Energy Policy and Conservation Act

From Wikipedia, the free encyclopedia
Jump to: navigation, search
Energy Policy and Conservation Act of 1975
Great Seal of the United States.
Long title An Act to increase domestic energy supplies and availability; to restrain energy demand; to prepare for energy emergencies; and for other purposes.
Colloquial acronym(s) EPCA
Enacted by the  94th United States Congress
Citations
Public Law Pub. L. No. 94-163
Legislative history
  • Introduced in the Senate as S.622 by Sen. Henry M. Jackson (D-WA) on February 7, 1975
  • Passed the Senate on April 10, 1975 (60-25)
  • Passed the House on September 23, 1975 (255-148)
  • Reported by the joint conference committee on December 9, 1975; agreed to by the House on December 15, 1975 (300-103) and by the Senate on December 17, 1975 (58-40)
  • Signed into law by President Gerald Ford on December 22, 1975
Major amendments
National Energy Conservation Policy Act

The Energy Policy and Conservation Act of 1975 (EPCA) is a United States Act of Congress that responded to the 1973 oil crisis by creating a comprehensive approach to federal energy policy. The primary goals of EPCA are to increase energy production and supply, reduce energy demand, provide energy efficiency, and give the executive branch additional powers to respond to disruptions in energy supply.[1] Most notably, EPCA established the Strategic Petroleum Reserve, the Energy Conservation Program for Consumer Products, and Corporate Average Fuel Economy regulations.

Strategic Petroleum Reserve[edit]

The EPCA declared it to be U.S. policy to establish a reserve petroleum, setting the Strategic Petroleum Reserve (SPR) into motion, and extended the Emergency Petroleum Allocation Act of 1973 (EPAA). A number of existing storage sites were acquired in 1977. Construction of the first surface facilities began in June 1977. On July 21, 1977, the first oil—approximately 412,000 barrels (65,500 m3) of Saudi Arabian light crude—was delivered to the SPR. Fill was suspended in FY 1995 to devote budget resources to refurbishing the SPR equipment and extending the life of the complex. The current SPR sites are expected to be usable until around 2025. Fill was resumed in 1999.

The need for a national oil storage reserve had been recognized for at least three decades. Secretary of the Interior Harold L. Ickes advocated the stockpiling of emergency crude oil in 1944. President Harry S Truman's Minerals Policy Commission proposed a strategic oil supply in 1952. President Dwight Eisenhower suggested an oil reserve after the 1956 Suez Crisis. The Cabinet Task Force on Oil Import Control recommended a similar reserve in 1970.

But few events so dramatically underscored the need for a strategic oil reserve as the 1973-74 oil embargo. The cutoff of oil flowing into the United States from OPEC sent economic shockwaves throughout the nation. In the aftermath of the oil crises, the United States established the SPR.

Energy Efficiency[edit]

Corporate Average Fuel Economy[edit]

Part A of Title III of the EPCA established the Corporate Average Fuel Economy standards for automobiles. The average fuel economy for model years, 1978, 1979, and 1980 were set at 18, 19, and 20 miles per gallon, respectively, and by 1985 the average economy was required to be 27.5 mpg Furthermore, automobiles were required to be labeled with their fuel economies, estimated fuel costs, and the range of fuel economy for comparable vehicles after the 1976 model year.[1] The National Highway Traffic Safety Administration was given the authority to regulate fuel economies for automobiles and light trucks.[2]

Energy Conservation Program for Consumer Products[edit]

Part B of Title III of the EPCA established the Energy Conservation Program, which gives the Department of Energy the "authority to develop, revise, and implement minimum energy conservation standards for appliances and equipment."[3] As currently implemented, the Department of Energy currently enforces test procedures and minimum standards for more than 50 products covering residential, commercial and industrial, lighting, and plumbing applications.[4]

Other provisions[edit]

In addition to energy efficiency measures and the strategic petroleum reserve, the EPCA contained several policies to encourage the production of domestic energy sources. The EPCA authorized a program to promote coal production that would guarantee qualifying underground coal mining operations up to $30 million per project. The qualifying requirements are tailored to promote more environmentally friendly development and smaller coal producers. Recipients of the loan guarantees are required to have a contract with a customer who is certified by the Environmental Protection Agency to operate their plant in compliance with the Clean Air Act. At least 80% of the total guarantee amount must finance low-sulfur coal development. Finally, large coal or oil companies are prohibited from receiving loan guarantees.[1]

Complementary to the increased coal production goals of the legislation, the EPCA also provided mechanisms to allow the government to ensure that natural gas and petroleum based fuels are available to consumers in times of fuel shortages or crises. The Federal Energy Administration's authority to require power plants to burn coal instead of natural gas or petroleum based fuels was extended through 1977. This mechanism would reduce the use of these fuels for power generation and free them for use by other consumers. Furthermore, the President was given authority to order maximum domestic oil and gas production, and the President was directed to submit plans for energy conservation and energy rationing in case of a fuel shortage.[1]

References[edit]

  1. ^ a b c d "The Energy Policy and Conservation Act (P.L. 94-163, 42 U.S.C. 6201)". William & Mary Environmental Law and Policy Review 1 (2). 1976. 
  2. ^ Yacobucci, B.; Bamberger, R. (2007). Automobile and Light Truck Fuel Economy: The CAFE Standards. Congressional Research Service. Retrieved 2 April 2013. 
  3. ^ "Statutory Authorities and Rules". eere.energy.gov. U.S. Department of Energy. Retrieved 26 March 2013. 
  4. ^ "Standards and Test Procedures". eere.energy.gov. U.S. Department of Energy. Retrieved 26 March 2013. 

External links[edit]