In the fields of histology, pathology, and cell biology, fixation is a chemical process by which biological tissues are preserved from decay, thereby preventing autolysis or putrefaction. Fixation terminates any ongoing biochemical reactions, and may also increase the mechanical strength or stability of the treated tissues.
 Purposes of fixation
Fixation of tissue is done for several reasons. One reason is to kill the tissue so that postmortem decay (autolysis and putrefaction) is prevented. Fixation preserves a sample of biological material (tissue or cells) as close to its natural state as possible in the process of preparing tissue for examination. To achieve this, several conditions usually must be met.
Second, a fixative typically protects a sample from extrinsic damage. Fixatives are toxic to most common microorganisms (bacteria in particular) that might exist in a tissue sample or which might otherwise colonise the fixed tissue. In addition, many fixatives chemically alter the fixed material to make it less palatable (either indigestible or toxic) to opportunistic microorganisms.
Finally, fixatives often alter the cells or tissues on a molecular level to increase their mechanical strength or stability. This increased strength and rigidity can help preserve the morphology (shape and structure) of the sample as it is processed for further analysis.
Even the most careful fixation does alter the sample and introduce artifacts that can interfere with interpretation of cellular ultrastructure. A prominent example is the bacterial mesosome, which was thought to be an organelle in gram-positive bacteria in the 1970s, but was later shown by new techniques developed for electron microscopy to be simply an artifact of chemical fixation. Standardization of fixation and other tissue processing procedures takes this introduction of artifacts into account, by establishing what procedures introduce which kinds of artifacts. Researchers who know what types of artifacts to expect with each tissue type and processing technique can accurately interpret sections with artifacts, or choose techniques that minimize artifacts in areas of interest.
 Fixation process
Fixation is usually the first stage in a multistep process to prepare a sample of biological material for microscopy or other analysis. Therefore, the choice of fixative and fixation protocol may depend on the additional processing steps and final analyses that are planned. For example, immunohistochemistry uses antibodies that bind to a specific protein target. Prolonged fixation can chemically mask these targets and prevent antibody binding. In these cases, a 'quick fix' method using cold formalin for around 24 hours is typically used.
|This section requires expansion. (June 2008)|
and the material used
 Types of fixation
There are generally three types of fixation process:
Heat fixation: After a smear has dried at room temperature, the slide is gripped by tongs or a clothespin and passed through the flame of a Bunsen burner several times to heat-kill and adhere the organism to the slide. Routinely used with bacteria and archaea. Heat fixation generally preserves overall morphology but not internal structures. Heat denatures the proteolytic enzyme and prevent autolysis. Heat fixation cannot be used in the capsular stain method as heat fixation will shrink or destroy the capsule (glycocalyx) and cannot be seen in stains.
Perfusion: Fixation via blood flow. The fixative is injected into the heart with the injection volume matching cardiac output. The fixative spreads through the entire body, and the tissue doesn't die until it is fixed. This has the advantage of preserving perfect morphology, but the disadvantages that the subject dies and the cost is high (because of the volume of fixative needed for larger organisms)
Immersion: The sample of tissue is immersed in fixative of volume at a minimum of 20 times greater than the volume of the tissue to be fixed. The fixative must diffuse through the tissue to fix, so tissue size and density, as well as type of fixative must be considered. Using a larger sample means it takes longer for the fixative to reach the deeper tissue. Best in a slight vacuum.
 Chemical Fixation
In this process, structures are preserved in a state (both chemically and structurally) as close to living tissue as possible. This requires a chemical fixative that can stabilise the proteins, nucleic acids and mucosubstances of the tissue by making them insoluble.
 Types of Chemical Fixatives
By far the most commonly used fixative in histology is formaldehyde. It is usually used as a 10% Neutral Buffered Formalin (NBF), that is approx. 3.7%-4.0% formaldehyde in phosphate buffered saline. Because formaldehyde is a gas at room temperature, formalin-formaldehyde gas dissolved in water (~37% w/v)-is used when making the former fixative. Paraformaldehyde is a polymerised form of formaldehyde, usually obtained as a fine white powder, which depolymerises back to formalin when heated. Formaldehyde fixes tissue by cross-linking the proteins, primarily the residues of the basic amino acid lysine. Its effects are reversible by excess water and it avoids formalin pigmentation. Other benefits include: Long term storage and good tissue penetration. It is particularly good for immunohistochemistry techniques. Also the formaldehyde vapour can be used as a fixative for cell smears.
Another popular aldehyde for fixation is glutaraldehyde. It operates in a similar way to formaldehyde by causing deformation of the alpha-helix structures in proteins. However glutaraldehyde is a larger molecule, and so its rate of diffusion across membranes is slower than formaldehyde. Consequently glutaraldehyde fixation on thicker tissue samples may be hampered, but this problem can be overcome by reducing the size of the tissue sample. One of the advantages of glutaraldehyde fixation is that it may offer a more rigid or tightly linked fixed product—its greater length and two aldehyde groups allow it to 'bridge' and link more distant pairs of protein molecules. It causes rapid and irreversible changes, fixes quickly, is well suited for electron microscopy, fixes well at 4oC, and gives best overall cytoplasmic and nuclear detail. However it is not ideal for immunohistochemistry staining.
Some fixation protocols call for a combination of formaldehyde and glutaraldehyde so that their respective strengths complement one another.
 Precipitating fixatives - Alcohols
Precipitating (or denaturing) fixatives act by reducing the solubility of protein molecules and (often) by disrupting the hydrophobic interactions that give many proteins their tertiary structure. The precipitation and aggregation of proteins is a very different process from the crosslinking that occurs with the aldehyde fixatives.
The most common precipitating fixatives are ethanol and methanol. They are commonly used to fix frozen sections and smears. Acetone is also used and has been shown to produce better histological preservation than frozen sections when employed in the Acetone Methylbenzoate Xylene (AMEX) technique.
The protein denaturants - methanol, ethanol and acetone - are rarely used alone for fixing blocks unless studying nucleic acids.
Acetic acid is a denaturant that is sometimes used in combination with the other precipitating fixatives, such as Davidson's AFA. The alcohols, by themselves, are known to cause considerable shrinkage and hardening of tissue during fixation while acetic acid alone is associated with tissue swelling; combining the two may result in better preservation of tissue morphology.
 Oxidising agents
The oxidising fixatives can react with various side chains of proteins and other biomolecules, allowing formation of crosslinks that stabilize tissue structure. However they cause extensive denaturation despite preserving fine cell structure and are used mainly as secondary fixatives.
Mercurials such as B-5 and Zenker's fixative have an unknown mechanism that increases staining brightness and give excellent nuclear detail. Despite being fast, mercurials penetrate poorly and produce tissue shrinkage. Their best application is for fixation of hematopoietic and reticuloendothelial tissues. Also note that since they contain mercury care must be taken with disposal.
Picrates penetrate tissue well to react with histones and basic proteins to form crystalline picrates with amino acids and precipitate all proteins. It is a good fixative for connective tissue, preserves glycogen well, and extracts lipids to give superior results to formaldehyde in immunostaining of biogenic and polypeptide hormones However, it causes a loss of basophilia unless the specimen is thoroughly washed following fixation.
 HOPE Fixative
Hepes-glutamic acid buffer-mediated organic solvent protection effect (HOPE) gives formalin-like morphology, excellent preservation of protein antigens for immunohistochemistry and enzyme histochemistry, good RNA and DNA yields and absence of crosslinking proteins.
 Frozen Sections
Small pieces of tissue (5×5×3mm) are placed in a cryoprotective embedding medium—OCT, TBS, or Cryogel—then snap frozen in isopentane cooled by liquid nitrogen. Tissue is then sectioned in a freezing microtome or cryostat. Sections are then fixed in one of the following fixatives: Absolute acetone for 10–15 minutes, 95% ethanol for 10–15 minutes or Absolute acetone 10 minutes followed by 95% ethanol 10 minutes
- Give better preservation of antigenicity
- Minimal exposure to fixative
- Not exposed to the organic solvents
- Much faster than other forms of fixations.
- Lack morphological detail
- Present a potential biohazard
 Target and Chemical Fixative Do's and Don'ts
|Target||Fixative of Choice||Fixative to Avoid|
|Proteins||Neutral Buffered Formalin, Paraformaldehyde||Osmium Tetroxide|
|Enzymes||Frozen Sections||Chemical Fixatives|
|Lipids||Frozen Sections*, Glutaraldehyde/Osmium Tetroxide||Alcoholic fixatives, Neutral Buffered Formalin|
|Nucleic Acids||Alcoholic fixatives, HOPE||Aldehyde fixatives|
|Mucopolysaccharides||Frozen Sections||Chemical fixatives|
|Biogenic Amines||Bouin Solution~, Neutral Buffered Formalin|
|Glycogen||Alcoholic based fixatives||Osmium Tetroxide|
- Frozen Sections preserve RNA and Lipids despite poor morphology. Compare to Paraffin sections, synonymous to Chemical Fixatives in the table, which destroy RNA and affect some antigens BUT give good morphology.
~ A picrate
 Factors Affecting Fixation
Should be kept in the physiological range, between pH 4-9. The pH for the ultrastructure preservation should be buffered between 7.2 to 7.4
Hypertonic solutions give rise to cell shrinkage.
Hypotonic solutions result in cell swelling and poor fixation.
10% neutral buffer formalin is 4% formaldehyde (1.33 osmolar) in PBS buffer (0.3 osmolar) sums to 1.63 osmolar. This is a very hypertonic solution yet it has worked well as a general tissue fixation condition for many years in pathology labs.
 Size of the Specimen
 Volume of the Fixative
At least 15-20 times greater than tissue volume
Increasing the temperature increases speed of fixation. However, care is required to avoid cooking the specimen. Fixation is routinely carried out at room temperature.
As a general rule 1hr per 1mm
 Time from Removal to Fixation
Fixation is a chemical process, and time must be allowed for the process to complete. Although "over fixation" can be detrimental, under-fixation has recently been appreciated as a significant problem and may be responsible for inappropriate results for some assays.
- Fixing specimens for making permanent slides
- Fixation strategies and formulations for immunohistochemical staining
- Carson, Freida L; Christa Hladik (2009). Histotechnology: A Self-Instructional Text (3 ed.). Hong Kong: American Society for Clinical Pathology Press. p. 2. ISBN 978-0-89189-581-7.
- Ryter A (1988). "Contribution of new cryomethods to a better knowledge of bacterial anatomy". Ann. Inst. Pasteur Microbiol. 139 (1): 33–44. doi:10.1016/0769-2609(88)90095-6. PMID 3289587.
- Friedrich, CL; D Moyles, TJ Beveridge, REW Hancock (2000). "Antibacterial Action of Structurally Diverse Cationic Peptides on Gram-Positive Bacteria". Antiomicrobial Agents and Chemotherapy 44 (8): 2086–2092. doi:10.1128/AAC.44.8.2086-2092.2000. PMC 90018. PMID 10898680.
- http://microvet.arizona.edu/research/aquapath/davidson.htm Davidson's AFA formulation at University of Arizona, Department of Veterinary Science and Microbiology website (accessed, Feb. 22, 2013)