Joy valve gear

From Wikipedia, the free encyclopedia
  (Redirected from David Joy (engineer))
Jump to: navigation, search
Joy Valve Gear Diagram

Joy valve gear is a type of steam locomotive valve gear, designed by David Joy (1825–1903), Locomotive and Marine engineer, and patented in 1870. The movement is derived from a vertical link connected to the connecting rod. The vertical movement is translated into the horizontal movement required by the valve spindle by a die block moving in a slide which can be varied in inclination. The necessary 90 degree phase shift is obtained not from an eccentric, as with most designs, but from both the nominal 90 degree difference of the "vertical" link with respect to the horizontal connecting rod and the 90 degree phase difference between the horizontal and vertical components of the motion of the connecting rod.

Applications[edit]

Joy's valve-gear was used extensively on Lancashire and Yorkshire Railway and London and North Western Railway locomotives, and also on the Manning Wardle-built narrow gauge 2-6-2 locomotives of the Lynton and Barnstaple Railway. Joy gear was also used by John Fowler & Co. and several other steam traction engine manufacturers. The most numerous locomotive class using Joy valve gear was Russian O class, in Od and OD variants (over 4500 built) - a letter "d" / "D" in their designations stood for Joy (in Russian phonetically: Джой - Dzhoy).[1] Joy's valve gear was used in the Doble steam car until replaced by Stephenson's valve gear.

Preservation[edit]

The last locomotives with Joy valve gear to remain in service with British Railways were the LNWR G2 and G2A classes, one of which is preserved.

References[edit]

  1. ^ Rakov, V.A. (1995), Lokomotivy otechestvennyh zheleznyh dorog 1845-1955, Moscow, ISBN 5-277-00821-7, p.143-145 (in Russian)

External links[edit]