|This article needs additional citations for verification. (December 2009)|
A modern claw hammer
A hammer is a tool that delivers a blow (a sudden impact) to an object. The most common uses for hammers are to drive nails, fit parts, forge metal, and break apart objects. Hammers vary in shape, size, and structure, depending on their purposes.
Hammers are basic tools in many trades. The usual features are a head (most often made of steel) and a handle (also called a helve or haft). Most hammers are hand tools, but there are also many powered versions—power hammers (also called steam hammers or trip hammers, depending on design)—for heavier uses.
- 1 History
- 2 Designs and variations
- 3 Tools used in conjunction with hammers
- 4 Physics of hammering
- 5 War hammers
- 6 Symbolic hammers
- 7 Gallery
- 8 See also
- 9 References
- 10 External links
The use of simple hammers dates to about 2,600,000 BCE when various shaped stones were used to strike wood, bone, or other stones to break them apart and shape them. Stones attached to sticks with strips of leather or animal sinew were being used as hammers with handles by about 30,000 BCE during the middle of the Paleolithic Stone Age.
Designs and variations
The essential part of a hammer is the head, a compact solid mass that is able to deliver the blow to the intended target without itself deforming. The opposite side may have a ball shape, as in the ball-peen hammer and the cow hammer (sometimes used for livestock slaughter, but now disparaged for animal cruelty). Some upholstery hammers have a magnetized face, to pick up tacks. In the hatchet, the hammer head is secondary to the cutting edge of the tool.
The impact between steel hammer heads and the objects being hit can create sparks, which may ignite flammable or explosive gases. These are a hazard in some industries such as underground coal mining (methane gas), or in other hazardous environments such as petroleum refineries and chemical plants. In these environments, a variety of non-sparking metal tools are used, primarily aluminium or beryllium copper hammers.
In recent years, the handles have been made of durable plastic or rubber, though wood is still widely used.
Popular hand-powered variations include:
- Ball-peen hammer, or mechanic's hammer
- Boiler scaling hammer
- Brass hammer, also known as non-sparking hammer or spark-proof hammer and used mainly in flammable areas like oil fields
- Brickhammer or stonemason's hammer
- Carpenter's hammer (used for nailing), such as the framing hammer and the claw hammer, and pinhammers (ball-peen and cross-peen types) 
- Cross-peen hammer, having one round face and one wedge-peen face.
- Drilling hammer - a short handled sledgehammer originally used for drilling in rock with a chisel. The name usually refers to a hammer with a 2-4 lb head and a 10-inch handle, also called a "single-jack" hammer because it was used by one person drilling, holding the chisel in one hand and the hammer in the other. In modern usage, the term is mostly interchangeable with "engineer's hammer," although it can indicate a version with a slightly shorter handle.
- Engineer's hammer, a short-handled hammer, originally an essential components of a railroad engineer's toolkit for working on steam locomotives. Typical weight is 2-4 lbs (0.9-1.8 kg) with a 12-14 inch (30–35 cm) handle. Originally these were often cross-peen hammers, with one round face and one wedge-peen face, but in modern usage the term primarily refers to hammers with two round faces.
- Gavel, used by judges and presiding authorities to draw attention
- Geologist's hammer or rock pick
- Joiner's hammer, or Warrington hammer
- Knife-edged hammer, its properties developed to aid a hammerer in the act of slicing whilst bludgeoning
- Lathe hammer (also known as a lath hammer, lathing hammer, or lathing hatchet), a tool used for cutting and nailing wood lath, which has a small hatchet blade on one side (with a small, lateral nick for pulling nails) and a hammer head on the other
- Lump hammer, or club hammer
- Mallets, including the rubber hammer and dead blow hammer
- Railway track keying hammer
- Rock climbing hammer
- Sledge hammer
- Soft-faced hammer
- Splitting maul
- Stonemason's hammer
- Tinner's hammer
- Upholstery hammer
- Welder's chipping hammer
Mechanically-powered hammers often look quite different from the hand tools, but nevertheless most of them work on the same principle. They include:
- Hammer drill, that combines a jackhammer-like mechanism with a drill
- High Frequency Impact Treatment hammer — for aftertreatment of weld transitions
- Steam hammer
- Trip hammer
Tools used in conjunction with hammers
- Star drill
- Woodsplitting maul - can be hit with a sledgehammer for splitting wood.
- Woodsplitting wedge - hit with a sledgehammer for splitting wood.
Physics of hammering
Hammer as a force amplifier
In the swing that precedes each blow, the hammer head stores a certain amount of kinetic energy—equal to the length D of the swing times the force f produced by the muscles of the arm and by gravity. When the hammer strikes, the head is stopped by an opposite force coming from the target, equal and opposite to the force applied by the head to the target. If the target is a hard and heavy object, or if it is resting on some sort of anvil, the head can travel only a very short distance d before stopping. Since the stopping force F times that distance must be equal to the head's kinetic energy, it follows that F is much greater than the original driving force f—roughly, by a factor D/d. In this way, great strength is not needed to produce a force strong enough to bend steel, or crack the hardest stone.
Effect of the head's mass
The amount of energy delivered to the target by the hammer-blow is equivalent to one half the mass of the head times the square of the head's speed at the time of impact (). While the energy delivered to the target increases linearly with mass, it increases quadratically with the speed (see the effect of the handle, below). High tech titanium heads are lighter and allow for longer handles, thus increasing velocity and delivering more energy with less arm fatigue than that of a steel head hammer of the same weight. As hammers must be used in many circumstances, where the position of the person using them cannot be taken for granted, trade-offs are made for the sake of practicality. In areas where one has plenty of room, a long handle with a heavy head (like a sledge hammer) can deliver the maximum amount of energy to the target. It is not practical to use such a large hammer for all tasks, however, and thus the overall design has been modified repeatedly to achieve the optimum utility in a wide variety of situations.
Effect of the handle
The handle of the hammer helps in several ways. It keeps the user's hands away from the point of impact. It provides a broad area that is better-suited for gripping by the hand. Most importantly, it allows the user to maximize the speed of the head on each blow. The primary constraint on additional handle length is the lack of space to swing the hammer. This is why sledge hammers, largely used in open spaces, can have handles that are much longer than a standard carpenter's hammer. The second most important constraint is more subtle. Even without considering the effects of fatigue, the longer the handle, the harder it is to guide the head of the hammer to its target at full speed. Most designs are a compromise between practicality and energy efficiency. Too long a handle: the hammer is inefficient because it delivers force to the wrong place, off-target. Too short a handle: the hammer is inefficient because it doesn't deliver enough force, requiring more blows to complete a given task. Recently,[when?] modifications have also been made with respect to the effect of the hammer on the user. A titanium head has about 3% recoil and can result in greater efficiency and less fatigue when compared to a steel head with up to 30% recoil. Handles made of shock-absorbing materials or varying angles attempt to make it easier for the user to continue to wield this age-old device, even as nail guns and other powered drivers encroach on its traditional field of use.
Effect of gravity
Gravity exerts a force on the hammer head. If hammering downwards, gravity increases the acceleration during the hammer stroke and increases the energy delivered with each blow. If hammering upwards, gravity reduces the acceleration during the hammer stroke and therefore reduces the energy delivered with each blow. Some hammering methods, such as pile drivers,[specify] rely entirely on gravity for acceleration on the down stroke.
The hammer, being one of the most used tools by Homo sapiens, has been used very much in symbols and arms. In the Middle Ages it was used often in blacksmith guild logos, as well as in many family symbols. The hammer and pick is used as a symbol of mining. A well known symbol with a hammer in it is the Hammer and Sickle, which was the symbol of the former Soviet Union and is very interlinked with Communism/Socialism. The hammer in this symbol represents the industrial working class (and the sickle the agricultural working class). The hammer is used in some coat of arms in (former) socialist countries like East Germany. Similarly, the Hammer and Sword symbolizes Strasserism, a strand of National Socialism orientated toward the working class.
The gavel, a small wooden mallet, is used to symbolize a mandate to preside over a meeting or judicial proceeding, and a graphic image of one is used as a symbol of legislative or judicial decision-making authority.
In Norse Mythology, Thor, the god of thunder and lightning, wields a hammer named Mjölnir. Many artifacts of decorative hammers have been found, leading modern practitioners of this religion to often wear reproductions as a sign of their faith.
Judah Maccabee, "The Hammer".
- Semaw, S., M. J. Rogers, J. Quade, P. R. Renne, R. F. Butler, M. Domínguez-Rodrigo, D. Stout, W. S. Hart, T. Pickering, and S. W. Simpson. 2003. 2.6-Million-year-old stone tools and associated bones from OGS-6 and OGS-7, Gona, Afar, Ethiopia. Journal of Human Evolution 45:169-177.
- 2.5-million-year-old stone tools from Gona, Ethiopia, S. Semaw, P. Renne, J. W. K. Harris, C. S. Feibel, R. L. Bernor, N. Fesseha, and K. Mowbray, Nature 385, 333-336 (23 January 1997) doi:10.1038/385333a0; Accepted 25 November 1996
- "Non Sparking hammers". Retrieved 2013-04-18.
- British Standard BS 876:1995 Specification for Hand Hammers
- "Tools for Pounding and Hammering". Retrieved 2014-08-03.
- E. Fish Ensie (Feb 1909). "Handling Locomotive Supplies, Part III.--Standardization". American Engineer and Railway Journal: 55. Retrieved 2013-08-03.
- Farlex. Lathing hammer. The Free Dictionary.
- Chuck Cage (2011-06-15). "DeWalt’s Titanium Hammer Killer?". Toolmonger. Retrieved 2013-04-18.
- "Hammers & Nail Pullers". Retrieved 2013-04-18.
|Wikimedia Commons has media related to Hammers.|
|Look up hammer in Wiktionary, the free dictionary.|
- Hammer types images and descriptions.
- The Hammer Museum
- "Choosing a Hammer." Popular Science, June 1960, pp. 164–167.