HP 48 series
||This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (November 2014)|
|Precision||12 BCD digits, exp ±499|
|Display Size||131×64 pixels|
|Processor||Yorke (Saturn 1LT8 core)|
|Programming language(s)||RPL / Machine Language|
|User Memory||128 KB|
|Firmware Memory||512 KB|
|External Memory||Port 1 128 KB
Port 2 4,096 KB
|Connection||4-pin RS-232, Infrared|
|Ports||Serial: Kermit (protocol)|
|Power supply||3 x AAA battery 4.5V (1.5V each)|
|Weight||0.25 kg (0.55 lb)|
|Dimensions||17.9 x 7.9 x 2.8 cm (7.05 x 3.11 x 1.1 in)|
The HP 48 is a series of graphing calculators using Reverse Polish notation (RPN) and the RPL programming language, produced by Hewlett-Packard (HP) from 1990 until 2003. The series include the HP 48S, HP 48SX, HP 48G, HP 48GX, and HP 48G+, the G models being expanded and improved versions of the S models. The models with an X suffix are expandable via special RAM (memory expansion) and ROM (software application) cards. In particular, the GX models have more onboard memory than the G models. The G+ models have more onboard memory only. The SX and S models have the same amount of onboard memory.
The hardware architecture developed for the HP 48 series became the basis for the HP 38G, with a simplified user interface and an infix input method, and the HP 49G with various software enhancements. Likewise, the hardware and software design of the HP 48 calculators are themselves strongly influenced by other calculators in the HP line, most of all by the HP-18C and the HP-28 series.
Models / Availability
The HP 48SX was introduced on 1990-03-06.
- 48SX: 1990-1993
- 48S: 1991-1993
- 48GX (F1895A): 1993-2003
- 48G: 1993-2003
- 48G+ (F1630A, F1894A): 1998-2003
The HP 48 series' Saturn microprocessor is a hybrid 64-bit / 20-bit CPU hardware-wise but acts like a 4-bit processor in that it presents nibble-based data to programs and uses a nibble-based addressing system. The main registers A, B, C, D, along with temp registers R0, R1, R2, R3, and R4 are a full 64-bits wide, but the data registers D0 & D1 are only 20-bit. External logical data fetches are transparently converted to 8-bit physical fetches. The processor has a 20-bit address bus available to code but due to the presence of the high/low nibble selection bit, only 19 bits are available externally.
In both the HP 48S/SX and G/GX series, the Saturn CPU core is integrated as part of a more complex integrated circuit (IC) package. These packages have codenames inspired by the members of the Lewis and Clark Expedition. The codename of the IC is Clarke in the S/SX, after William Clark, and Yorke in the G/GX, after Clark's manservant. The previous series of Saturn-based ICs were codenamed Lewis, after Meriwether Lewis.
Common for all models
- CPU architecture: Saturn
- Screen resolution: 131×64 pixels
- Communication ports: 4-pin RS-232 (Serial port) or Infrared port (not IrDA)
- Data bus width: 8-bit (external)
- Maximum 4-bit-cell address width: 20 bits (leading to the address space shown next)
- Logical address space: 512 KB
- Maximum register size: 64 bit (both working and scratch registers)
- Available expansion card ports on X models: 2
- Expansion card pins: 40
HP 48S/HP 48SX specific
- CPU clock frequency: 2 MHz
- Memory clock frequency: 2 MHz
- CPU codename: Clarke (Saturn 1LT8 core)
- Communication protocol(s): Serial transfers: Kermit (protocol); Infrared transfers: proprietary
- On-board ROM: 256 KB
- On-board RAM: 32 KB
- Maximum additional memory per expansion card: 128 KB (48SX only)
- ROM versions: A, B, C, D, E, F, J
HP 48G/HP 48GX/HP 48G+ specific
- CPU clock frequency: 3.68 to 4 MHz
- Some claim that the frequency varies according to temperature 
- According to one of the engineers on the design team of the HP 48G series (Dave Arnett), the yields for 4 MHz CPUs were essentially separated into two parts: the ones closest to spec, generally near 3.93-3.94 MHz, were reserved for the expandable models (GX), and those just slightly under spec were used for the non-expandable units (G). Eventually the yields improved and the CPUs which clocked closer to 4 MHz were installed in the non-expandable units as well. The effects of (non-extreme) temperatures are almost negligible.
- Memory clock frequency: 2 MHz
- CPU codename: Yorke (Saturn 1LT8 core)
- Communication protocol(s): Serial transfers: Kermit (protocol) or Xmodem; Infrared transfers: proprietary
- On-board ROM: 512 KB
- On-board RAM: 32 KB (48G) or 128 KB (48G+/48GX)
- Maximum additional memory for expansion card port 1: 128 KB
- Maximum additional memory for expansion card port 2: 4 MB (128 KB addressable at any given time via bank switching)
- Other communication protocols: XModem
- ROM versions: K, L, M, P, R
The HP 48 series of calculators support a stack-based programming language named Reverse Polish Lisp (RPL), a combination of Reverse Polish Notation (RPN) and Lisp. RPL adds the concepts of lists and functions to stack-based programming, allowing the programmer to pass unevaluated code as arguments to functions, or return unevaluated code from a function by leaving it on the stack. In spite of the name, RPL resembles Forth more closely than Lisp.
RPL comes in two flavors: User RPL and System RPL. User RPL is the language that a user can program directly on the calculator. System RPL requires an external compiler; this may be done on the calculator with a third-party utility, or on another machine. The two languages vary mainly in the number of low-level operations available to them. User RPL does not expose any commands that do not check their arguments. Consequently, User RPL programs cannot normally crash the calculator (and are therefore slower than System RPL programs), whereas a System RPL program that invokes a command with incorrect arguments will almost certainly leave the calculator in a state which requires a full memory reset (occasionally referred to as a three-finger salute because it requires pressing the ON, the A, and the F keys on the calculator at the same time).
It is also possible to program the HP48 directly in Machine Language code. Books are available on this subject and some of them are freely available on the web (see external links).
Programmers working in System RPL or machine language most commonly work on an HP48 emulator because it is much quicker and easier to restore the state of a crashed emulator than to restore a crashed calculator.
- Wickes, W. C. and Patton, C. M. (1991). "The HP 48SX Scientific Expandable Calculator: Innovation and Evolution" (PDF). Hewlett-Packard Journal 42 (3): 6–12.
- Paul Courbis and Sébastien Lalande (1991), French book about ML programming and more "Voyage au centre de la HP48". (with HP48 applications). (PDF files).
- Paul Courbis and Sébastien Lalande, translated in English by Douglas R. Cannon (1993) "HP48 Machine Language Programming". (with HP48 applications). (PDF files).
- Paul Courbis (1993), French book about ML programming and more "Voyage au centre de la HP48g/gx". (with HP48 applications). (PDF files).
- Byrne; Diana K. et al. (1994). "An Advanced Scientific Graphing Calculator: A concise treatment of design objectives, major engineering decisions, and the hardware/software of the HP 48G/GX, compared to the S/SX". Hewlett-Packard Journal 45 (4): 6–22.
- Mastracci, M. (1998) "Guide to the Saturn Processor". (with HP48 applications). Retrieved May 3, 2006. (Plain text file).
- "Serie HP 48G - Benutzerhandbuch" (German), Hewlett-Packard. Edition 4 (1994-02, 1996-10), HP part number 00048-90127, first published: 1993-07.
- "HP 48G Series - Advanced User's Reference Manual" (AUR), Hewlett-Packard. Edition 4 (1994-12), HP part number 00048-90136, 0-88698-01574-2, first published: edition 1 (1993-07).
|Wikimedia Commons has media related to HP 48.|
- The Museum of Hewlett-Packard Calculators: HP 48S/SX
- Bubblestuff Wiki
- The HP48 Goodies Page
- The HPCALC.org web site
- HP48 FAQ (including program list)
- AdictosHP Community (Spanish)
- ABC HP48G (Italian)
- HP 48GX on Porter Electronics (Website where they are still available)
- Emu48 for Windows
- X48 for Mac OS X, POSIX (unix/linux)
- m48 - HP48 emulator for the iPhone, based on Emu48
- Droid48 - HP48 Emulator for Android OS, based on X48
- An HP48 emulator - decompiler for Unix/Linux or Windows (using Cygwin) by Paul Courbis