake valve is operated, this reservoir responds by reducing or increasing the air pressure in the brake pipe.[91]
Event recorder
A device that continuously captures analog and digital train systems information and stores that data for a minimum of 48 hours. This data is used to evaluate incidents and accidents. Typical stored data includes speed, brake pressure, dynamic brake, horn activation, track signal, etc. In the U.S., event recorders are mandated by the Federal Railroad Administration (FRA) for freight, passenger and commuter rail. Regulations for railroad outside the U.S. vary by country. Transit operations are not generally required to have event recorders, but have begun to add them voluntarily.
Express train
A train that passes selected stations without stopping
Extra
A train not included in the normal schedule of a railroad[92][93][94] They often run during busy holiday travel periods in order to handle larger crowds and reduce the number of passengers that are forced to stand or are stranded at a station. In train order territory, extras are required to clear the main line for scheduled trains to pass.[95]

F[edit]

Facing
A turnout that can select which way to diverge a train—the opposite of trailing
Fairlie
A type of articulated locomotive, typically (but not exclusively) with two boilers and connected fireboxes in a central cab
Fall plate
A heavy, hinged steel plate attached in a horizontal position to the rear of the locomotive footplate or front of a locomotive tender. When the tender is attached to its locomotive the plate is allowed to fall to cover the gap in the "floor" between the two units. The sliding edge is not fixed and has a smooth chamfer so as to avoid a trip hazard.[96]
Fallen flag (US)
A railroad which is defunct, having either merged or discontinued operations[97]
Federal Railroad Administration (FRA) (US)
The agency which oversees rail operation regulations and safety requirements for U.S. freight, passenger and commuter rail operations[98]
Feedwater heater
A device to preheat the water for a steam locomotive to improve efficiency
Feed valve or regulating valve
A valve which controls the amount of air pressure being channelled from the locomotive's main reservoir to the brake pipe, in accordance with the set pressure in the equalizing reservoir[99]
Fiddle yard
A concealed group of sidings used in model railways to provide more realistic operation in limited space
Firebox
In steam railroading, a chamber in which a fire would produce sufficient heat to create steam once the hot gases from the firebox were carried into the adjacent boiler via tubes or flues[100]
Fireman, stoker, or boilerman
A worker whose primary job is to shovel coal into the firebox and ensure that the boiler maintains sufficient steam pressure
Fishplate (UK) or joint bar (US)
A metal plate that joins the ends of rails in jointed track
Flat
A wheel defect where the tread of a wheel has a flat spot and is no longer round; flats can be heard as regular clicking or banging noises when the wheel passes by. This is caused either by a locked bearing, or a brake that was not fully released before the car was moved, dragging the wheel without turning.[98]
A train of loaded flatcars
Flatcar (US) or flat wagon (UIC, UK)
A type of rolling stock, which can be a flat-bottomed car with no sides on which freight (including intermodal containers) can be stacked. A bulkhead is a flatcar with walls on the front and rear. A center-beam bulkhead is a bulkhead flatcar with an additional wall dividing one side of the flatcar from the other, but still without any sides.[98]
Flying junction or flyover
A railway junction that has a track configuration in which merging or crossing railroad lines provide track connections with each other without requiring trains to cross over in front of opposing traffic[98]
Flying switch (US) or fly shunting (UK)
The practice of uncoupling a locomotive from a car in motion and running over a switch, whereupon an employee on the ground lines the switch to divert the car onto an adjacent track.[101][102] Once commonplace, this practice has led to several lawsuits against railroad companies and is now strictly prohibited due to the high risk to life and property.[103][104][105][106][107]
Fouling point
The point of a switch turnout where a car or locomotive on one track will obstruct movement on the adjacent track[108]
Four-foot
The area between the running rails of a standard gauge track. The actual distance between the rails is 4 ft 8 12 in (1,435 mm). See also six-foot and ten-foot.[109]
Four-quadrant gate
A type of Boom barrier. See above.
Flashing rear-end device (FRED) (US)
A small marking device with a flashing red light mounted on the end of the train. FRED also monitors various train functions such as brake pipe pressure, motion and GPS location. A form of an electronic caboose. Also called an EOT (end of train) device.[98][110]
Free-mo
A type of modular layout in model railroading
Freight (US) or goods (UK)
The products which are carried
Frog (US)
A casting with "X" shaped grooves used in switches and crossovers[98]
Full service reduction
The maximum air pressure that can be exerted against brake pistons in a normal brake application. To increase pressure beyond this point, the brakes must be placed in emergency.[111]
A brakeman uses a fusee to demonstrate a hand signal indicating "stop"
Fusee
A pyrotechnic device similar to an automotive flare that is used for signalling[98]
Fusible plug
A threaded plug, with a soft metal core, that is screwed into the crown plate of a firebox. If the water level gets too low the core melts and the noise of the escaping steam warns the enginemen.

G[edit]

Gandy dancer (US)
A track maintenance worker[112]
A diagram of a Garratt locomotive
Garratt
A type of steam locomotive that is articulated into three parts[citation needed]
Gauge
The width between the inner faces of the rails
An EMD GP38-2, "General Purpose" (GP) locomotives are often called a "Geep"
Geep
Any of the GP ("general-purpose") series of Electro-Motive four-axle diesel locomotives; originally applied only to EMD GP7, GP9, and GP18 models[112]
Generator field
The control switch of a diesel-electric locomotive that opens or closes the circuit between the main generator and the traction motors[113]
GEVO
A nickname for General Electric's Evolution series of modern diesel locomotives[114][115]
Gladhand connector
A quick coupling and uncoupling connector at the end of a trainline air hose that resembles a pair of shaking hands when hoses are connected
Go-devil
A hand-powered railroad car (see Handcar and Draisine), or a small gasoline powered railroad car[116][117]
A gondola car
Gondola (US) or open wagon (UIC, UK)
A type of rolling stock with a flat bottom and relatively low sides, used to haul material such as ore or scrap, and loaded and unloaded from the top which may be covered or uncovered[112]
Goods wagon, freight wagon (UIC), goods van, goods truck (UK), freight car, or box car (US, Canada)
A flat car with sides and a top, usually with a large sliding door in the middle of each side
Grab bar or grab iron
A handle on the side of a car to allow switching personnel to hold on[118]
Green
A colour associated with go or proceed
Guard (UK)
See Conductor.
Gricer (UK)
A railway enthusiast[119][120]
Guard rail (US) or check rail (UK)
A double rail section of track, sometimes found in train yards and on bridges to prevent derailments or limit damage caused by derailments, by having rail on both sides of the wheel flange. Also found on curves with a tight radius and switches and crossings[112]
Gunzel (AU)
Railway enthusiast. In Melbourne, Victoria it often refers to tramway enthusiasts.

H[edit]

A handcar or pump trolley
Handcar (US) or pump trolley (UK)
A small, hand-powered railroad car used for track inspection
Harmonic rock or harmonic rock and roll
The condition of locomotives and cars swaying in opposite directions when traversing depressions on the roadbed. A potentially dangerous condition that can cause coupler damage, lading damage, or derailments at slower speeds.[121][122]
Head end power (HEP)
A scheme whereby the locomotive engine or a separate generator provides hotel power to carriages[123]
Headboard
A sign attached to a locomotive to identify a named train or charter, or for other special occasions[124]
Headshunt (UK) or shunting neck (US)
A length of track feeding a number of sidings that permits the sidings to be shunted without blocking the main line, or where two lines merge into one before ending with a buffer, to allow a run-round procedure to take place[125]
Headstock
A transverse structural member located at the extreme end of a rail vehicle's underframe. The headstock supports the coupling at that end of the vehicle, and may also support buffers, in which case it may also be known as a "buffer beam".[126]
Heavy haul
Heavy freight operations[127][128][129]
Heavy rail (US)
A city-based transit rail system that runs on its own dedicated track and often underground. Subways are considered heavy rail. Refers to commuter rail and inter-city rail when used by the FRA or in other countries.[130][131]
Heavyweight (US)
During the period between about 1910 and the mid nineteen thirties, most passenger cars in the US were built with three axle trucks, concrete floors, and riveted, double walled sides and often weighed 90 - 100 tons or more. Heavyweight construction was used to improve ride quality.[123][132]
Highball (US)
1. The conductor's signal for a train to depart[133][134][135]
2. To move at speed over the main track on a clear signal indication. Originated with the now-obsolete ball signal system, in which a ball hoisted all the way to the top of its post indicated to a train crew that the track ahead was clear.[123]
High cube (US)
A boxcar whose vertical clearance is excessive.[136][137] See Plate.
High rail
The upper rail in a curve or superelevation which typically experiences the higher lateral loads and greater wear
Hogger (US)
A locomotive engineer[123][138][139]
Hole
A passing siding. Inferior trains "lay over in the hole" to let superior ones pass.[140]
Home signal
See absolute signal.
TPW 400, an ALCO RS-11, a type of hood unit
Hood unit (US)
A locomotive whose sides and roof are nonstructural and do not extend the full width of the locomotive. Structural strength comes from the underframe.[123]
Horn blocks
Plates lining the axlebox cut-outs in a locomotive frame to allow smooth vertical movement under control of the springs[141][142]
Hostling
The action of shuttling a locomotive from the yard to the engine house or vise versa[143]
Hotbox
An axle bearing that has become excessively hot due to friction[123][144][145]
Hotbox detector
A device attached to the track which monitors passing trains for hot axles, and then reports the results via a radio transmission (typical in the US) or a circuit to the signal box (typical in the UK). See defect detector.[123]
Hotel power (US)
Electric power used to provide for the comfort of passengers aboard a train en route.[146] See HEP above.
Hot rail (US)
1. Any section of track over which a train movement is imminent. The closer or faster the approaching train, the "hotter" the rail.[147]
2. On some electrified railroads and rapid transit lines, the third rail which supplies power to locomotives or cars[148][149][150]
Hotshot (US)
A fast, long-distance train given priority on the track over other trains[151][152][153]
The Hudson wheel arrangement
Hudson type
A steam locomotive with a 4-6-4 wheel arrangement[154][155]
Hump
A raised section in a rail sorting yard that allows operators to use gravity to move freight railcars into the proper position within the yard when making up trains of cars. This is faster and requires less effort than moving cars with a switching engine.[123]
Hunting
Swaying motion of a railway vehicle or bogie caused by the coning action on which the directional stability of an adhesion railway depends. The truck or bogie wanders from side to side between the rails, "hunting" for the optimum location based on the forces at play.[123]

I[edit]

Independent brake (or locomotive brake in layman's terms)
The braking system that applies or releases the brakes of a locomotive independently from its train[156][157]
Infill station (sometimes in-fill station)
A train station built on an existing passenger line to address demand in a location between existing stations
Injector
A device to force water into a steam locomotive's boiler by steam pressure[158]
Insulated rail joint (IRJ) or insulated block joint (IBJ)
Rail joints incorporating insulation to isolate individual track circuits[159][160]
Interchange
Any track or yard where rail cars are transferred from one carrier to another[161][162]
The interlocking tower and tracks at Des Plaines, Illinois
Interlocking (US)
Any location that includes a switch or crossing of two tracks, derived from the early practice of installation of a system of mechanical equipment called an interlocking plant to prevent collisions. See also signal box. Interlocking is also the term for the actual mechanical or electrical apparatus that prevents switch/points and signals from being operated in ways that would allow for conflicting train movements.[158]
Intermodal ship-to-rail transfer of containerized cargos at APM Terminals in Portsmouth, VA
Intermodal freight
Moving goods by more than one type of vehicle. Intermodal freight can be transported using shipping containers which can easily be transferred among railroad flatcars, ships, airplanes, and tractor-trailer trucks.[158]
Intermodal passenger
Moving people by more than one type of vehicle[158]
Island platform
A railway platform that has tracks along the full lengths of both sides

J[edit]

Jerk a lung (North America) or get a knuckle
To break a train in two, usually by shearing the knuckle pin in a coupler, often caused by the application of excessive head end power at startup[163][164]
Johnson Bar (locomotive) (US)
On a locomotive, a long, heavy lever that operates the reversing gear[165]
Joint bar, fishplate (UK), rail joiner, or angle bar (North America)
Joins the ends of rails in jointed track[166]
Jointed track
Track in which the rails are laid in lengths of around 20 m and bolted to each other end-to-end by means of fishplates or joint bars[165]
Journal bearing
A bearing without rolling-elements; a plain bearing[167]
A journal box complete with bearing and journal
Journal box
The housing, or box, of a journal bearing[167][168]
The Jubilee wheel arrangement
Jubilee type
A steam locomotive with a 4-4-4 wheel arrangement[169]
Junction
A point at which two lines or separate routes diverge from each other[165]

K[edit]

Keeper
A padlock or hook securing the lever of a hand-operated switch, thereby preventing the switch points from moving as rolling stock passes over them[170][171]
Key (UK)
Timber or sprung steel block used to secure Bullhead rail into the chairs[172]
Kick
To shove a car a short distance and uncouple it in motion, allowing it to roll free under gravity and/or its own inertia onto a track. Commonly practiced in bowl or hump yards to make up or break down trains or classify large numbers of cars in an expedient fashion. Differs from a flying switch in that the locomotive is pushing the car rather than pulling it when the cut is made.[173]
Kicker
A freight car with a defect in its brake valve that causes the entire train's brake system to go into emergency when any application is made[174]
Kinematic envelope (KE)
The outline of the space beside and above the track that must be kept clear of obstructions for the train to pass. This can be larger than the static clearance around an unmoving engine or car.[175] See also: loading gauge and structure gauge
Knock down (US)
To pass an absolute signal and thereby change its aspect to stop; originated in the days of semaphore signals whose arms would drop to the stop aspect when passed[176]
Knuckle
The articulating part of a coupler that locks automatically in its closed position to join rail cars; so named because its movement resembles that of the human finger[177]

L[edit]

A brakeman's lantern from the Chicago and North Western Railway which burned kerosene to produce light
Lantern (US) or lamp (UK/AU)
A portable (often handheld) light source that is used to signal train crews[178]
Lead track
A non-main track from which several others branch within a short distance, such as within a rail yard or engine terminal[179]
Level crossing, railroad crossing, railway crossing, train crossing, or grade crossing
A crossing on one level ("at-grade intersection")—without recourse to a bridge or tunnel—generally of a railway line by a road or path. The term is sometimes used for a crossing by (not a junction with) another rail track (known as a flat crossing in the UK).
Level junction (US) or flat junction (UK)
A junction in which all track crossings take place at grade and routings must therefore be controlled by signals and interlocking
Light engine
A locomotive travelling on its own, or perhaps with just a caboose (brake van) attached[180]
Light rail
A city-based rail system based on tram design standards that operates mostly in private rights-of-way separated from other traffic but sometimes, if necessary, mixed with other traffic in city streets.[181] Light rail vehicles (LRV) generally have a top speed of around 55 mph (89 km/h) though mostly operating at much lower speeds, more akin to road vehicles. Light rail vehicles usually run on trackage that weighs less per foot (due to a smaller track profile) than the tracks used for main-line freight trains; thus they are "light rail" due to the smaller rails usually used.[180]
Link and pin
An obsolete method of coupling rail cars, consisting of manually dropping the coupling pin into the drawbar as the cars joined. Extremely hazardous to the brakemen of its day, it was outlawed by the Railroad Safety Appliance Act of 1893.
Local train
A train that stops at most, if not all, stations along its route.[182] Often referred to in North America as a "milk train" or "milk run" (usage from the days when trains stopped at every station and stop along their route to pick up fresh milk brought to the stations daily from local dairy farms).[183][184][185]
Location case (UK)
A trackside cabinet used to house signalling equipment such as relays or transformers[186][187]
Loop (UK), siding (US)
Used on single-track railway lines, a loop is a second parallel track (running for a short distance), allowing two trains to pass by one another
Lunar
An off-white color of railway signal light, like the Moon, achieved by the use of a clear lens of very light blue, to make it distinct from a light that has a broken lens.[188][189] In UK practice, it is the color used for the type of junction indicator known as a feather, so-called for its resemblance to a popular inn sign.[citation needed]

M[edit]

Main generator
The electric generator in a diesel-electric locomotive that is coupled directly to the prime mover and feeds electrical energy to the traction motors[190]
Mainline (US) or main line (UK)
A principal artery of a railway system[191]
Main reservoir
The compressed-air tank of a locomotive containing source air for the brakes and other pneumatic appliances[192]
Main rod (US) or connecting rod (UK)
The drive rod connecting the crosshead to a driving-wheel or axle in a steam locomotive[70]
A spiker is an example of maintenance-of-way equipment
Maintenance of way (MOW) (US)
The maintenance of railroad rights of way, including track[191]
Mallet (pronounced "mallay")
A type of articulated locomotive designed by Anatole Mallet.[191][193] See Compound engine.
Manifest
An express freight train carrying a variety of general merchandise[194][195]
Mechanical semaphore signal
A signal in which the aspect is conveyed by moving an arm[196][197]
Merry-go-round (MGR) train (UK)
Coal train running between a coal mine and a power station, loading and unloading without stopping or shunting
The Mikado wheel arrangement
Mikado type
A steam locomotive with a 2-8-2 wheel arrangement[198]
Milk train
A aggregator for transporting milk from farms to dairies, such as British Railways Milk Trains[185]
Montreal Locomotive Works (MLW)
A locomotive manufacturer that was bought by Bombardier and closed[191]
Modalohr
An inter-modal car
The Mogul wheel arrangement
Mogul type
A steam locomotive with a 2-6-0 wheel arrangement[199]
Motion (UK)
Collective term for the connecting rod, coupling rods, and valve gear; forms part of the running gear. Originally from Watt's invention of the parallel motion.[200]
Motor train (UK)
See Auto train.
The Mountain wheel arrangement
Mountain type
A steam locomotive with a 4-8-2 wheel arrangement[201]
Mud ring
The bottom of the water space surrounding a steam locomotive's firebox that collects solid deposits distilled from the water supply during the boiling process[202]
Multiple aspect signalling
A system of colour-light signalling in which signals may show three or four aspects[203]
Multiple unit (UK) or MU (US)
A self-propelled rail vehicle that can be joined with compatible others and controlled from a single driving station. The sub-classes of this type of vehicle; Diesel Multiple Unit (DMU), Diesel-Electric Multiple Unit (DEMU) and Electric Multiple Unit (EMU) are more common terms. These may also be termed railcars.
Multiple-unit train control (US) or multiple working (UK)
This normally refers to the ability of diesel and electric locomotives or multiple units to be joined together and controlled from one driving station. Such a set of joined locomotives is called a consist or (colloquially) "lash-up" and is said to be "MUed together".[191]
Multiple working (UK)
See Multiple unit.

N[edit]

Comparison between standard gauge (blue) and one common narrow gauge (red) rail spacing
Narrow gauge
Railroad track where the rails are spaced less than 1,435 mm (4 ft 8 12 in) apart.[204] There are many common gauges narrower than standard, amongst them 3 ft 6 in (1,067 mm) widely in Africa and Asia; 3 ft (914 mm), which was the most common narrow gauge in the U.S.; 2 ft 6 in (762 mm), used in various locations across Europe, Asia and elsewhwere, South America and Australia, and 2 ft (610 mm), which saw widespread use in the UK. Meter gauge 1,000 mm (3 ft 3 38 in) is also widely used in Asia and Africa. Narrow-gauge lines are often found in mountainous terrain where the cost savings of building a smaller railroad can be considerable. (Historically, the term "narrow gauge" was once used in Britain for what is now called standard gauge, as the only other gauge then in common use was the Great Western Railway's 7 ft (2,134 mm) broad gauge.)
NIMBY (US)
A derisive acronym for "not in my backyard" describing residents who are opposed to trains running through their neighbourhoods
The Northern wheel arrangement
Northern type
A steam locomotive with a 4-8-4 wheel arrangement, also known in North America as "Pocono", "Niagara", "Confederation", "Greenbrier", and "Potomac"[205][206]
Notch 8 or run 8
The eighth notch of the throttle control, indicating full power[207][208]

O[edit]

One-man operation (OMO) (US)
Operation of a train by the driver or motorman alone, without a conductor
An open wagon (or gondola, in the US) freight car
Open wagon (UIC, UK) or gondola (US)
A form of freight hauling car for bulk goods[209]
Out to foul
When equipment is placed ahead of the fouling point of a switch turnout
Overbridge (UK)
A bridge over the railway[210]
Overlap (UK)
A distance (normally 180 metres or set according to the permitted speed of the line) beyond a stop signal which must be clear before the preceding stop signal can display a proceed aspect; allows a margin in case a train overshoots a signal before stopping[211]

P[edit]

The Pacific wheel arrangement
Pacific type
A steam locomotive with a 4-6-2 wheel arrangement[212]
Pannier tank
A tank locomotive with the water tanks mounted on the boiler like panniers
A pantograph
Pantograph
An arm to pick up current from overhead lines[213][214]
Paper
Colloquially, a track warrant, train order or other movement permit that is dictated by a dispatcher and copied in writing by a train crew member[citation needed]
Pennsy
1. Abbreviation for the former Pennsylvania Railroad[215]
2. A nickname for the PRR's K-4 class steam locomotive[citation needed]
Per diem (pronounced by some U.S. railroaders per die-um, not per dee-um.)
1. A fee paid by a rail company to the owner of a car (or wagon) for the time it spends on the company's property[213][216]
2. An authorized living expense payment for some workers forced away from their home terminal[213][217]
Permissive signal
A block signal whose most restrictive indication is stop and proceed. A permissive signal is identified by the presence of a number plate affixed to the mast or supporting structure. Proceeding beyond a permissive signal at stop is allowed at restricted speed if operating conditions enable a train operator to stop before reaching any train or obstruction.[218][219][220]
Person in charge of possession (PICOP) (UK)
The railway or contractor's official responsible for safe working during engineer's possession[221]
Pilot
1. A deflective shield affixed to the front of a locomotive to protect its wheels from on-track debris; archaically called a "cowcatcher"[222] See also: Pilot (locomotive)
2. An employee qualified on the operating rules and physical characteristics of a certain section of the railroad, assisting a crew who is not so qualified[223][224] See also: Railroad engineer
Pilot engine
1. The leading locomotive during a double heading operation, attached in front of another train engine[225] also known as a helper (US)[226]
2. An unattached locomotive driven a specified distance in front of a special train[225][227][228]
Pilot man
Where it is necessary to temporarily work a section of line as single track (for instance if the other track of a double track line is out of use), a person (the pilot man) acts as the single track token.
Piston
The moving component in the cylinder of a steam engine or internal combustion engine that translates into motion the force exerted by pressurised steam or exploding fuel[229]
Piston travel
A specified distance that a brake piston may move from its cylinder to the brake rigging. If the travel exceeds or falls short of this distance, the equipment must be set out for repair.[230]
Plate (US)
The measurement of a freight car's vertical clearance. Plate F and above is considered excess height, and such cars must avoid low-clearance routes.[231] See also: Loading gauge
Point machine (UK)
A motor or device which operates points
Points (UK)
The articulating rails that determine the route to be taken. Also, another term for switch.
Pony truck
A two-wheel truck or bogie at the front of a locomotive[232]
Porch
The extended walkway at either end of a U.S. locomotive[233]
Porter
There are various types of porter:
  • A baggage porter assisted with luggage.
  • An operating porter assisted with safeworking duties.
  • A station porter assisted with general station duties.
  • A lad porter was a junior station porter.
Portion working
The practice of coupling two or more passenger trains together over common sections of their respective routes, but otherwise operating the trains separately[234][235]
A position light signal
Position light signal
A block signal in which the position of the lights determine the meaning of the aspect shown
Positive train control (PTC)
A system of functional requirements for monitoring and controlling train movements to provide increased safety
Possession
A period of time when one or more tracks are closed for maintenance. For the duration of work a person in charge of possession (PICOP) has control of the line. When work is complete the possession is relinquished and control of the line handed back to the signaller.[236]
Pound
The weight (and thus the cross section) of a length of rail. A heavier rail can carry heavier loads with less distortion and less damage to the rails themselves and the roadbed.
Power
A locomotive or group of connected (MU'd) locomotives serving as the motive power for a train[213]
Power braking
Pulling against the train brakes at the higher end of the locomotive's power output (e.g. notches five through eight on a conventional throttle). This is considered wasteful of fuel and brake shoes, and is therefore discouraged by most operating departments.[237][238]
The Prairie wheel arrangement
Prairie type
A steam locomotive with a 2-6-2 wheel arrangement[239]
Prime mover
The internal combustion engine of a diesel locomotive
Pull-apart
A rail broken from cold-related contraction[240][241]
A push pole
Push pole
A pole about 12 feet (366 cm) long and having a diameter of 5 inches (127 mm). They were placed in receptacles called push pole pockets. The pole was placed between the locomotive and the freight car, and used to push the car on or off a siding or to another track. Used between 1870 and the mid-1960s.[242]
Push–pull
A mode of operation whereby a locomotive-hauled train may be driven with the locomotive at the front, middle or back of the train. See also: Auto train. See Top and tail for train with locomotives at both front and back.[213]

Q[edit]

Q-inspection (US), quarterly, or periodic inspection
A federally mandated safety inspection performed on a locomotive every 92 operating days[243]
Quiet zone (US)
A designation by the Federal Railroad Administration that removes the requirement for train operators to sound their horn when approaching each public crossing in a certain area, often near residential neighborhoods who have asked for the status. Because the train does not sound its horn while approaching the crossings, safety upgrades to all of the crossings must be made in order to compensate. These upgrades usually include double gates, additional signage, lights, and bells, if they are not already present. Additionally, the residents requesting the status must indemnify the railroad from any resulting crossing mishaps.[244]

R[edit]

Rack railway, rack-and-pinion railway, or cog railway
A steep grade railway with a toothed rack rail, usually between the running rails
Railbus
A passenger rail vehicle (typically non-articulated or rigid frame) that was derived from bus propulsion and construction technology, but which may evolve into larger dimensions, performance, and characteristics similar in appearance to a light DMU railcar
Railcar
A powered single unit or articulated passenger car, usually “railroad-derived” light DMU or EMU, with a driver's cab at one or both ends
Railfan
A hobbyist or enthusiast of trains
Rail grinder
A machine used to remove irregularities in the surface of the rails that may be self-powered or part of a consist
Rail profiles for flat-bottom and bullhead rails
Rail profile
The cross section shape of rail. There are many rail profiles which are often specific to individual railroads. Rails need to be periodically scanned electronically, the data inspected and analysed, then re-profiled with rail grinding machines to maintain the safe and proper "rail profile". Rails that cannot be brought back to the proper rail profile are condemned and replaced.
Rail sled (US)
A form of wheel chock that slips onto the rail under the wheel of rolling stock which prevents the vehicle from rolling[citation needed]
Rail squeal
A screeching train-track friction sound, most commonly occurring on sharp curves or heavy braking[245]
Rail tractor
A small petrol (gas) or diesel shunting (switcher) locomotive
Railroad car
Any railroad vehicle other than a locomotive
Railroadiana
Artifacts of railways around the world
Railway line
Washington, D.C.'s Union Station is an example of a railway station
Railway station
A train station, a stopping point for trains, usually with passenger access
Rake (UK)
A set of rolling stock coupled together[252][253]
Red
A colour generally associated with stop, when shown by signals or flags
Red zone
The area between, under, or within a few feet of cars and locomotives. To enter the zone, a ground employee must obtain protection from the locomotive engineer (if a locomotive is coupled) or a blue signal (if no locomotive is coupled).[254][255][256]
Reefer
A refrigerated railcar, used to transport perishable goods[257]
Refuge siding
A siding used as a passing place on a main line, where slow trains may be held whilst an express passes—a simpler, but less convenient, form of the passing loop
Rent-a-wreck (US)
A (usually old) locomotive owned by a leasing company[258]
Reporting mark
A two- to four-letter code, assigned by the Association of American Railroads, that is applied to equipment operating on North American railroads to identify the owner[259][260][261]
A rerail frog or rerailer
Rerail frog or rerailer
A metal casting slotted over the rail near the wheel of a derailed train car. The engine then pushes or pulls the car so that the derailed wheel runs up the rerailer and back onto the track.[262]
Restricted speed (US)
A speed not exceeding 20 mph which allows stopping within half the range of vision short of an obstruction on the tracks[263][264]
Retarder
A device installed in a classification yard used to reduce the speed of freight cars as they are sorted into consists[265]
Reverser or reverser handle
The handle that controls the directional control on a locomotive. See also Cut off.
Ribbon rail
Continuously welded rail[259]
Right-side failure
A failure in a signalling or other safety critical system which leaves the system in a safe condition[266]
Roadrailer
A highway trailer, or semi-trailer, that is specially equipped for direct use on a railroad
Roll-by or rollby (US)
Visual inspection of railroad equipment while it is in motion[267][268]
Rolling stock
1. In UK parlance, any railway vehicle that is not capable of moving under its own power[269]
2. In US parlance, any railroad car or locomotive[259][270][271]
Rookie
See Trainee.
Rotary
Short for rotary snowplow, an extreme-duty railroad snowplow used mainly in the mountain ranges of the American West[272]
A roundhouse and turntable, viewed from above
Roundhouse
A circular or semi-circular structure used for storage and running maintenance of locomotives
Rule G (US)
The universal rule prohibiting the use of drugs and alcohol
Ruling grade
The longest or steepest grade on a division, thus setting the standard for track speeds, locomotive tonnage ratings, and train handling instructions[273]
Runaway
A heavy train that has lost speed control while descending a steep grade, due to either brake failure or poor preparation by the crew[274]
Running track
An other-than-main track, typically providing access to a yard or industry and governed by the requirements of restricted speed[275]
Platform track and a run-round loop at Toyooka Station, Hyogo, Japan, the terminus of the line from Miyazu
Run-round or runaround (US)
The practice of detaching a locomotive from its train, driving it to the other end of the train and re-attaching it, to allow the train to proceed in the direction it has just come from (e.g. when it reaches its destination and forms a service in the other direction).[259][276] See headshunt for diagram of a 'run-round loop'.
Run-through power
Locomotives that remain attached to a manifest or unit train from their home rails over the tracks of a receiving railroad until the train reaches its final destination[277]

S[edit]

Saddle tank
A tank locomotive with the water tank mounted on top of the boiler like a saddle[278]
Safety Appliance Act (US)
A law mandating air brakes, grab bars, and automatic couplers
Safeworking
The system of rules and equipment designed to ensure the safe operation of trains[279]
Sand
A granular material sprayed onto the rail just in front of the drive wheels to improve traction
Sandbox
A container on locomotives and self-propelled multiple units, or trams, that run on tramways and adhesion railways. The container holds sand which can be dropped onto the rail to improve rail adhesion under wet, steep, or slippery rail conditions. The sandbox and operating mechanism are collectively known as sanding gear.
Sandite
Consists of a mixture of sand, aluminium, and a unique type of adhesive, used instead of plain sand for extreme slippery rail conditions
The Santa Fe wheel arrangement
Santa Fe type
A steam locomotive with a 2-10-2 wheel arrangement, named for the Atchison, Topeka and Santa Fe Railway—the first railroad to use such a configuration[280][281]
Saturated locomotive
A steam locomotive not equipped with a superheater; the steam thus remains at the same temperature as the water in the boiler[citation needed]
Scale
Solid debris distilled from boiling water in a steam locomotive. To prevent corrosion damage from scale build-up, the locomotive must undergo a boiler wash once each operating month.[282]
Schnabel car
A specialized type of freight car for extra heavy and over sized loads where the car is loaded in such a way that the load forms part of the car superstructure
Searchlight
A signal with a single light source usually capable of displaying three different colors. An internal mechanism governs the color displayed.[278]
Section
A division of track for tracking occupation[citation needed]
A British lower-quadrant semaphore signal with subsidiary arm below
Semaphore signal
A type of signal that has a moving arm to change the indication
Shay locomotive
A type of geared steam locomotive built to the patents of Ephraim Shay[278]
Shoofly (US)
A temporary stretch of track that takes trains around construction or an accident scene.[278]
Shunt
In UK and Australian parlance, to make up and divide trains in sidings, to move trains to or from sidings, or to move trains between platforms in a station[283]
In US parlance, to bond the rails/power feeds between sections on trolley/light rail systems, so as to temporarily bridge past dead areas[citation needed]
Shunter (UK)
1. A small locomotive used for assembling trains and moving railroad cars around
2. A person involved in such work[278]
Shuttle train
A train, usually a passenger service, that runs back and forth, usually over a relatively short distance, such as between a junction station and a branch-line terminus.
Side tank
A tank locomotive with water tanks mounted each side of the boiler
Siding
A section of track off the main line. Sidings are often used for storing rolling stock or freight. A siding is also used as a form of rail access for warehouses and other businesses, where the siding will often meet up with loading docks at rail car height in the building. In the U.S. the term is also used to cover the British term: loop. Also, a passing track in the U.S.
A two-head color position signal on CSXT mainline near Magnolia, West Virginia where the left head displays "Stop" and the right, "Clear"
Signal
A device that indicates the condition of the line ahead to the driver of a train
Signal aspect
The information conveyed to a railroad vehicle operator by a block signal. Signals may use colored lights, position-significant lights or mechanical semaphores to generate various aspects.[citation needed]
Signal box
A building or room which houses signal levers (usually in a frame), a control panel or a VDU-based control system
Signal passed at danger (SPAD) (UK)
A incident when a train disobeys a stop signal
Signal-post telephone (SPT) (UK)
A direct no-dial telephone link to the relevant signal box, positioned on or near a signal[284]
Signalman
A person in charge of the signalling at a station or junction, often in a signal box
Six-foot
The narrow corridor between a pair of closely spaced tracks, nominally six feet wide. See also four-foot and ten-foot.[285]
Slack (UK)
A temporary speed restriction to protect, for example, sections of track in poor condition and awaiting repair. Also applies to the timing tolerance included in timetable schedules to allow for such restrictions.[citation needed]
Slack action (UK/US)
Looseness in a train caused by mating clearances in couplers[278]
Sleeper (UK) or tie (US)
Bars placed perpendicular to the rail tracks to support the rails. Generally of wood, concrete, or steel, with hardware to affix the rails, usually spikes, nails, or bolts. Note in the UK baseplates and clips are used to affix the rail to the sleeper. Spikes are widely used in North America.
Slip coach (UK)
A passenger coach that is disconnected from a train without the train having to stop. While the train continued on its route, the slip coach would be guided and stopped by a guard on board using the coach's own brake mechanism. This practice was almost entirely limited to the United Kingdom and was discontinued in the 1960s.[286][287]
Slippery rail
The condition of fallen leaves or other debris lying on and clinging to a railroad track that could cause train wheel slippage, resulting in premature wheel wear and train delays
Slow order
A local speed restriction below the track's normal speed limit often designated by yellow and green flags. Slow orders can be imposed on a temporary basis to protect, for example, maintenance of way employees while sections of track are under repair. Widely used in areas where track is substandard and in need of repair.
Slug
A locomotive that contains traction motors yet lacks the diesel engine to create its own power, which is instead supplied by a connected mother locomotive[278]
Smokebox
An enclosed (normally cylindrical) space attached to the end of the boiler opposite the firebox on a steam locomotive (normally the front). Supports the stack/chimney; steam pipes to and from the cylinders pass through here; contains the blastpipe/exhaust nozzle where the exhaust steam is used to provide draft for the fire. In superheated locomotives, also contains the superheater header and (optionally) a front-end throttle. A smokebox door allows access for cleaning.
Smokestack (abbr. stack) (US)
A chimney[288]
Snowplow, snow plow, snowplough, or snow plough
A rail service vehicle used for snow removal from train tracks[289][290]
Snow shed
A long shelter erected over a railroad track on the side of a mountain to protect the line from avalanches and drifting[291]
Span bolster
The beam between two bogies
A privately owned speeder on display at the Mad City Model Railroad Show and Sale in Madison, Wisconsin
Speeder (US)
A small vehicle used to let track inspectors and work crews move quickly to and from work sites. They are largely obsolete, having been replaced by trucks and SUVs with retractable flanged wheels.[292]
Two unused and one heavily corroded spikes, with an inch ruler shown for scale
Spike
A bolt, pin, or nail used to hold rails, or plates connected to the rails (known as tie plates), to sleepers (ties)
Spiral easement
See Track transition curve. Also known as tangent lead-in.[278]
A Jordan spreader
Spreader
Maintenance of way equipment designed to spread or shape ballast profiles, remove snow, clean and dig ditches as well as trim embankments
Spur (US)
A stretch of rail that branches off the main line. Different from a siding or stub, spurs can be miles in length, and usually have only one destination at the end.[278]
Self-propelled ultrasonic rail testing (SPURT) (India)
A self-propelled rail defect detector car[293]
Staff and ticket
A method of safeworking involving a token[when defined as?][278]
Standard gauge
A gauge where the rails are spaced 1,435 mm (4 ft 8 12 in) apart—by far the most common gauge worldwide[278]
Station master
The person in charge of a station
Station pilot (UK)
Shunting engine based at a major passenger station and used for passenger train shunting duties
Steam generator
A device generally used in passenger trains to create steam for heating. The steam generator is usually in the locomotive but may also be located in other cars.[278]
Steam reverser
A reversing gear worked by a steam piston controlled from the cab
Steeplecab (US)
An electric locomotive with a central cab and sloping "noses" on each end
Steward
A person in a dining car with a role similar to that of a Maitre d’Hotel[citation needed]
Stretch braking
Pulling against train brakes at the lower end of a locomotive's power output (e.g. notches one through four) of a conventional throttle, thus keeping coupler slack stretched and permitting smoother train handling. This is considered most effective on undulating track profiles or when dynamic braking is not available.[citation needed]
Stub (North America)
A relatively short section of track that ends at a bumper or wheelstop, most often found in a terminal. Not to be confused with a spur, which may be miles (kilometers) in length.[citation needed]
Subway (UK)
A tunnel passing underneath the railway tracks to allow passengers to cross from one platform to another
Subway (US)
A railroad that runs underground, generally in a large city. Subways are also considered "heavy rail" because they operate on their own dedicated track. Not to be confused with the interurban definition of subway, which is normally a light-rail passenger service running mostly underground.
Supercharger
A mechanical device that boosts the pressure of engine intake air to above atmospheric level, causing an increase in power. Not to be confused with the blower used to scavenge the cylinders of a naturally aspirated two-stroke Diesel engine.
Superelevation (UK)
The banking of railroad track on curves. Specifically, the practice on high speed lines (where the cant needs to be higher) of gently introducing the elevation of the outer rail before the bend starts, in order to avoid sudden lurches. Synonymous with cant.[278]
Superheater
A device in a steam locomotive that raises the temperature of saturated steam substantially beyond the boiling point of water, increasing power and efficiency[278]
Survey
To determine the position of constructed objects, including rail infrastructure, in relation to the earth's surface. This is accomplished by measuring angles and distances based on the principles of triangulation.
Surveyor
A person assigned to perform survey work
Switch (US)
Synonymous with Points and Turnout.[278]
A pair of EMD SW900 switchers
Switcher (US) or shunter (UK)
A small locomotive used for assembling trains and moving railroad cars around[278]
Switchman
A railroad worker responsible for assembling trains and switching railroad cars in a yard

T[edit]

A track tamping machine
Tamping machine
Generally, a locomotive used in track maintenance and equipped with track lifting facilities, and paddles enabling ballast to be pushed beneath a rail track so as to assure its level and cant
Tank car
A type of rolling stock designed to transport liquid and gaseous commodities
Tank engine (UK)
A locomotive that carries its own fuel and water instead of hauling a tender. The fuel is usually in a bunker behind the cab and the water in tanks on either side of, above, or below the boiler (respectively: side tank, saddle tank, well tank).
Team track
A spur or siding for loading freight, often used by firms not having their own direct rail access[294]
Tender
A specialized rail car attached to a steam locomotive to carry its fuel and water supplies, along with tools and flagging equipment
Ten-foot
An area, usually at least ten feet wide, between a pair of widely spaced tracks, wide enough to form a place of safety in which railway workers can stand while a train goes past. See also four-foot and six-foot.[295]
The ten-wheeler wheel arrangement
Ten-wheeler (US)
A steam locomotive with a 4-6-0 wheel arrangement[citation needed]
Terminal station (U.S.) or terminus (UK)
A station sited where a railway line or service ends or terminates
Terminal railroad (or terminal railway)
A company in the United States that owns no cars of its own and transports only the railroad cars of other companies around a specific terminal station[296]
The Texas wheel arrangement
Texas type
A steam locomotive with a 2-10-4 wheel arrangement[citation needed]
The T (US)
A nickname for Massachusetts Bay Transportation Authority (MBTA)—the Subway service through Boston, Massachusetts
Theatre indicator (UK)
An illuminated number usually attached to signal indicating arrival platform for train approaching a station[citation needed]
Third rail
An electrified rail that runs along the tracks, giving power to trains. Used mostly in subways and rapid transit systems.[294]
Through coach
A passenger coach that is disconnected from one train and attached to another before continuing on with its journey, thus avoiding the need for passengers themselves to switch trains[287]
Through platform
The standard platform and track arrangement at a station. The train pulls alongside the platform, arriving from one end of the station, and may pass out the other end of the station by continuing along the same track[297]
Through routing
Combining two or more different railways onto a common length of track. This is often done to eliminate redundant trackage or improve service.[citation needed]
Wood (left track) and concrete (right track) ties are visible under the rails.
Tie (US) or sleeper (UK)
A rectangular object used as a base for railroad tracks[294]
Tie plate
A plate which is bolted to sleepers, holding the rails in place
Timetable direction
The general compass direction of a railroad or subdivision, as specified by its official timetable rulebook. Only the four cardinal compass points may be used to state a train's direction of travel.[citation needed]
Trailer on flat car (TOFC)
Intermodal freight transport[294]
Token
A physical object given to a locomotive driver to authorize use a particular stretch of single track
Top and tail (UK)
A train with locomotives at both ends, for ease of changing direction
Torpedo (US) or detonator (UK)
A small explosive device strapped to the top of the rail to alert an approaching train of danger ahead. A torpedo creates a loud noise upon contact with a locomotive wheel, signaling the engineer to reduce speed to 20 mph or less; the train cannot resume its original speed until it has traveled at least a mile beyond where it encountered the device. Traditionally used in pairs to ensure that the sound registered with train crews, torpedoes today are essentially obsolete as modern locomotive cabs' soundproof construction renders the devices useless.[294]
Trackage rights (US) or running powers (UK)
The legal right of one railroad company to use the tracks of another, as agreed to by the companies concerned or their predecessors; may also be ordered by government regulators, for example, as a condition of a merger[294]
Track bed or trackbed
The foundation of rail tracks
Track circuit
An electrical circuit that detects the presence or absence of locomotives or cars in a section or block of track, and provides real-time inputs to signaling logic
Trackside objects
See Wayobjects.
Track bulletin
A form used by railroad employees that shows the locations of slow orders, maintenance of way work locations, and other conditions affecting the track and movement of trains[citation needed]
Track transition curve
The gradual application of superelevation and tighter curve radius, calculated with reference to the anticipated line speed and the final curve radius, on the approach to a bend. Also known as the transition spiral and spiral easement.
Track warrant (TWC) (US) or occupancy control system (OCS) (CA)
A system for authorizing main track occupancy using defined points such as mileposts, switches, or stations[294]
Traction motor
A large electric motor that powers the driving wheels of an electric or diesel-electric locomotive[294]
Traction supply
The electric source for the traction motors of electric trains[citation needed]
Tractive effort
The pulling or pushing force exerted by a locomotive or other vehicle
Trailing
A turnout is trailing if the two legs of that turnout merge in the direction of travel. See Facing.
Train engine (UK) or road engine (US)
The locomotive closest to the train during a double-heading operation.
Trainman
An employee assigned to train service, such as a conductor, brakeman, or switchman
Trainmaster
A dispatcher—the person in charge of all traffic within assigned blocks[citation needed]
Train order (US)
A system for authorizing main track occupancy using telephone, telegraph, and wayside stations to pass authority to train crews
Train register (UK)
A book or loose-leaf sheets kept in a signal box and used to record the passage of trains, messages passed, and other prescribed events[298]
Trainset
A group of rolling stock that is permanently or semi-permanently coupled together to form a unified set of equipment. Trainsets are most often used in passenger train configurations.[citation needed]
Tram
A city-based rail system that typically shares its operational space with other vehicles and often runs on, across, or down the center of city streets
Tram-train
Trams that are designed to run both on the tracks of a city-based rail system and on the existing railway networks. Tram-trains' dual-voltage capability makes it possible to operate at lower speeds on city streets and at over 60 miles per hour (97 km/h) on main line tracks allowing travel in an extended geographical area without changing the method of transport.
Treadle
A mechanical or electrical device for detecting the presence of a rail vehicle with pin-point accuracy, unlike a track circuit, which provides detection over an arbitrary distances
Triangle (UK) or wye (US)
A track layout that facilitates the turning of engines or complete trains
Truck (North America)
See Bogie.
Turnout
A switch (also known as a set of points)[citation needed]
A turntable in Toronto, Canada
Turntable
A section of track that can rotate, allowing locomotives and rolling stock to be reversed, and also allow a large number of engine maintenance sidings to be accessed in a small area

U[edit]

Underbridge (UK)
A bridge carrying the railway and allowing a roadway to pass under the railway[299]
The main concourse building and façade of Cincinnati Union Terminal
Union station, union terminal (US), or joint station (UK)
A railway station at which tracks and facilities are shared by two or more railway companies[300]
Unit train
A train in which all cars (wagons) carry the same commodity and are shipped from the same origin to the same destination, without being split up or stored en route[301]
Up (UK)
A direction (usually towards London, other capital city, or the headquarters of the railway concerned) or side (on left-running railways, the left side when facing in the up direction). The opposite of down. The up direction is usually associated with even-numbered trains and signals.[citation needed]
UP (US)
The common name and reporting mark for the Union Pacific Railroad[302]

V[edit]

Vacuum brake
A continuous train brake which is fail-safe in operation; the brake is powered by a vacuum from the locomotive but the application is actually by atmospheric pressure when the vacuum is released. Now largely superseded by the air brake.
Valve gear
The linkage between a steam locomotive's pistons, steam valves, and driving rods to operate inlet and outlet valves in the required sequence[303]
A van or boxcar
Van (UK) or boxcar (US)
An enclosed railroad car, or piece of rolling stock, used to transport freight
Van (Eastern CA)
A caboose[citation needed]

W[edit]

Water column (US), water crane (UK), or standpipe
A device used for delivering a large volume of water into the tank or tender of a steam locomotive
Water gauge or water glass
A device showing the level of water in the boiler[304]
Way car
An alternate term for a caboose used by the Chicago, Burlington and Quincy Railroad, Chicago and North Western Railway, and Atchison, Topeka and Santa Fe Railway[304]
Way freight
See Local train.
Wayobjects or wayside objects
Trackside objects or any structures at the wayside or beside the rail tracks usually within the right-of-way, such as railway signals, third rails, overhead lines and their supports, electrification systems, platforms, or boom barriers[citation needed]
Wayside
Trackside[citation needed]
Well tank
A type of tank locomotive. The water tank is mounted between the frame plates, beneath the cab and boiler.
Well wagon (UIC)
A flat wagon with a depressed centre used for carrying extra tall loads
Wheel
The rolling component typically pressed onto an axle and mounted on a rail car or locomotive truck or bogie. Wheels are cast or forged (wrought) and are heat treated to have a specific hardness. New wheels are trued to a specific profile before being pressed onto an axle. All wheel profiles need to be periodically monitored to insure proper wheel to rail interface. Improperly trued wheels increase rolling resistance, reduce energy efficiency and may create unsafe operation. A railroad wheel typically consists of two main parts: the wheel itself, and the tire around the outside. A rail tire is itself steel, and is typically heated and pressed onto the wheel, where it remains firmly as it shrinks and cools.
Wheel climb
The process of a wheel climbing up and often off the inside or gauge side of the rail. It is a major source of derailments. Wheel climb is more likely to occur in curves with wheels whose flanges are worn or have improper angles. See Rail adhesion.
Wheel flange
The inner section of a wheel that rides between the two rails. The angle between the wheel tread and flange is often specific to the rail to prevent wheel climb and possible derailments. See Rail adhesion. The wheel flange is part of the wheel tire.
Wheel-rail interface
The on-contact interaction between wheels and rails. The term is used in connection with the design and management of their interaction.
Wheel slip
The loss of traction due to a slippery rail or wheel. Wheel slip was common with steam engines as they started to move due to the excessive torque often generated at low speed. Steam engines carried sand dispensing gear to increase traction at the start of motion.[304]
A wheeltapper at work on the Bulgarian railway
Wheeltapper
An historical railway occupation; people employed to tap train wheels with hammers and listen to the sound made to determine the integrity of the wheel; cracked wheels, like cracked bells, do not sound the same as their intact counterparts. The job was associated with the steam age, but they still operate in some eastern European countries. Modern planned maintenance procedures have mostly obviated the need for the wheel-tapper.
Wheel tread
The slightly conical section (often with a 1 in 20 slope) of a railroad wheel that is the primary contact point with the rail. See Rail adhesion.
Whistle
Train whistles are used as a safety warning and also by the engineer to communicate to other railroad workers. See train whistle for a description of the whistle code used to communicate. Also a nickname for an air horn on a diesel locomotive. Steam engine whistles were historically known as chimes in the US during the 19th century.
A double whistle post
Whistle post
An advanced warning to the engineer of an upcoming grade crossing. It is the point at which the engineer should begin sounding the whistle or horn.
Whyte notation
A system of describing steam locomotive wheel arrangements (e.g. 4-6-4, 2-10-2). The first number indicates the number of "pilot" wheels that help lead the engine into turns. The second is the number of coupled wheels ("drivers"). Third are the trailing idler wheels, usually to provide support to larger fireboxes. Articulated locomotives are similarly described. For example, a Union Pacific "Big Boy" would be described as a 4-8-8-4, wherein the pilot has four wheels, followed by two sets of drivers, eight wheels per set, and a four-wheel trailing bogie under the firebox. The numbers include the wheels on both sides of the engine, so a 2-8-2 engine would have one idler, four drivers, and a final idler on each side of the engine.
Wigwag
A largely superseded Level or Grade Crossing Warning Signal consisting of a swinging disc facing road traffic with a red light in the centre. The disc normally hangs straight down, but an approaching train will set it swinging from side to side, the red light will illuminate or flash, and a bell will ring.
Working water, foaming, or priming
The condition of a steam locomotive drawing water through its throttle valve, cylinders, and smokestack, often causing damage to the cylinders or running gear[citation needed]
Wrong-side failure
A failure in a signalling system that leaves the system in a dangerous condition[citation needed]
A satellite image of a wye, where two approaches to the interchange have been abandoned
Wye (US) or triangle (UK)
Three railroad tracks in a triangular form with switches at all three corners. With sufficient lengths of track leading away in all three directions, a wye can turn a train of any length.[304]

X[edit]

An X-ing sign
X-ing (US)
Crossing[citation needed]

Y[edit]

A railroad yard in Chicago, Illinois, as seen in December 1942
Yard
A location where rolling stock is switched to and from trains, freight is loaded or unloaded, and consists made up[305]
Yardmaster
The person responsible for conducting all traffic within the yard in order to assemble or disassemble consists[citation needed]
Yellow
A colour associated with a warning or a need to slow down when used by flags or signals, but the exact meaning varies from railway to railway
The Yellowstone wheel arrangement
Yellowstone type
A steam locomotive with a 2-8-8-4 wheel arrangement[citation needed]

Z[edit]

Zig zag (US) or switchback
A way of climbing hills, where a train reverses direction for a while, and then reverses again to continue its journey

See also[edit]

References[edit]

  1. ^ "Transport Thesaurus". UIC.org. 1995. Retrieved 2009-05-20. 
  2. ^ "Railroad Dictionary: T". CSX. Retrieved 18 September 2014. 
  3. ^ James R. Loumiet; Bernard S. Abrams; William G. Jungbauer (2005). "3". Train Accident Reconstruction and FELA and Railroad Litigation. Lawyers & Judges Publishing Company. p. 20. ISBN 9781930056930. Retrieved 18 September 2014. 
  4. ^ White, John (1968). A History of the American Locomotive - Its Development: 1830–1880. New York: Dover Publications. p. 57. ISBN 0-486-23818-0. 
  5. ^ "NORAC Operating Rules - Eighth Edition – January 1, 2003". Indiana Harbor Belt Railroad. Retrieved 18 September 2014. 
  6. ^ 49 C.F.R. 241
  7. ^ Solomon, Brian (2000). The American Diesel Locomotives. Osceola, WI: MBI Publishing Company. pp. 56–57. ISBN 0-7603-0666-4. 
  8. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 6. ISBN 978-1-84728-643-7. 
  9. ^ "Combined Adhesion ad Cog-Wheel Railways". The Railway News and Joint Stock Journal (London) 51 (1307): 100–101. January 19, 1889. 
  10. ^ McClellan, George B. (November 21, 1854). "Memoranda on Railways". Reports of Explorations and Surveys to Ascertain the Most Practicable and Economical Route for a Railroad from the Mississipi River to the Pacific Ocean 1. p. 116. 
  11. ^ Wood, W.W. (1920) [first published 1909]. Wood's Westinghouse E-T Air Brake Instruction Pocket Book (second ed.). New York: The Norman W. Henley Publishing Co. 
  12. ^ "§ 238.237: Automated monitoring". The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: Office of the Federal Register, National Archives and Records Administration. October 1, 2006. p. 691. 
  13. ^ "EPR 012: Testing of locomotive all weather adhesion". RailCorp. October 2011. Retrieved October 25, 2014. 
  14. ^ Aylmer-Small, Sidney (1908). "Lesson 28: Alternators". Electrical railroading; or, Electricity as applied to railroad transportation. Chicago: Frederick J. Drake & Co. pp. 456–463. 
  15. ^ a b c d "Railroading Glossary: A". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-31. Retrieved 2013-02-20. 
  16. ^ Solomon, Brian (2009). Alco Locomotives. MBI Publishing Company. p. 8. ISBN 9781616731366. 
  17. ^ White (1968), p. 46.
  18. ^ "Railroad dictionary - Angel Seat". CSX. Retrieved 18 September 2014. 
  19. ^ Darcy Zabel (2005). The (Underground) Railroad in African American Literature. Peter Lang. p. 5. ISBN 9780820468167. 
  20. ^ US 1031835, Richard Webb Burnett, "Angle-Cock Hanger for Air-Brake Pipes of Railway Cars", published 9 July 1912, assigned to Richard Webb Burnett 
  21. ^ Roy V. Wright and Charles N. Winter, ed. (1922). Locomotive Cyclopedia of American Practice (sixth ed.). New York: Simmons-Boardman Publishing Co. p. 102. 
  22. ^ "4-4-2 "Atlantic" Type Locomotives". SteamLocomotive.com. Retrieved October 13, 2014. 
  23. ^ Locomotive Cyclopedia of American Practice. American Railway Master Mechanics' Association. p. 103. 
  24. ^ Lamb, J. Parker (2003). "4: The Second Generation". Perfecting the American Steam Locomotive. Bloomington, IN: Indiana University Press. p. 47. ISBN 0-253-34219-8. 
  25. ^ Gallamore, Robert E.; Meyer, John R. (2014). American Railroads: Decline and Rennaissance in the Twentieth Century. Harvard University Press. pp. 384–385. ISBN 978-0-674-72564-5. 
  26. ^ Barry, Steve (2008). Railroad Rolling Stock. Minneapolis, MN: Voyageur Press, an imprint of MBI Publishing Company. pp. 64–65. ISBN 978-0-7603-3260-3. 
  27. ^ "The Evolution of Railway Axlebox Technology". Evolution (SKF). 2010-12-07. Retrieved 2014-09-18. 
  28. ^ "Glossary: A". Railway-Technical.com. Railway Technical Web Pages. 2014. Retrieved 2014-11-19. 
  29. ^ "US Railfan Jargon". NTRACKAGE Writes (New Mexico Rail Runners) (199): page 5. October 2006. Archived from the original on 28 February 2008. Retrieved 2008-01-24. 
  30. ^ Marre, Louis A. (1995). Diesel Locomotives: The First 50 Years. Waukesha, WI: Kalmbach Publishing Co. ISBN 0-89024-258-5. 
  31. ^ Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Kalmbach Books. 
  32. ^ a b c d e f g "Railroading Glossary: B". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-21. Retrieved 2013-02-20. 
  33. ^ "§ 215.9 Movement of defective cars for repair". The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: Office of the Federal Register, National Archives and Records Administration. October 1, 2006. pp. 177–178. 
  34. ^ "Air Brake/Train Handling Rulebook - Procedure 3.2.2". Mid Continent railway museum. Retrieved 19 September 2014. 
  35. ^ Brown, John K. (1995). The Baldwin Locomotive Works, 1831-1915: A Study in American Industrial Practice. Baltimore, MD: The Johns Hopkins University Press. ISBN 0-8018-5047-9. 
  36. ^ Bianculli, Anthony J. (2003). Trains and Technology: The American Railroad in the Nineteenth Century. 3: Track and Structures. Rosemont Publishing & Printing Corp. p. 40. ISBN 0-87413-802-7. 
  37. ^ "Glossary". MTA.info. MTA. p. 2. Retrieved 12 October 2014. 
  38. ^ Lamb, J. Parker (2003). Perfecting the American Steam Locomotive. Bloomington, IN: Indiana University Press. pp. 85–88. ISBN 0-253-34219-8. 
  39. ^ Springirth, Kenneth C. (2010). Northwestern Pennsylvania Railroads. Images of Rail. Arcadia Publishing. p. 68. ISBN 978-0-7385-7347-2. 
  40. ^ Solomon, Brian (2009). Alco Locomotives. MBI Publishing Company. p. 52. 
  41. ^ White (1968).
  42. ^ "Railroad Dictionary: B". CSX.com. CSX Corporation. 2012. Retrieved 2014-11-15. 
  43. ^ "Trailer Booster". Official Proceedings of the New York Railroad Club 30. 1920. pp. 6072–6074. 
  44. ^ Welsh, Joe (2006) [first published 1999 by Andover Junction Publications]. The American Railroad: Working for the Nation. St. Paul, MN: MBI Publishing Company. p. 58. ISBN 978-0-7603-1631-3. 
  45. ^ "Air Brakes - Basics". Railway Technical Web Pages. Retrieved 19 September 2014. 
  46. ^ "50 years of the Bubble car". Chiltern Railways. Retrieved 19 September 2014. 
  47. ^ International Railway Congress Association (1906). "Question VII". Proceedings: Seventh Session, Washington, May 1905 II (English ed.). Brussels: P. Weissenbruch, Printer to the King. pp. 3–20. 
  48. ^ Ed Sobey (2006). A Field Guide to Roadside Technology. Chicago Review Press. p. 20. ISBN 9781613741795. 
  49. ^ Fowler, George L. (1906). Locomotive Dictionary; compiled for American Railway Master Mechanics' Association (first ed.). New York, Chicago and London: The Railroad Gazette and The Railway Gazette. p. 15. 
  50. ^ Halberstadt, Hans (1996). Modern Diesel Locomotives. Osceola, WI: MBI Publishing Co. pp. 61–63. ISBN 0-7603-0199-9. 
  51. ^ a b c d e f g h "Railroading Glossary: C". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  52. ^ British Railway Telegraphic Codewordsfrom booklet BR30064 (accessed 2009-02-12)
  53. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 62. ISBN 978-1-84728-643-7. 
  54. ^ Solomon, Brian (2009). Alco Locomotives. MBI Publishing Company. p. 70. 
  55. ^ Lamb, J. Parker (2003). Perfecting the American Steam Locomotive. Bloomington, IN: Indiana University Press. p. 107. ISBN 0-253-34219-8. 
  56. ^ Taylor, John (June 1952). "Name That Locomotive". Boy's Life (Boy Scouts of America): 40. 
  57. ^ Wegman, Mark (2008). "34: The City Streamliners". American Passenger Trains and Locomotives Illustrated. Minneapolis, MN: Voyageur Press, an imprint of MBI Publishing Company. p. 144. ISBN 978-0-7603-3475-1. 
  58. ^ Russell, Benjamin (30 November 1999). "RE: EL/Chessie Pool power". Retrieved 2008-01-24. 
  59. ^ "3 Bay ACF Covered Hopper - C&O #607190". Model Junction. Retrieved 2008-01-24. 
  60. ^ "Locomotive Stoker and Coal Pusher". RailArchive.net. Retrieved 2 October 2014. 
  61. ^ Transportation Safety Board of Canada (April 28, 2002). "Railway Investigation Report R02V0057". Retrieved October 19, 2014. 
  62. ^ Velazquez, Matthew (October 15, 2014). How to Operate a Diesel Locomotive (slide presentation). Retrieved October 19, 2014. 
  63. ^ "2013 Elec.P32BWH-P40-P42 Study Guide". Quizlet. Retrieved October 19, 2014. 
  64. ^ White (1968), p 209-210.
  65. ^ "New Locomotives, Swiss State Railways". The Locomotive Magazine XII (166): 98. June 15, 1906. 
  66. ^ American Railway Master Mechanics' Association. "Consolidation Type Locomotives". Locomotive Cyclopedia of American Practice. pp. 31 and 125–127. 
  67. ^ Chapman, Robert L. (1986). New Dictionary of American Slang (3rd ed.). Harper & Row. p. 83. 
  68. ^ Irwin, Godfrey (ed.) (1931). "American Tramp and Underworld Slang". Hobo Terminology. London: Scholartis; republished by the Original Hobo Nickel Society. 
  69. ^ McIntyre, Terry L. (1969). "The Language of Railroading". American Speech 44 (4): 243–62. doi:10.2307/454681. 
  70. ^ a b White (1968), p 465-466.
  71. ^ White (1968), p 186-187.
  72. ^ Illinois. Appellate Court (1913). "Jorte v. Chicago & Alton R. Co., 171 Ill. App. 179". Reports of Cases Determined in the Appellate Courts of Illinois 171. Chicago: Callaghan & Co. p. 182. 
  73. ^ Supreme Court Appellate Division - Third Department: John L. Nolan v. A. Vedder Magee, Blakeslee Lumber Company, Veeder & Brown, Knapp & Hotchkiss Lumber Company and The Crane & Veeder Company. New York: The Reporter Co. 1913. 
  74. ^ "Railroad Related Terms". AlaskaRails.org. Retrieved 2 October 2014. 
  75. ^ "Steam Locomotive Glossary". Railway-Technical.com. 
  76. ^ New York (State) Board of Railroad Commissioners (1903). Annual Report, Part 1. Albany, NY: The Argus Company, Printers. p. 918. 
  77. ^ Holloway, Keith (13 June 2006). "Failure to adhere to track warrant control rules caused collision". NTSB press release (National Transportation Safety Board). Retrieved 2009-05-29. "Non-signaled (dark) territory presents a unique problem for rail safety" 
  78. ^ Prince, Richard E. (2000) [first published 1966]. Seaboard Air Line Railway: Steam Boats, Locomotives, and History. Bloomington, IN: Indiana University Press. p. 163. ISBN 0-253-33695-3. 
  79. ^ "Development of American Steam Locomotives". Locomotive Firemen and Enginemen's Magazine (Indianapolis, IN: Brotherhood of Locomotive Firemen and Enginemen) 43 (6): 777. December 1907. 
  80. ^ American Railway Master Mechanics' Association. Locomotive Cyclopedia of American Practice. p. 102. 
  81. ^ a b c d e f "Railroading Glossary: D". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-30. Retrieved 2013-02-20. 
  82. ^ "Ditch Lights". American Rails. Retrieved 2 October 2014. 
  83. ^ Railway Track Engineering (fourth ed.). New Delhi, India: Tata McGraw Hill Education Private Ltd. 2010 [first edition published 2000]. p. 122. ISBN 978-0-07-068012-8. 
  84. ^ Fitch, Ron J. (2006). Australian Railwayman: From Cadet Engineer to Railways Commissioner. Rosenberg Pulbishing Pty Ltd. ISBN 1-877058-48-3. 
  85. ^ "Grades and Curves". Trains. 
  86. ^ Bosham, John (January 1908). "Trains that Travel in a Contrary Direction on the London and South-Western Railway". The Railway Magazine XXII: 64–71. 
  87. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 104. ISBN 978-1-84728-643-7. 
  88. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 105. ISBN 978-1-84728-643-7. 
  89. ^ "Train Technical Specification". Retrieved 2 October 2014. 
  90. ^ a b "Railroading Glossary: E". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-22. Retrieved 2013-02-20. 
  91. ^ "Air brakes". Railroad.net. Retrieved 2 October 2014. 
  92. ^ "FM 55-20, Chapter 2, Railway Train Operations". GlobalSecurity.org. Retrieved October 13, 2014. 
  93. ^ Phillips, Edmund John (1942). Railroad Operation and Railway Signalling. Chicago: Simmons-Boardman Publishing Co. p. 40. Retrieved October 13, 2014. 
  94. ^ Dalby, Harry Andrews (1904). Train Rules and Train Dispatching: A Practical Guide for Train Dispatchers, Enginemen, Trainmen and All who Have to Do with the Movement of Trains (first ed.). New York and London: The Locomotive Publishing Co. p. 129. Retrieved October 13, 2014. 
  95. ^ "FM 55-20, Chapter 4, Rail Dispatching Operations and Procedures". GlobalSecurity.org. Retrieved October 13, 2014. 
  96. ^ "What Are Fall Plates?". WiseGEEK. Retrieved 2 October 2014. 
  97. ^ McGonigal, Robert S. (1 May 2006). "Understanding railroad reporting marks". Trains.com. Kalmbach Publishing. Retrieved 2007-09-17. 
  98. ^ a b c d e f g "Railroading Glossary: F". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-30. Retrieved 2013-02-20. 
  99. ^ "An Introduction to Train Brakes". The Traffic Accident Reconstruction Origin. Retrieved 2 October 2014. 
  100. ^ White (1968), p102-108.
  101. ^ Adams, Cecil (July 4, 1986). "What does "DO NOT HUMP" mean on the side of railroad cars?". The Straight Dope. Retrieved October 13, 2014. 
  102. ^ "Missouri, K. & T. Ry. Co. of Texas v. Stinson". The Southwestern Reporter 78. St. Paul: West Publishing Company. 1904. pp. 986–987. Retrieved October 13, 2014. 
  103. ^ Walter J. Eagle, ed. (1902). American Negligence Cases XII. New York: Remick, Schilling & Co. p. 185. 
  104. ^ American Negligence Cases XVII. Chicago: Callaghan & Co. 1914. p. 674. 
  105. ^ Lewis, E. W. (1909). Reports of Cases Argued and Determined in the Supreme Court of the Territory of Arizona for the Year 1906 Concluded 10. San Francisco: Bancroft-Whitney Company. p. 240. 
  106. ^ "State of Texas, Palestine, Code of Ordinances, Part II. Code Of Ordinances, Chapter 94. Traffic And Vehicles, Article VI. Railroads§ 94-173. Flying switch prohibited". Legal Zone. Retrieved October 13, 2014. 
  107. ^ "State of Texas, Henrietta, Code of Ordinances, Chapter 21. Railroads, § 21-7. Flying switch prohibited". Legal Zone. Retrieved October 13, 2014. 
  108. ^ Iain Ellis (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 141. ISBN 9781847286437. Retrieved 2 October 2014. 
  109. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 141. ISBN 978-1-84728-643-7. 
  110. ^ Lustig, David (August 2006). "End-of-train devices keep on evolving in back". Trains 66 (8): p 18. ISSN 0041-0934. 
  111. ^ "North American Freight Train Brakes". Railway technical web pages. Retrieved 2 October 2014. 
  112. ^ a b c d "Railroading Glossary: G". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-21. Retrieved 2013-02-20. 
  113. ^ Departments of the Army and the Air Force (October 1965). Operation and Maintenance of Diesel-electric Locomotives. p. 107. 
  114. ^ Wilson, Jeff (2009). The Model Railroader's Guide to Diesel Locomotives. Waukesha, WI: Kalmbach Publishing. ISBN 978-0-89024-761-7. 
  115. ^ GE Transportation (September 19, 2012). "GE and Kazakhstan Temir Zholy (KTZ) Announce GE Evolution Series Passenger Locomotive to be Manufactured in Astana" (Press release). Retrieved October 14, 2014. 
  116. ^ "Go-devil". Merriam-Webster Dictionary. Retrieved October 14, 2014. 
  117. ^ American Dialect Society (1918). Dialect Notes 5. p. 25. 
  118. ^ "Safety Appliances". The Railroad Trainman (Cleveland, OH: Brotherhood of Railroad Trainmen) 27 (7): 581–584. July 1910. 
  119. ^ de Boinod, Adam Jacot (2010) [first published as The Meaning of Tingo in 2005]. I Never Knew There Was a Word For It. Penguin Books. 
  120. ^ Ayto, John; Simpson, John (2010) [first published 1997]. Oxford Dictionary of Modern Slang. Oxford University Press. p. 117. ISBN 978-0199232055. 
  121. ^ Dukkipati, Rao V.; Amyot, Joseph R. (1988). Computer-Aided Simulation in Railway Dynamics. New York: Marcel Dekker, Inc. p. 31. ISBN 0-8247-7787-5. 
  122. ^ Railroad Engineering. John Wiley & Sons, Inc. 1982. pp. 664–666. ISBN 0-471-36400-2. 
  123. ^ a b c d e f g h i "Railroading Glossary: H". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-21. Retrieved 2013-02-20. 
  124. ^ Webb, Brian (1982). The Deltic Locomotives of British Rail. Newton Abbot: David & Charles. p. 40. ISBN 0-7153-8110-5. 
  125. ^ "Railway Terminology: H". Australian Model Railway Association Incorporated. Retrieved 2008-03-08. 
  126. ^ "Glossary". Railway Technical Web Pages. Railway Technical Web Pages. Retrieved 29 August 2012. 
  127. ^ "About IHHA". International Heavy Haul Association. Retrieved October 14, 2014. 
  128. ^ Liu, Jianxin; Wang, Kaiyun; Zhang, Bin; Nong, Hanbiao; Wang, Jun (October 2010). "Dangerous Condition Monitoring Technology of Heavy-haul Train". ICLEM 2010: Logistics for Sustained Economic Development - Infrastructure, Information, Integration. American Society of Civil Engineers. 
  129. ^ Wang, Wang Jianxi; Li, Xiangguo; Huang, Shougang. "Selection of Rail Types for High-speed Railway and Heavy-haul Railway". ICCTP 2010: Integrated Transportation Systems Green, Intelligent, Reliable. American Society of Civil Engineers. 
  130. ^ Loumiet, James R.; Jungbauer, William G. (2005). Train Accident Reconstruction and FELA and Railroad Litigation (fourth ed.). Tucson, AZ: Lawyers & Judges Publishing Co., Inc. p. 10. ISBN 978-1-930056-93-0. 
  131. ^ Berrick, Cathleen A. (February 6, 2007). Passenger Rail Security: Enhanced Federal Leadership Needed to Prioritize and Guide Security Efforts. Washington, DC: United States Government Accountability Office. p. 6. 
  132. ^ "Dover Harbor". National Railway Historical Society, Washington D.C. Chapter, Inc. Retrieved 2008-01-29. 
  133. ^ Zimmerman, Karl (2004). Burlington's Zephyrs. Great Passenger Trains. St. Paul, MN: MBI Publishing Company. p. 11. ISBN 0-7603-1856-5. 
  134. ^ Solomon, Brian (2006). Working on the Railroad. St. Paul, MN: MBI Publishing Company. p. 55. ISBN 0-7603-2220-1. 
  135. ^ "Safety Department". The Railway Conductor (Cedar Rapids, IA). XXXVII (12): 691. December 1920. 
  136. ^ Hinkelman, Edward G. (2008). Dictionary of International Trade (eighth ed.). World Trade Press. p. 563. ISBN 978-80-7399-759-5. 
  137. ^ Richter, Frank (2005). The Renaissance of the Railroad: A Chronicle of the Transformation of the Century. Bloomington, IN: AuthorHouse. p. 111. ISBN 1-4184-9705-3. 
  138. ^ "Railroad Slanguage Glossary". Railway Life (Buffalo, Rochester and Pittsburgh Railroad). 1931. Retrieved 2008-01-25. 
  139. ^ Petersen, Richard A. (30 September 2003). Hogger: From Fantasy to Fulfillment: A Locomotive Engineer Remembers. iUniverse. ISBN 0-595-65934-9. 
  140. ^ Gertler, Judith B.; Acton, Sarah (2003). Railroad dispatcher communications training materials. United States Federal Railroad Administration, Office of Research and Development. p. 24. 
  141. ^ Graham, John Hector (February 10, 1903). "Paper by John Hector Graham". New England Railroad Club (Boston, MA): 34–65. 
  142. ^ "Locomotive Journals and Bearings". The Railway Engineer XXIX (345): 320–321. October 1908. 
  143. ^ "hostling". Merriam-Webster (2014 ed.). 2014. Retrieved 2014-10-11. 
  144. ^ "Hotbox". The Hotbox (North Central Region National Model Railroad Association). Archived from the original on 7 January 2008. Retrieved 2008-01-24. 
  145. ^ US 4659043 
  146. ^ "Part 92—Control of Air Pollution from Locomotives and Locomotive Engines". The Code of Federal Regulations of the United States of America. United States Office of the Federal Register. p. 405. 
  147. ^ Bragg, J. B. American Drifters. Lulu.com. ISBN 9780557846429. 
  148. ^ Ehrenreich-Risner, V. (2010). North Sacramento. Images of America. Arcadia Pubilshing. p. 61. ISBN 978-0-7385-8003-6. 
  149. ^ Railroad Research Bulletin 172 (3): 229. February 1972. 
  150. ^ Brill, Debra (2001). History of the J.G. Brill Company. Bloomington, IN: Indiana University Press. p. 187. ISBN 0-253-33949-9. 
  151. ^ Green, Jonathon (2005) [first edition published 1998]. Cassell's Dictionary of Slang (second ed.). London: Weidenfeld & Nicolson. p. 747. ISBN 0-304-366366. 
  152. ^ "Highball on a "hot shot" (advertisement for Corby's Whiskey)". Life Magazine 22 (8): 74. February 24, 1947. 
  153. ^ Orr, John W. (2001). Set Up Running: The Life of a Pennsylvania Railroad Engineman, 1904-1949. University Park, PA: Pennsylvania State University Press. p. 140. ISBN 0-271-02056-3. 
  154. ^ Solomon, Brian (2009). Alco Locomotives. MBI Publishing Company. p. 52. 
  155. ^ Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. MBI Publishing Company. p. 6. ISBN 9781610586856. 
  156. ^ 1000 Practical Air Brake Questions and Answers for Railroad Men. Lasrobe, PA: Walter's Print. 1913. 
  157. ^ Boyd, Jim (2001). The American Freight Train. MBI Publishing Company. p. 27. ISBN 9780760308332. 
  158. ^ a b c d "Railroading Glossary: I". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  159. ^ Loumiet, James R.; Jungbauer, William G.; Abrams, Bernard S. (2005). Train Accident Reconstruction and FELA and Railroad Litigation (fourth ed.). Tucson, AZ: Lawyers & Judges Publishing Company. p. 62. ISBN 978-1-930056-93-0. 
  160. ^ "3.16: Insulated Rail Joints". Railway Track Engineering (fourth ed.). New Delhi, India: Tata McGraw Hill Education Private Ltd. 2010 [first edition published 2000]. p. 86. ISBN 978-0-07-068012-8. 
  161. ^ Koester, Tony (2004). Realistic Model Railroad Design. Waukesha, WI: Kalmbach Publishing. p. 73. ISBN 0-89024-581-9. 
  162. ^ Hartong, Mark; Goel, Rajni; Wijesekera, Duminda (2009). "14: Secure Cross-Domain Train Scheduling". Critical Infrastructure Protection III: Third IFIP WG 11.10 International Conference, Hanover, New Hampshire, USA, March 23-25, 2009, Revised Selected Papers. Springer Science & Business Media. pp. 199–211. ISBN 9783642047978. 
  163. ^ Gamst, Frederick C. (1980). The Hoghead: An Industrial Ethnology of the Locomotive Engineer. Holt, Rinehart and Winston. p. 96. ISBN 9780030526367. 
  164. ^ Proceedings. Railway Fuel and Operating Officers Association. 1966. pp. 72 and 92. 
  165. ^ a b c "Railroading Glossary: J". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  166. ^ Union Pacific Railroad. "Fun Facts". Retrieved 2007-03-05. 
  167. ^ a b "Railroad Dictionary: J". CSX.com. CSX Corporation. 2012. Retrieved 2014-11-15. 
  168. ^ "Dictionary of Car and Locomotive Terms". Car and Locomotive Encyclopedia. Simmons-Boardman Publishing. 1970. 
  169. ^ Sanders, Craig (2014). Cleveland Mainline Railroads. Images of Rail. Charleston, SC: Arcadia Publishing. p. 12. ISBN 978-1-4671-1137-9. 
  170. ^ Technical Manual TM 5-370: Railroad Construction. United States Department of the Army. September 1970. p. Glossary 6. 
  171. ^ The Code of Federal Regulations of the United States of America - 49: Transportation. Office of the Federal Register, National Archives and Records Administration. October 2006. p. 115. 
  172. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 187. ISBN 978-1-84728-643-7. 
  173. ^ "Taking Chances". Railroad Men. XVIII (12): 460. September 1905. 
  174. ^ Bibel, George (2012). Train Wreck: The Forensics of Rail Disasters. Baltimore, MD: Johns Hopkins University Press. pp. 145–146. ISBN 978-1-4214-0590-2. 
  175. ^ Simon Iwnicki, ed. (2006). Handbook of Railway Vehicle Dynamics. Boca Raton, FL: CRC Press. p. 184. ISBN 0-8493-3321-0. 
  176. ^ "Another Reply by the Signal Engineer". The Signal Engineer (Chicago: Simmons-Boardman Publishing Co.) 5 (9): 305–306. September 15, 1912. 
  177. ^ US patent 936046, Schroeder, William S., "car-coupling", issued 1909-10-05 
  178. ^ Cunningham, William A. (1997). The Railroad Lantern, 1865 to 1930: The Evolution of the Railroad Hand Lantern as Reflected by the United States Patent Records and by Lanterns Made by Cross, Dane & Westlake, Dane, Westlake & Covert, the Adams & Westlake Manufacturing Co. & the Adams & Westlake Company. Wm. A. Cunningham. 
  179. ^ Thomas J. Michie, ed. (1913). "MacKenzie v. New York Cent. & H. R. R. Co.". Railroad Reports: A collection of all cases affecting railroads of every kind, decided by the courts of last resort in the United States 67. Charlottesville, VA: The Michie Company. pp. 315–316. 
  180. ^ a b "Railroading Glossary: L". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-26. Retrieved 2013-02-20. 
  181. ^ "What is Light Rail?". LRTA.org. Light Rail Transit Association. Retrieved 2009-07-06. 
  182. ^ Grutzik, Joe (2005). Adventure Lessons: Teachings of an Existential Vagabond. Los Angeles, CA: Good & Brown Publishers. p. 34. ISBN 0-9768915-1-4. 
  183. ^ Glazier, Stephen (1998). Random House Webster's word menu. Random House. p. 212. ISBN 9780375700835. 
  184. ^ Tom Dalzell and Terry Victor, ed. (2006). The New Partridge Dictionary of Slang and Unconventional English. II: J-Z. New York: Routledge. p. 1295. ISBN 0-415-25938-X. 
  185. ^ a b World Book Dictionary. Chicago: World Book, Inc. 2003. p. 1318. ISBN 0-7166-0299-7. 
  186. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 204. ISBN 978-1-84728-643-7. 
  187. ^ Toft, Guy (July 1913). "Signaling of the Union R. R. of Baltimore". The Signal Engineer (Chicago: Simmons-Boardman Publishing Co.) 8 (7): 197–200. 
  188. ^ Elliott, W. H. (January 1906). "Signaling". Railroad Men XIX (4): 128–137. 
  189. ^ Solomon, Brian (2003). Railroad Signaling. MBI Publishing Company. p. 48. 
  190. ^ Operation and Maintenance of Diesel-Electric Locomotives. United States Departments of the Army and the Air Force. October 1965. p. 77. 
  191. ^ a b c d e "Railroading Glossary: M". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-21. Retrieved 2013-02-20. 
  192. ^ Fowler, George L. (2008). Locomotive Dictionary 1. Lulu.com. pp. 55 and 65. ISBN 9781935327615. 
  193. ^ Locomotive Cyclopedia of American Practice (sixth ed.). New York: Simmons-Boardman Publishing Co. 1922. pp. 102–103. 
  194. ^ Bedwell, Harry (2006) [first published 1936]. The Boomer: A Story of the Rails. Minneapolis, MN: First University of Minnesota Press. p. 322. 
  195. ^ Green, Jonathon (2005) [first edition published 1998]. Cassell's Dictionary of Slang (second ed.). London: Weidenfeld & Nicolson. p. 923. ISBN 0-304-366366. 
  196. ^ Bianculli, Anthony J. (2003). Trains and Technology: The American Railroad in the Nineteenth Century. 4: Bridges and Tunnels, Signals. Rosemont Publishing & Printing Corp., Associated University Presses. p. 172. ISBN 0-87413-803-5. 
  197. ^ Braman B. Adams and Rodney Hitt, ed. (1908). The Railroad Signal Dictionary (first ed.). Chicago: Railroad Age Gazette. 
  198. ^ James, W. P. (2008) [first edition published 1916]. "Mikado Type Locomotives". Locomotive Engineman's Manual (fifteenth ed.). Periscope Film. pp. 24–27. 
  199. ^ White (1968), p 62-65.
  200. ^ Semmens, P.W.B.; Goldfinch, A.J. (2000). How Steam Locomotives Really Work. Oxford: Oxford University Press. pp. 177–185. ISBN 978-0-19-860782-3. 
  201. ^ "4-8-2 Locomotives". Locomotive Cyclopedia of American Practice. American Railway Master Mechanics' Association. pp. 192–206. ISBN 9785874485672. 
  202. ^ Roy V. Wright and Charles N, Winter, ed. (1922). Locomotive Cyclopedia of American Practice (sixth ed.). New York: Simmons-Boardman Publishing Co. pp. 46 and 62. 
  203. ^ Duffy, Michael C. (2008) [first edition published 2003]. Electric Railways 1880-1990. History of Technology. Stevenage, UK: The Institution of Engineering and Technology. pp. 191–193. ISBN 978-0-85296-805-5. 
  204. ^ "Railroading Glossary: N". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-22. Retrieved 2013-02-20. 
  205. ^ Solomon, Brian (2012). North American Locomotives: A Railroad-by-Railroad Photohistory. MBI Publishing Company. p. 6. ISBN 9781610586856. 
  206. ^ Glischinski, Steve (1997). Santa Fe Railway. Railroad Color History. Andover Junction Publishing. p. 104. ISBN 0-7603-0380-0. 
  207. ^ Wilson, Jeff (2009). The Model Railroader's Guide to Diesel Locomotives. Waukesha, WI: Kalmbach Publishing. p. 15. ISBN 978-0-89024-761-7. 
  208. ^ Loumiet, James R.; jungbauer, William G. (2005). Train Accident Reconstruction and FELA and Railroad Litigation (fourth ed.). Tucson, AZ: Lawyers & Judges Publishing Co. p. 226. ISBN 978-1-930056-93-0. 
  209. ^ "Railroading Glossary: O". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  210. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 46. ISBN 978-1-84728-643-7. 
  211. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. pp. 246 and 326. ISBN 978-1-84728-643-7. 
  212. ^ Henry Harrison Suplee, B.Sc.; J.H. Cuntz, C.E., M.E.; and Charles Buxton Going, Ph.B., ed. (1906). The Engineering Index. IV: 1901-1905. New York and London: The Engineering Magazine. p. 714. 
  213. ^ a b c d e "Railroading Glossary: P". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  214. ^ Hay, William Walter (1982). Railroad Engineering. John Wiley & Sons, Inc. pp. 134–135. ISBN 0-471-36400-2. 
  215. ^ Treese, Lorett (2003). Railroads of Pennsylvania: Fragments of the Past in the Keystone Landscape. Mechanicsburg, PA: Stackpole Books. p. 5. ISBN 0-8117-2622-3. 
  216. ^ Arbitration Cases No. 1 - No. 61; Decided by the Per Diem Rules Arbitration Committee. New York: The American Railway Association. June 1913. 
  217. ^ Publication 1194-B: A Selection of ... Internal Revenue Service Tax Information Publications 2. United States Internal Revenue Service. 2000. p. 247. 
  218. ^ "Locomotive Engineers Journal" 56 (2). Des Moines, IA: Brotherhood of Locomotive Engineers. February 1922. p. 197. 
  219. ^ Weiser, Eugene (2013). The Pennsylvania Railroad: A Brief Look in Time. The History of the American Railroads. Seaford, DE: Dragonwick Publishing. pp. 30–31. ISBN 978-1300640783. 
  220. ^ Solomon, Brian (2003). Railroad Signaling. MBI Publishing Company. p. 103. 
  221. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 259. ISBN 978-1-84728-643-7. 
  222. ^ Hyman, Anthony (1982). Charles Babbage, Pioneer of the Computer. Oxford University Press. pp. 142–143. ISBN 0-19-858170-X. "Babbage suggested to Hodgson of the railway company what was later to be called a 'cow-catcher' for sweeping obstacles off the line." 
  223. ^ 1980 Census of Population: Classified Index of Industries and Occupations. United States Department of Commerce, Bureau of the Census. November 1982. p. O-143. 
  224. ^ United States National Railroad Adjustment Board. Awards ... First Division, National Railroad Adjustment Board. Washington, DC: U.S. Government Printing Office. p. 83. 
  225. ^ a b Hawkins, Nehemiah (1909). Hawkins' mechanical dictionary. New York and London: Theodore Audel & Co. Publishers. p. 400. 
  226. ^ "§ 232.219: Double heading and helper service". The Code of Federal Regulations of the United States of America - 49: Transportation; 49 CFR 200.1. October 2007. p. 597. ISBN 9781577858614. 
  227. ^ The Encyclopaedic Dictionary. 5, part 2. London, Paris, New York & Melbourne: Cassell & Co., Ltd. 1886. p. 519. 
  228. ^ Ogilvie, LL.D., John (1883). Charles Annandale, M.A., ed. The Imperial Dictionary of the English Language. III: L-Screak. London: Blackie & Son. p. 445. 
  229. ^ White (1968), p 207-208.
  230. ^ Shade, Howard Milton (January 25, 1917). "Piston Travel". What Railroad Men Should Know. pp. 96–97. 
  231. ^ American Public Transportation Association (March 26, 1998). "APTA PR-CS-RP-003-98 Recommended Practice for Developing a Clearance Diagram for Passenger Equipment". Retrieved October 16, 2014. 
  232. ^ White (1968), p 174.
  233. ^ Wilson, Jeff (2009). The Model Railroader's Guide to Diesel Locomotives. Waukesha, WI: Kalmbach Publishing. p. 48. ISBN 978-0-89024-761-7. 
  234. ^ "The Potential for Increased On-Rail Competition". Renaissance Trains/Office of Rail Regulation UK. Retrieved 15 February 2013. 
  235. ^ "Further written evidence from Jonathan Tyler, Passenger Transport Networks (HSR 138A)". House of Commons. Retrieved 15 February 2013. 
  236. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 269. ISBN 978-1-84728-643-7. OCLC 683418325. 
  237. ^ Loumiet, James R.; Jungbauer, William G. (2005). Train Accident Reconstruction and FELA and Railroad Litigation (fourth ed.). Tucson, AZ: Lawyers & Judges Publishing Co. p. 42. ISBN 978-1-930056-93-0. 
  238. ^ Simon Iwnicki, ed. (2006). Handbook of Railway Vehicle Dynamics. Boca Raton, FL: CRC Press. pp. 240–241. ISBN 0-8493-3321-0. 
  239. ^ Locomotive Cyclopedia of American Practice. American Railway Master Mechanics' Association. p. 102. ISBN 9785874485672. 
  240. ^ "Railway Track and Structures" 92. Simmons-Boardman Publishing Corporation. 1996. p. 27. 
  241. ^ McCulloch, David S.; Bonilla, Manuel G. (1970). The Alaska Earthquake, March 27, 1964: Effects on Transportation and Utilities. Geological Survey Professional Paper. Washington, DC: United States Government Printing Office. p. D135. 
  242. ^ Special to The New York Times. (26 June 1920). "1 Killed, 20 Hurt in Jersey Wreck; Freight Car Jumps Rails and Rips Sides of Passenger Cars at Stevens. Fire Follows Collision Edward Lawrence of Bordentown, Brakeman, Crushed Between Freight Car and Coach." (PDF). Retrieved 2008-10-05. 
  243. ^ Division of the Federal Register, National Archives and Records Administration (1949). The Code of Federal Regulations of the United States of America - Title 49: Transportation; parts 91 to 164. Washington, DC: United States Government Printing Office. p. 63. 
  244. ^ "Subpart C: Exceptions to the Use of the Locomotive Horn". The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: United States Government Printing Office. October 1, 2009. pp. 299–318. 
  245. ^ Thompson, David (2009). Railway Noise and Vibration: Mechanisms, Modelling and Means of Control (first ed.). Oxford: Linacre House. p. 8. ISBN 978-0-08-045147-3. 
  246. ^ a b "railway line". The Free Dictionary. Retrieved October 19, 2014. 
  247. ^ AFP (October 17, 2014). "China, Russia mull high-speed Moscow-Beijing rail line: report". Yahoo News. Retrieved October 19, 2014. 
  248. ^ "China to build new East Africa railway line". BBC News. May 12, 2014. Retrieved October 19, 2014. 
  249. ^ "Named Railway Lines". National Rail Enquiries. Retrieved October 19, 2014. 
  250. ^ "Rail Lines (total route-km)". The World Bank. Retrieved October 19, 2014. 
  251. ^ JR East Group (March 16, 2013). "Railway Lines Network". Retrieved October 19, 2014. 
  252. ^ "rake". Oxford Dictionaries. Oxford University Press. Retrieved October 19, 2014. 
  253. ^ Network Rail. "Rake". Safety Central: Jargon Buster. Retrieved October 19, 2014. 
  254. ^ Network Rail. "Red Zone Working". Safety Central: Jargon Buster. Retrieved October 19, 2014. 
  255. ^ CSX Transportation. "CSX Safety Requirements for Corridor Activity". Retrieved October 19, 2014. 
  256. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 292. ISBN 978-1-84728-643-7. 
  257. ^ Barry, Steve (2008). Railroad Rolling Stock. Minneapolis, MN: Voyageur Press, an imprint of MBI Publishing Company. p. 71. ISBN 978-0-7603-3260-3. 
  258. ^ "History of this "Rent a Wreck"". Trainorders. 13 September 2006. Retrieved 2008-01-25. 
  259. ^ a b c d "Railroading Glossary: R". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-09-13. Retrieved 2013-02-20. 
  260. ^ "Guide for Railroads". Association of American Railroads. May 30, 2013. Retrieved October 19, 2014. 
  261. ^ "Understanding railroad reporting marks". Trains Magazine. Waukesha, WI: Kalmbach Publishing. May 1, 2006. Retrieved October 19, 2014. 
  262. ^ Skrabec, Jr., Quentin R. (2007). George Westinghouse: Gentle Genius. Algora Publishing. p. 34. ISBN 978-0-87586-507-2. 
  263. ^ Phillips, Jr., E.E., M.B.A., Edmund J. (1942). Railroad Operation and Railway Signaling. Chicago: Simmons-Boardman Publishing Co. p. 17. 
  264. ^ Solomon, Brian (2006). Working on the Railroad. St. Paul, MN: Voyageur Press, an imprint of MBI Publishing Company. p. 156. ISBN 0-7603-2220-1. 
  265. ^ "Safety at the Switches". Popular Science Monthly (New York: Popular Science Publishing Co.) 107 (4): 38. October 1925. 
  266. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 300. ISBN 978-1-84728-643-7. 
  267. ^ Shull, Peter J. (2002). "3.5.1 Roll-by Inspection of Railroad Wheels". Nondestructive Evaluation: Theory, Techniques, and Applications. New York: Marcel Dekker, Inc. pp. 161–167. ISBN 0-8247-8872-9. 
  268. ^ "232.5 Definitions". The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: Office of the Federal Register, National Archives and Records Administration. October 1, 2003. pp. 441–443. 
  269. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 302. ISBN 978-1-84728-643-7. 
  270. ^ Internal Revenue Code: §§1-860G 1. United States Internal Revenue Service. July 1, 2007. p. 1067. ISBN 978-0-8080-1684-7. 
  271. ^ "§1.48-1 Definition of section 38 property". The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: Office of the Federal Register, National Archives and Records Administration. April 1, 2003. pp. 321–330. 
  272. ^ Scribbins, Jim (2008) [first published 1990]. Milwaukee Road Remembered. Fesler-Lempert Minnesota Heritage Book Series (University of Minnesota Press ed.). Kalmbach Publishing. p. 115. ISBN 978-0-8166-5625-7. 
  273. ^ Jameson, C. D.; Forney, M. N. (July 1888). "The Principles of Railroad Location". The Railroad and Engineering Journal (New York) LXII (7): 297–301. 
  274. ^ "Catching a Runaway Engine". Railroad Men XVII (4): 141–142. January 1904. 
  275. ^ Railroad Design and Construction at Army and Air Force Installations. Washington, DC: United States Departments of the Army and the Air Force. July 1980. p. 2. 
  276. ^ Niemann, Linda G. (2010). Railroad Noir: The American West at the End of the Twentieth Century. Bloomington, IN: Indiana University Press. p. 151. ISBN 978-0-253-35446-4. 
  277. ^ R.L. Banks & Associates (1977). Study of merger alternatives: run-through trains: a report to the Rail Services Planning Office, Interstate Commerce Commission. Interstate Commerce Commission, Rail Services Planning Office. 
  278. ^ a b c d e f g h i j k l m n o p "Railroading Glossary: S". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-21. Retrieved 2013-02-20. 
  279. ^ Macfarlane, Ian (2002). Railway Safety: Block Safeworking. Engineers Australia. ISBN 9780858258266. 
  280. ^ "Baldwin Locomotives and the Santa Fe "Power" Supremacy". The Santa Fe Magazine (Chicago: Atchison, Topeka and Santa Fe Railroad) XVII (2): 131–133. January 1923. 
  281. ^ Roy V. Wright and Charles N. Winter, ed. (1922). Locomotive Cyclopedia of American Practice (sixth ed.). New York: Simmons-Boardman Publishing Co. pp. 137–148. 
  282. ^ The Code of Federal Regulations of the United States of America - 49: Transportation. Washington, DC: Office of the Federal Register, National Archives and Records Administration. October 1, 2012. p. 543. 
  283. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 322. ISBN 978-1-84728-643-7. 
  284. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 341. ISBN 978-1-84728-643-7. 
  285. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 336. ISBN 978-1-84728-643-7. 
  286. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 339. ISBN 978-1-84728-643-7. 
  287. ^ a b "Railway Operations - I". IRFCA.org. Indian Railways Fan Club. 2010. Retrieved 2014-10-15. 
  288. ^ White (1968), p 114-122.
  289. ^ "Rotary Snow Plow". RailFame.ca. Canadian Railway Hall of Fame. 2006. Retrieved 2008-10-03. 
  290. ^ Dysgraphyk; Aitken (1 February 2008). "scot-rail.co.uk » Snow ploughs". Scot-Rail.co.uk. Retrieved 2008-10-03. 
  291. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 341. ISBN 978-1-84728-643-7. 
  292. ^ "FAQ's & Answers". NARCOA. Retrieved 2008-01-25. 
  293. ^ "ICF rolls out prototype cars to test rails". The Hindu Business Line (The Hindu Group). 2 October 2005. Retrieved 2008-01-30. 
  294. ^ a b c d e f g h "Railroading Glossary: T". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-22. Retrieved 2013-02-20. 
  295. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 373. ISBN 978-1-84728-643-7. 
  296. ^ Judicial and statutory definitions of words and phrases. Second series West Publishing Company - St. Paul, Minnesota - 1914
  297. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 377. ISBN 978-1-84728-643-7. 
  298. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 395. ISBN 978-1-84728-643-7. 
  299. ^ Ellis, Iain (2006). Ellis' British Railway Engineering Encyclopaedia. Lulu.com. p. 408. ISBN 978-1-84728-643-7. 
  300. ^ "Railroading Glossary: U". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-30. Retrieved 2013-02-20. 
  301. ^ "Unit train". Encyclopædia Britannica. 2014. 
  302. ^ "Company Overview". UP.com. Union Pacific Corporation. 31 December 2013. Retrieved 27 March 2014. 
  303. ^ "Valve Gears". Handbook for Railway Steam Locomotive Enginemen (1st (softback) ed.). Hersham, Surrey: Ian Allan Publishing. 2014 [1957, British Transport Commission]. p. 98. ISBN 978-0-7110-3794-6. OCLC 866583611. 
  304. ^ a b c d "Railroading Glossary: W". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-30. Retrieved 2013-02-20. 
  305. ^ "Railroading Glossary: Y". TRN.Trains.com. Kalmbach Publishing. Archived from the original on 2014-08-22. Retrieved 2013-02-20. 

Further reading[edit]

  • Canadian National Railways: Linguistic Services. Freight Car Inspection & Maintenance: English-French Vocabulary = Surveillance et entretien des wagons: vocabulaire anglais-français. Montréal: Canadian National Railways, 1973. Without ISBN or SBN

External links[edit]