Stokes flow (named after George Gabriel Stokes), also named creeping flow or creeping motion, is a type of fluid flow where advective inertial forces are small compared with viscous forces. The Reynolds number is low, i.e. . This is a typical situation in flows where the fluid velocities are very slow, the viscosities are very large, or the length-scales of the flow are very small. Creeping flow was first studied to understand lubrication. In nature this type of flow occurs in the swimming of microorganisms and sperm and the flow of lava. In technology, it occurs in paint, MEMS devices, and in the flow of viscous polymers generally.
The equations of motion for Stokes flow, called the Stokes Equations, are a linearization of the Navier-Stokes Equations, and thus can be solved by a number of well-known methods for linear differential equations. The primary Green's function of Stokes flow is the Stokeslet, which is associated with a singular point force embedded in a Stokes flow. From its derivatives other fundamental solutions can be obtained.
The fundamental solution due to a point force in a steady Stokes flow was first derived by the Nobel Laureate, Lorentz, as far back as 1896. This solution is now known by the name Stokeslet, although Stokes never knew about it. The name Stokeslet was coined by Hancock in 1953. Obviously, Hancock was unaware of this Lorentz’s work. Had he known about it, he might have opted for Lorentzlet instead of Stokeslet. The closed-form fundamental solutions for generalized unsteady Stokes and Oseen flows associated with arbitrary time-dependent translational and rotational motions have been derived for Newtonian and micropolar fluids.
- 1 Stokes equations
- 2 Incompressible flow of Newtonian fluids
- 2.1 Cartesian coordinates
- 2.2 Methods of solution
- 2.3 Stokes flow in particular geometries
- 2.4 Theorems about Stokes flow
- 3 See also
- 4 References
- 5 External links
|This section may be confusing or unclear to readers. In particular, the second sentence in this section does not make logical/grammatical sense. (June 2014)|
The equation of motion for Stokes flow can be obtained by linearizing the steady state Navier-Stokes Equations. The inertial forces are assumed to be negligible compared with the viscous forces, this reduces the momentum balance in the Navier–Stokes equations to the momentum balance in the Stokes equations:
where is the Cauchy stress tensor representing viscous and pressure stresses, and an applied body force. The full Stokes equations also include an equation for the conservation of mass, commonly written in the form:
Where is the fluid density and the fluid velocity. To obtain the equations of motion for incompressible flow, it is assumed that the density, , is a constant.
Furthermore, occasionally one might consider the unsteady Stokes equations, in which the term is added to the left hand side of the momentum balance equation.
The Stokes equations represent a considerable simplification of the full Navier–Stokes equations, especially in the incompressible Newtonian case. They are the leading-order simplification of the full Navier–Stokes equations, valid in the distinguished limit
- A Stokes flow has no dependence on time other than through time-dependent boundary conditions. This means that, given the boundary conditions of a Stokes flow, the flow can be found without knowledge of the flow at any other time.
- An immediate consequence of instantaneity, time-reversibility means then a time-reversed Stokes flow solves the same equations as the original Stokes flow. This property can sometimes be used (in conjunction with linearity and symmetry in the boundary conditions) to derive results about a flow without solving it fully. Time reversibility means that it is difficult to mix two fluids using creeping flow.
While these properties are true for incompressible Newtonian Stokes flows, the non-linear and sometimes time-dependent nature of non-Newtonian fluids means that they do not hold in the more general case.
- Stokes paradox
An interesting property of Stokes flow is known as the Stokes' paradox: that there can be no Stokes flow of a fluid around a disk in two dimensions; or, equivalently, the fact there is no non-trivial solution for the Stokes equations around an infinitely long cylinder.
Demonstration of time-reversibility
A Taylor–Couette system can create spiral laminar flows. Two fluids with very different viscosities (and therefore a very low Reynolds number) create spiral laminar flows which can then be reversed to approximately the initial state. This creates a dramatic demonstration of seemingly mixing two fluids and then unmixing them by reversing the direction of the mixer.
Incompressible flow of Newtonian fluids
In the common case of an incompressible Newtonian fluid, the Stokes equations take the (vectorized) form:
Where is the velocity of the fluid, is the gradient of the pressure, is the dynamic viscosity, and an applied body force. The resulting equations are linear in velocity and pressure, and therefore can take advantage of a variety of linear differential equation solvers.
With the velocity vector expanded as and similarly the body force vector , we may write the vector equation explicitly,
We arrive at theses equations by making the assumptions that and the density is a constant.
Methods of solution
By stream function
The equation for an incompressible Newtonian Stokes flow can be solved by the stream function method in planar or in 3-D axisymmetric cases
|Type of function||Geometry||Equation||Comments|
|Stream function||2-D planar||or (biharmonic equation)||is the Laplacian operator in two dimensions|
|Stokes stream function||3-D spherical||where||For derivation of the operator see Stokes stream function#Vorticity|
|Stokes stream function||3-D cylindrical||where||For see |
By Green's function: the Stokeslet
The linearity of the Stokes equations in the case of an incompressible Newtonian fluid means that a Green's function, , exists. The Green's function is found by solving the Stokes equations with the forcing term replaced by a point force acting at the origin, and boundary conditions vanishing at infinity:
The terms Stokeslet and point-force solution are used to describe . Analogous to the point charge in Electrostatics, the Stokeslet is force-free everywhere except at the origin, where it contains a force of strength .
For a continuous-force distribution (density) the solution (again vanishing at infinity) can then be constructed by superposition:
This integral representation of the velocity can be viewed as a reduction in dimensionality: from the three-dimensional partial differential equation to a two-dimensional integral equation for unknown densities.
By Papkovich–Neuber solution
By boundary element method
Certain problems, such as the evolution of the shape of a bubble in a Stokes flow, are conducive to numerical solution by the boundary element method. This technique can be applied to both 2- and 3-dimensional flows.
Stokes flow in particular geometries
Hele-Shaw flow is an example of a geometry for which inertia forces are negligible. It is defined by two parallel plates arranged very close together with the space between the plates occupied partly by fluid and partly by obstacles in the form of cylinders with generators normal to the plates.
Slender-body theory in Stokes flow is a simple approximate method of determining the irrotational flow field around bodies whose length is large compared with their width. The basis of the method is to choose a distribution of flow singularities along a line (since the body is slender) so that their irrotational flow in combination with a uniform stream approximately satisfies the zero normal velocity condition.
Lamb's solution in spherical coordinates
Lamb's general solution arises from the fact that the pressure satisfies the Laplace equation, and can be expanded in a series of solid spherical harmonics in spherical coordinates. As a result the solution to the Stokes equations can be written:
where and are solid spherical harmonics of order :
and the are the associated Legendre polynomials. The Lamb's solution can be used to describe the motion of fluid either inside or outside a sphere. For example, it can be used to describe the motion of fluid around a solid spherical particle, or to describe the flow inside a spherical drop of fluid. For interior flows, the terms with are dropped, while for exterior flows the terms with are dropped (often the convention is assumed for exterior flows to avoid indexing by negative numbers).
Theorems about Stokes flow
Stokes' Law (Stokes' Drag)
The Stokes' law for the resistance to a moving sphere, also known as Stokes' drag, is a relation describing the drag force on a sphere exerted by the surrounding fluid in a Stokes flow. Given a sphere of radius , travelling at velocity , in a Stokes fluid with dynamic viscosity , the drag force is given by:
Minimum Energy Dissipation Theorem
Lorentz Reciprocal Theorem
The Lorentz Reciprocal Theorem states a relationship between two Stokes flows in the same region. Consider fluid filled region bounded by surface . Let the velocity fields and solve the Stokes equations in the domain , each with corresponding stress fields and . Then the following equality holds:
Where is the unit normal on the surface . The Lorentz Reciprocal theorem can be used to show that Stokes flow "transmits" unchanged the total force and torque from an inner closed surface to an outer enclosing surface. The Lorentz Reciprocal theorem can also be used to relate the swimming speed of a microorganism, such as cyanobacterium, to the surface velocity which is prescribed by deformations of the body shape via cilia or flagella.
The Faxén's laws are direct relations that express the multipole moments in terms of the ambient flow and its derivatives. First developed by Hilding Faxén to calculate the force, , and torque, on a sphere, they took the following form:
where is the dynamic viscosity, is thee particle radius, is the ambient flow, is the speed of the particle, is the angular velocity of the background flow, and is the angular velocity of the particle.
The Faxén's laws can be generalized to describe the moments of other shapes, such as ellipsoids, spheroids, and spherical drops.
- Kim, S. & Karrila, S. J. (2005) Microhydrodynamics: Principles and Selected Applications, Dover. ISBN 0-486-44219-5.
- Kirby, B.J. (2010). Micro- and Nanoscale Fluid Mechanics: Transport in Microfluidic Devices.. Cambridge University Press. ISBN 978-0-521-11903-0.
- Dusenbery, David B. (2009). Living at Micro Scale. Harvard University Press, Cambridge, Mass. ISBN 978-0-674-03116-6.
- Leal, L.G. (2007). Advanced Transport Phenomena:Fluid Mechanics and Convective Transport Processes.
- Chwang, A. and Wu, T. (1974). "Hydromechanics of low-Reynolds-number flow. Part 2. Singularity method for Stokes flows". J. Fluid Mech. 62(6), part 4, 787–815.
- Shu, Jian-Jun; Chwang, A.T. (2001). "Generalized fundamental solutions for unsteady viscous flows". Physical Review E 63 (5): 051201. arXiv:1403.3247. Bibcode:2001PhRvE..63e1201S. doi:10.1103/PhysRevE.63.051201.
- Shu, Jian-Jun; Lee, J.S. (2008). "Fundamental solutions for micropolar fluids". Journal of Engineering Mathematics 61 (1): 69–79. arXiv:1402.5023. Bibcode:2008JEnMa..61...69S. doi:10.1007/s10665-007-9160-8.
- Batchelor, G. K. (2000). Introduction to Fluid Mechanics.
- Happel, J. & Brenner, H. (1981) Low Reynolds Number Hydrodynamics, Springer. ISBN 90-01-37115-9.
- Lamb, Horace (1945). Hydrodynamics (Sixth ed.). New York: Dover Publications. pp. 602–604.
- C. David Andereck, S. S. Liu and Harry L. Swinney (1986). Flow regimes in a circular Couette system with independently rotating cylinders. Journal of Fluid Mechanics, 164, pp 155–183 doi:10.1017/S0022112086002513
- Dusenbery, David B. (2009). Living at Micro Scale, pp.46. Harvard University Press, Cambridge, Mass. ISBN 978-0-674-03116-6.
- Payne, LE; WH Pell (1960). "The Stokes flow problem for a class of axially symmetric bodies". Journal of Fluid Mechanics 7 (04): 529–549. Bibcode:1960JFM.....7..529P. doi:10.1017/S002211206000027X.
- Stone, Howard A.; Samuel, Aravinthan D. T. (November 1996). "Propulsion of Microorganisms by Surface Distorsions". Physical Review Letters. 19 77: 4102–4104. Bibcode:1996PhRvL..77.4102S. doi:10.1103/PhysRevLett.77.4102.
- Ockendon, H. & Ockendon J. R. (1995) Viscous Flow, Cambridge University Press. ISBN 0-521-45881-1.
- Video demonstration of time-reversibility of Stokes flow by UNM Physics and Astronomy