SI derived unit

The International System of Units (SI) specifies a set of seven base units from which all other units of measurement are formed, by products of the powers of base units. These other units are called SI derived units; for example, the SI derived unit of area is square metre (m²), and of density is kilograms per cubic metre (kg/m³). The number of derived units is unlimited.

The names of SI units are always written in lowercase. The symbols of units named after persons, however, are always written with an uppercase initial letter (e.g. the symbol of hertz is Hz; but metre is m).

Derived units with special names

In addition to the two dimensionless derived units radian (rad) and steradian (sr), 20 other derived units have special names.

Named units derived from SI base units

Name	Symbol	Quantity	Equivalents	SI base unit Equivalents
hertz	Hz	frequency	1/s	s−1
radian	rad	angle	m/m	dimensionless
steradian	sr	solid angle	m2/m2	dimensionless
newton	N	force, weight	kg⋅m/s2	kg⋅m⋅s−2
pascal	Pa	pressure, stress	N/m2	kg⋅m−1⋅s−2
joule	J	energy, work, heat	N⋅m C⋅V W⋅s	kg⋅m2⋅s−2
watt	W	power, radiant flux	J/s V⋅A	kg⋅m2⋅s−3
coulomb	C	electric charge or quantity of electricity	s⋅A	s⋅A
volt	V	voltage, electrical potential difference, electromotive force	W/A J/C	kg⋅m2⋅s−3⋅A−1
farad	F	electric capacitance	C/V	kg−1⋅m−2⋅s4⋅A2
ohm	Ω	electric resistance, impedance, reactance	V/A	kg⋅m2⋅s−3⋅A−2
siemens	S	electrical conductance	1/Ω A/V	kg−1⋅m−2⋅s3⋅A2
weber	Wb	magnetic flux	J/A	kg⋅m2⋅s−2⋅A−1
tesla	T	magnetic field strength, magnetic flux density	V⋅s/m2 Wb/m2 N/(A⋅m)	kg⋅s−2⋅A−1
henry	H	inductance	V⋅s/A Wb/A	kg⋅m2⋅s−2⋅A−2
degree Celsius	°C	temperature relative to 273.15 K	K - 273.15	K - 273.15
lumen	lm	luminous flux	cd⋅sr	cd
lux	lx	illuminance	lm/m2	m−2⋅cd
becquerel	Bq	radioactivity (decays per unit time)	1/s	s−1
gray	Gy	absorbed dose (of ionizing radiation)	J/kg	m2⋅s−2
sievert	Sv	equivalent dose (of ionizing radiation)	J/kg	m2⋅s−2
katal	kat	catalytic activity	mol/s	s−1⋅mol

Examples of derived quantities and units

Some SI derived units
Name	Symbol	Quantity	Expression in terms of SI base units
square metre	m2	area	m2
cubic metre	m3	volume	m3
metre per second	m/s	speed, velocity	m⋅s−1
cubic metre per second	m3/s	volumetric flow	m3⋅s−1
metre per second squared	m/s2	acceleration	m⋅s−2
metre per second cubed	m/s3	jerk, jolt	m⋅s−3
metre per quartic second	m/s4	snap, jounce	m⋅s−4
radian per second	rad/s	angular velocity	s−1
newton second	N⋅s	momentum, impulse	m⋅kg⋅s−1
newton metre second	N⋅m⋅s	angular momentum	m2⋅kg⋅s−1
newton metre	N⋅m = J/rad	torque, moment of force	m2⋅kg⋅s−2
newton per second	N/s	yank	m⋅kg⋅s−3
reciprocal metre	m−1	wavenumber	m−1
kilogram per square metre	kg/m2	area density	m−2⋅kg
kilogram per cubic metre	kg/m3	density, mass density	m−3⋅kg
cubic metre per kilogram	m3/kg	specific volume	m3⋅kg−1
mole per cubic metre	mol/m3	amount of substance concentration	m−3⋅mol
cubic metre per mole	m3/mol	molar volume	m3⋅mol−1
joule second	J⋅s	action	m2⋅kg⋅s−1
joule per kelvin	J/K	heat capacity, entropy	m2⋅kg⋅s−2⋅K−1
joule per kelvin mole	J/(K⋅mol)	molar heat capacity, molar entropy	m2⋅kg⋅s−2⋅K−1⋅mol−1
joule per kilogram kelvin	J/(K⋅kg)	specific heat capacity, specific entropy	m2⋅s−2⋅K−1
joule per mole	J/mol	molar energy	m2⋅kg⋅s−2⋅mol−1
joule per kilogram	J/kg	specific energy	m2⋅s−2
joule per cubic metre	J/m3	energy density	m−1⋅kg⋅s−2
newton per metre	N/m = J/m2	surface tension, stiffness	kg⋅s−2
watt per square metre	W/m2	heat flux density, irradiance	kg⋅s−3
watt per metre kelvin	W/(m⋅K)	thermal conductivity	m⋅kg⋅s−3⋅K−1
square metre per second	m2/s	kinematic viscosity, diffusion coefficient	m2⋅s−1
pascal second	Pa⋅s = N⋅s/m2	dynamic viscosity	m−1⋅kg⋅s−1
coulomb per square metre	C/m2	electric displacement field, polarization vector	m−2⋅s⋅A
coulomb per cubic metre	C/m3	electric charge density	m−3⋅s⋅A
ampere per square metre	A/m2	electric current density	A⋅m−2
siemens per metre	S/m	conductivity	m−3⋅kg−1⋅s3⋅A2
siemens square metre per mole	S⋅m2/mol	molar conductivity	kg-1⋅s3⋅mol−1⋅A2
farad per metre	F/m	permittivity	m−3⋅kg−1⋅s4⋅A2
henry per metre	H/m	permeability	m⋅kg⋅s−2⋅A−2
volt per metre	V/m	electric field strength	m⋅kg⋅s−3⋅A−1
ampere per metre	A/m	magnetic field strength	A⋅m−1
candela per square metre	cd/m2	luminance	cd⋅m−2
lumen second	lm⋅s	luminous energy	cd⋅sr⋅s
lux second	lx⋅s	luminous exposure	cd⋅sr⋅s/m−2
coulomb per kilogram	C/kg	exposure (X and gamma rays)	kg−1⋅s⋅A
gray per second	Gy/s	absorbed dose rate	m2⋅s−3
ohm metre	Ω⋅m	resistivity	m3⋅kg⋅s−3⋅A−2

Some other metric units, such as the litre, are not SI units, but are accepted for use with the SI.

Supplementary units

Until 1995, the SI classified the radian and the steradian as supplementary units, but this designation was abandoned and the units were grouped as derived units.

See also

• International vocabulary of metrology
• International System of Quantities
• International System of Units
• SI base units
• SI prefixes
• Non-SI units accepted for use with SI
• Planck units
• Metric system

References

• I. Mills, Tomislav Cvitas, Klaus Homann, Nikola Kallay, IUPAC (June 1993). Quantities, Units and Symbols in Physical Chemistry (2nd ed.). Blackwell Science Inc. p. 72.