Shape of the universe

From Wikipedia, the free encyclopedia
  (Redirected from Edge of the Universe)
Jump to: navigation, search
"Edge of the Universe" redirects here. For the Bee Gees song, see Edge of the Universe (song).

The shape of the universe is the local and global geometry of the universe, in terms of both curvature and topology (though, strictly speaking, it goes beyond both). When physicists describe the universe as being flat or nearly flat, they're talking geometry: how space and time are warped according to general relativity. When they talk about whether it is open or closed, they're referring to its topology.[1] Although the shape of the universe is still a matter of debate in physical cosmology, based on the recent Wilkinson Microwave Anisotropy Probe (WMAP) measurements "We now know that the universe is flat with only a 0.4% margin of error", according to NASA scientists.[2] Theorists have been trying to construct a formal mathematical model of the shape of the universe. In formal terms, this is a 3-manifold model corresponding to the spatial section (in comoving coordinates) of the 4-dimensional space-time of the universe. The model most theorists currently use is the so-called Friedmann–Lemaître–Robertson–Walker (FLRW) model. According to cosmologists, on this model the observational data best fit with the conclusion that the shape of the universe is infinite and flat,[3] but the data are also consistent with other possible shapes, such as the so-called Poincaré dodecahedral space[4][5] and the Picard horn.[6]

Two aspects of shape[edit]

The local geometry of the universe is determined by whether the density parameter Ω is greater than, less than, or equal to 1.
From top to bottom: a spherical universe with Ω > 1, a hyperbolic universe with Ω < 1, and a flat universe with Ω = 1. Note that these depictions of two-dimensional surfaces are merely easily visualizable analogs to the 3-dimensional structure of (local) space.

Describing the shape of the universe requires a consideration of two aspects:

  1. its local geometry, which mostly concerns the curvature of the universe, particularly the observable universe, and
  2. its global geometry, which concerns the topology of the universe as a whole.

If the observable universe encompasses the entire universe, we may be able to determine the global structure of the entire universe by observation. However, if the observable universe is smaller than the entire universe, our observations will be limited to only a part of the whole, and we may not be able to determine its global geometry through measurement. It is possible to construct different mathematical models of the global geometry of the entire universe all of which are consistent with current observational data. For example, the observable universe may be many orders of magnitude smaller than the entire universe. The universe may be small in some dimensions and not in others (analogous to the way a cylinder is longer in the dimension of length than it is in the dimensions of width and depth). To test whether a given mathematical model describes the universe accurately, scientists look for the model's novel implications—what are some phenomena in the universe that we have not yet observed, but that must exist if the model is correct—and they devise experiments to test whether those phenomena occur or not. For example, if the universe is a small closed loop, one would expect to see multiple images of an object in the sky, although not necessarily images of the same age.

Cosmologists normally work with a given space-like slice of spacetime called the comoving coordinates, the existence of a preferred set of which is possible and widely accepted in present-day physical cosmology. The section of spacetime that can be observed is the backward light cone (all points within the cosmic light horizon, given time to reach a given observer), while the related term Hubble volume can be used to describe either the past light cone or comoving space up to the surface of last scattering. To speak of "the shape of the universe (at a point in time)" is ontologically naive from the point of view of special relativity alone: due to the relativity of simultaneity we cannot speak of different points in space as being "at the same point in time" nor, therefore, of "the shape of the universe at a point in time".

Local geometry (spatial curvature)[edit]

The local geometry is the curvature describing any arbitrary point in the observable universe (averaged on a sufficiently large scale). Many astronomical observations, such as those from supernovae and the Cosmic Microwave Background (CMB) radiation, show the observable universe to be very close to homogeneous and isotropic and infer it to be accelerating.

FLRW model of the universe[edit]

In General Relativity, this is modelled by the Friedmann–Lemaître–Robertson–Walker (FLRW) model. This model, which can be represented by the Friedmann equations, provides a curvature (often referred to as geometry) of the universe based on the mathematics of fluid dynamics, i.e. it models the matter within the universe as a perfect fluid. Although stars and structures of mass can be introduced into an "almost FLRW" model, a strictly FLRW model is used to approximate the local geometry of the observable universe.

Another way of saying this is that if all forms of dark energy are ignored, then the curvature of the universe can be determined by measuring the average density of matter within it, assuming that all matter is evenly distributed (rather than the distortions caused by 'dense' objects such as galaxies).

This assumption is justified by the observations that, while the universe is "weakly" inhomogeneous and anisotropic (see the large-scale structure of the cosmos), it is on average homogeneous and isotropic.

The homogeneous and isotropic universe allows for a spatial geometry with a constant curvature. One aspect of local geometry to emerge from General Relativity and the FLRW model is that the density parameter, Omega (Ω), is related to the curvature of space. Omega is the average density of the universe divided by the critical energy density, i.e. that required for the universe to be flat (zero curvature).

The curvature of space is a mathematical description of whether or not the Pythagorean theorem is valid for spatial coordinates. In the latter case, it provides an alternative formula for expressing local relationships between distances:

  • If the curvature is zero, then Ω = 1, and the Pythagorean theorem is correct;
  • If Ω > 1, there is positive curvature; and
  • if Ω < 1 there is negative curvature.

In the last two cases, the Pythagorean theorem is invalid (but discrepancies are only detectable in triangles whose sides' lengths are of cosmological scale).

If you measure the circumferences of circles of steadily larger diameters and divide the former by the latter, all three geometries give a value very close to π for small enough diameters but the ratio departs from π for larger diameters unless Ω = 1:

  • For Ω > 1 (the sphere, see diagram) the ratio falls below π: indeed, a great circle on a sphere has circumference only twice its diameter.
  • For Ω < 1 the ratio rises above π.

Astronomical measurements of both matter-energy density of the universe and spacetime intervals using supernova events constrain the spatial curvature to be very close to zero, although they do not constrain its sign. This means that although the local geometries of spacetime are generated by the theory of relativity based on spacetime intervals, we can approximate 3-space by the familiar Euclidean geometry.

Possible local geometries[edit]

There are three categories for the possible spatial geometries of constant curvature, depending on the sign of the curvature. If the curvature is exactly zero, then the local geometry is flat; if it is positive, then the local geometry is spherical, and if it is negative then the local geometry is hyperbolic.

The geometry of the universe is usually represented in the system of comoving coordinates, according to which the expansion of the universe can be ignored. Comoving coordinates form a single frame of reference according to which the universe has a static geometry of three spatial dimensions.

Under the assumption that the universe is homogeneous and isotropic, the curvature of the observable universe, or the local geometry, is described by one of the three "primitive" geometries (in mathematics these are called the model geometries):

Even if the universe is not exactly spatially flat, the spatial curvature is close enough to zero to place the radius at approximately the horizon of the observable universe or beyond.

Global structure: geometry and topology[edit]

Global structure covers the geometry and the topology of the whole universe—both the observable universe and beyond. While the local geometry does not determine the global geometry completely, it does limit the possibilities, particularly a geometry of a constant curvature. For this discussion, the universe is taken to be a geodesic manifold, free of topological defects; relaxing either of these complicates the analysis considerably.

A global geometry is a local geometry plus a topology. It follows that a topology alone does not give a global geometry: for instance, Euclidean 3-space and hyperbolic 3-space have the same topology but different global geometries.

Investigations within the study of global structure of include

  • Whether the universe is infinite or finite in extent
  • The scale or size of the entire universe (if it is finite)
  • Whether the geometry is flat, positively curved, or negatively curved
  • Whether the topology is simply connected like a sphere or multiply connected like a torus

Infinite or finite[edit]

One of the presently unanswered questions about the universe is whether it is infinite or finite in extent. Mathematically, the question of whether the universe is infinite or finite is referred to as boundedness. An infinite universe (unbounded metric space) means that there are points arbitrarily far apart: for any distance d, there are points that are of a distance at least d apart. A finite universe is a bounded metric space, where there is some distance d such that all points are within distance d of each other. The smallest such d is called the diameter of the universe, in which case the universe has a well-defined "volume" or "scale."

Closed manifolds[edit]

Many finite mathematical spaces, e.g. a disc, have an edge or boundary. Spaces that have an edge are difficult to treat, both conceptually and mathematically. Namely, it is very difficult to state what would happen at the edge of such a universe. For this reason, spaces that have an edge are typically excluded from consideration. However, there exist many finite spaces, such as the 3-sphere and 3-torus, which have no edges. Mathematically, these spaces are referred to as being compact without boundary. The term compact basically means that it is finite in extent ("bounded") and is a closed set. The term "without boundary" means that the space has no edges. Moreover, so that calculus can be applied, the universe is typically assumed to be a differentiable manifold. A mathematical object that possess all these properties, compact without boundary and differentiable, is termed a closed manifold. The 3-sphere and 3-torus are both closed manifolds.

Scale[edit]

For spherical and hyperbolic spatial geometries, the curvature gives a scale (either by using the radius of curvature or its inverse), a fact noted by Carl Friedrich Gauss in an 1824 letter to Franz Taurinus.[7]

For a flat spatial geometry, the scale of any properties of the topology is arbitrary and may or may not be directly detectable.

The probability of detection of the topology by direct observation depends on the spatial curvature: a small curvature of the local geometry, with a corresponding radius of curvature greater than the observable horizon, makes the topology difficult or impossible to detect if the curvature is hyperbolic. A spherical geometry with a small curvature (large radius of curvature) does not make detection difficult.

Analysis of data from WMAP implies that on the scale to the surface of last scattering, the density parameter of the Universe is within about 0.5% of the value representing spatial flatness.[8]

Curvature[edit]

The curvature of the universe places constraints on the topology. If the spatial geometry is spherical, i.e. possess positive curvature, the topology is compact. For a flat (zero curvature) or a hyperbolic (negative curvature) spatial geometry, the topology can be either compact or infinite.[9] Many textbooks erroneously state that a flat universe implies an infinite universe; however, the correct statement is that a flat universe that is also simply connected implies an infinite universe.[9] For example, Euclidean space is flat, simply connected and infinite, but the torus is flat, multiply connected, finite and compact.

In general, local to global theorems in Riemannian geometry relate the local geometry to the global geometry. If the local geometry has constant curvature, the global geometry is very constrained, as described in Thurston geometries.

The latest research shows that even the most powerful future experiments (like SKA, Planck..) will not be able to distinguish between flat, open and closed universe if the true value of cosmological curvature parameter is smaller than 10−4. If the true value of the cosmological curvature parameter is larger than 10−3 we will be able to distinguish between these three models even now.[10]

Universe with zero curvature[edit]

In a universe with zero curvature, the local geometry is flat. The most obvious global structure is that of Euclidean space, which is infinite in extent. Flat universes that are finite in extent include the torus and Klein bottle. Moreover, in three dimensions, there are 10 finite closed flat 3-manifolds, of which 6 are orientable and 4 are non-orientable. The most familiar is the aforementioned 3-Torus universe.

In the absence of dark energy, a flat universe expands forever but at a continually decelerating rate, with expansion asymptotically approaching zero. With dark energy, the expansion rate of the universe initially slows down, due to the effect of gravity, but eventually increases. The ultimate fate of the universe is the same as that of an open universe.

A flat universe can have zero total energy.

Universe with positive curvature[edit]

A positively curved universe is described by spherical geometry, and can be thought of as a three-dimensional hypersphere, or some other spherical 3-manifold (such as the Poincaré dodecahedral space), all of which are quotients of the 3-sphere.

Poincaré dodecahedral space, a positively curved space, colloquially described as "soccerball-shaped", as it is the quotient of the 3-sphere by the binary icosahedral group, which is very close to icosahedral symmetry, the symmetry of a soccer ball. This was proposed by Jean-Pierre Luminet and colleagues in 2003[4][11] and an optimal orientation on the sky for the model was estimated in 2008.[5]

Universe with negative curvature[edit]

A hyperbolic universe, one of a negative spatial curvature, is described by hyperbolic geometry, and can be thought of locally as a three-dimensional analog of an infinitely extended saddle shape. There are a great variety of hyperbolic 3-manifolds, and their classification is not completely understood. For hyperbolic local geometry, many of the possible three-dimensional spaces are informally called horn topologies, so called because of the shape of the pseudosphere, a canonical model of hyperbolic geometry.An example is the Picard horn, a negatively curved space, colloquially described as "funnel-shaped".[6]

Curvature: Open or closed[edit]

When cosmologists speak of the universe as being "open" or "closed", they most commonly are referring to whether the curvature is negative or positive. These meanings of open and closed are different from the mathematical meaning of open and closed used for sets in metric spaces and for the mathematical meaning of open and closed manifolds, which gives rise to ambiguity and confusion. In mathematics, there are definitions for a closed manifold (i.e. compact without boundary) and open manifold (i.e. one that is not compact and without boundary,[12]). A "closed universe" is necessarily a closed manifold. An "open universe" can be either a closed or open manifold. For example, the Friedmann–Lemaître–Robertson–Walker (FLRW) model the universe is considered to be without boundaries, in which case "compact universe" could describe a universe that is a closed manifold.

Milne model ("spherical" expanding)[edit]

Main article: Milne model
Universe in an expanding sphere. The galaxies farthest away are moving fastest and hence experience length contraction and so become smaller to an observer in the centre.

If one applies Minkowski space-based Special Relativity to expansion of the universe, without resorting to the concept of a curved spacetime, then one obtains the Milne model. Any spatial section of the universe of a constant age (the proper time elapsed from the Big Bang) will have a negative curvature; this is merely a pseudo-Euclidean geometric fact analogous to one that concentric spheres in the flat Euclidean space are nevertheless curved. Spacial geometry of this model is an unbounded hyperbolic space. The entire universe is contained within a light cone, namely the future cone of the Big Bang. For any given moment t > 0 of coordinate time (assuming the Big Bang has t = 0), the entire universe is bounded by a sphere of radius exactly c t. The apparent paradox of an infinite universe contained within a sphere is explained with length contraction: the galaxies farther away, which are travelling away from the observer the fastest, will appear thinner.

This model is essentially a degenerate FLRW for Ω = 0. It is incompatible with observations that definitely rule out such a large negative spatial curvature. However, as a background in which gravitational fields (or gravitons) can operate, due to diffeomorphism invariance, the space on the macroscopic scale, is equivalent to any other (open) solution of Einstein's field equations.

See also[edit]

References[edit]

  1. ^ Marcus Y. Yoo (2011). "Unexpected connections". Engineering & Science (Caltech). LXXIV1: 30. 
  2. ^ http://map.gsfc.nasa.gov/universe/uni_shape.html
  3. ^ Demianski, Marek; Sánchez, Norma; Parijskij, Yuri N. (2003). "Topology of the universe and the cosmic microwave background radiation". The Early Universe and the Cosmic Microwave Background: Theory and Observations. Proceedings of the NATO Advanced Study Institute. The early universe and the cosmic microwave background: theory and observations (Springer) 130: 161. Bibcode:2003eucm.book..159D. ISBN 1-4020-1800-2. , Extract of page 161
  4. ^ a b Luminet, Jean-Pierre; Weeks, Jeff; Riazuelo, Alain; Lehoucq, Roland; Uzan, Jean-Phillipe (2003-10-09). "Dodecahedral space topology as an explanation for weak wide-angle temperature correlations in the cosmic microwave background". Nature (Nature) 425 (6958): 593–5. arXiv:astro-ph/0310253. Bibcode:2003Natur.425..593L. doi:10.1038/nature01944. PMID 14534579. 
  5. ^ a b Roukema, Boudewijn; Zbigniew Buliński; Agnieszka Szaniewska; Nicolas E. Gaudin (2008). "A test of the Poincare dodecahedral space topology hypothesis with the WMAP CMB data". Astronomy and Astrophysics 482 (3): 747. arXiv:0801.0006. Bibcode:2008A&A...482..747L. doi:10.1051/0004-6361:20078777. 
  6. ^ a b Aurich, Ralf; Lustig, S.; Steiner, F.; Then, H. (2004). "Hyperbolic Universes with a Horned Topology and the CMB Anisotropy". Classical and Quantum Gravity 21 (21): 4901–4926. arXiv:astro-ph/0403597. Bibcode:2004CQGra..21.4901A. doi:10.1088/0264-9381/21/21/010. 
  7. ^ Carl F. Gauss, Werke 8, 175–239, cited and translated in John W. Milnor (1982) Hyperbolic geometry: The first 150 years, Bull. Amer. Math. Soc. (N.S.) 6(1), p. 10. Milnor's translation reads:
    "The assumption that the sum of the three angles [of a triangle] is smaller than 180° leads to a geometry which is quite different from our (euclidean) geometry, but which is in itself completely consistent. I have satisfactorily constructed this geometry for myself so that I can solve every problem, except for the determination of one constant, which cannot be ascertained a priori. The larger one chooses this constant, the closer one approximates euclidean geometry. . . . If non-euclidean geometry were the true geometry, and if this constant were comparable to distances which we can measure on earth or in the heavens, then it could be determined a posteriori. Hence I have sometimes in jest expressed the wish that euclidean geometry is not true. For then we would have an absolute a priori unit of measurement."
  8. ^ a b Luminet, Jean-Pierre; Lachi`eze-Rey, Marc (1995). "Cosmic Topology". Physics Reports 254 (3): 135–214. arXiv:gr-qc/9605010. doi:10.1016/0370-1573(94)00085-h. 
  9. ^ Mihran Vardanyan et al. How flat can you get?, A model comparison perspective on the curvature of the Universe
  10. ^ "Is the universe a dodecahedron?", article at PhysicsWeb.
  11. ^ Since the universe is assumed connected, we do not need to specify the more technical "an open manifold is one without compact component".

External links[edit]