International Defensive Pistol Association
|This article needs additional citations for verification. (April 2008)|
The International Defensive Pistol Association (IDPA), founded in 1996, is an organization based in Berryville, Arkansas, USA that has created a shooting sport based on defensive pistol techniques, using equipment including full-charge service ammunition to solve simulated "real world" self-defense scenarios. Shooters competing in defensive pistol events are required to use practical handguns and holsters that are deemed suitable for self-defense use.
The sport came about as a response to the perceived shortcomings in competitions organized by the International Practical Shooting Confederation (IPSC) and its migration away from the use of common, un-customized handguns. It was decided by the founders of IDPA (Bill Wilson, John Sayle, Ken Hackathorn, Dick Thomas, Walt Rauch and Larry Vickers), which included some of the founders of IPSC, that IPSC competitions had become too far removed from the reality of defensive shooting situations, using extensively modified guns, handmade ammunition, and speed-draw holsters that were impractical for self-defense. The IDPA founders believed that IPSC matches had become "equipment races," which were heavily dependent on a shooter's gear rather than their ability. That is, you had to have the latest gun, sighting equipment, and competition holster to be competitive.
- 1 Scoring
- 2 Equipment
- 3 See also
- 4 Notes and references
- 5 External links
Scoring at each match is based on the time taken to shoot the stage plus time added for any penalties accrued. Penalties are given for poor marksmanship (i.e. posting hits outside the targets' highest scoring area), failure to use cover, failure to follow a Safety Officer's directions, or any violation of IDPA rules. Penalties range from one-half second per dropped point on targets up to 20 seconds for a Failure to Do Right which is a blatant violation of IDPA rules - i.e. cheating or unsportsmanlike conduct.
Most IDPA stages are scored using Vickers Count which means that shooters may fire as many rounds as they feel necessary to make the specified number of hits. The best hits on the target are the only ones that count for score. If a stage calls for two hits on each target, a shooter may fire as many rounds as he feels necessary and no penalty will be given beyond the amount of time taken to make those shots. Only the best two hits will count.
On a standards stage (an exercise intended to test marksmanship and gun handling skill as opposed to being a scenario) it is common for the course of fire to specify Limited-Vickers scoring. On this type of stage, the shooter may fire no more than the number of rounds specified. Firing more rounds will earn a procedural penalty and only the lowest scoring hits on target, of the number specified in the course of fire, are counted. For example: a Limited-Vickers stage calls for two shots fired; the shooter fires one round into the -0 zone and one round into the -1 zone; dissatisfied with a less-than-perfect score they fire again, hitting the -0 zone; when the target is scored, only the -0 and -1 zone hits will count. The "make up" -0 shot will be thrown out (not because it is the make up, but because is a higher score and the rationale is there should be no possible advantage accrued from failing to follow the stage procedure) and the shooter will be assessed a procedural penalty for firing more shots than the course called for. In addition, the shooter will have also added to their score by taking the time to fire the extra round.
Originally the IDPA target was marked with two 5 point zones (head and eight inch circle in center), a 4 point zone (a polygonal box around the circle), and a 2 point zone (the outside periphery of the target). However since scoring is obtained not by calculating points obtained but by subtracting points dropped, the scoring zones came to reflect that system.
The current standard IDPA target is a cardboard humanoid shape with scoring zones perforated onto its surface. There are two areas marked as "-0" or "down zero" (the head and center-mass of the body represented by a circle, which has been moved up from its original position to be higher in the target body, thus more closely approximating the location of the heart and surrounding arteries) and one each marked "-1" and "-3."
Hit in each zone are added to the total points down. A target calling for two hits, with one hit in both the "-1" and "-3" zones would be scored as "-4" and called as "down-4." Only the shooter's best hits are scored unless a stage is specified as Limited Vickers Count. A Limited Vickers stage specifies the number of shots that can be taken at a target. Additional shots taken past the specified number results in a procedural penalty, in addition to which only the lowest-scoring shots are recorded.
A miss on a target is scored as down-5.
The points down are converted into time by multiplying by .5 (each point down incurs a half-second penalty) and added to the total time taken to shoot the stage.
A procedural penalty is a 3-second penalty given for breaking the rules of IDPA or failing to follow the directions of a course of fire.
Procedurals may be assessed by the safety officer for thing such as: • Failure to use cover. • Shooting targets in the wrong order. • Failure to follow the directions for the stage. • Leaving ammunition behind after performing a tactical reload (reload with retention).
Failure to Neutralize
A failure to neutralize is a 5-second penalty for not getting at least one shot within the down-0 or down-1 zones of a threat target. If a shooter lands only peripheral hits on the target, or misses the target altogether, the threat target is still considered viable and a potential threat to the shooter. This penalty does not apply in Limited Vickers stages or for targets that completely disappear.
Failure to Do Right
A failure to do right (FTDR) is a 20-second penalty given for any illegal action taken specifically to gain a competitive advantage. A shooter who deliberately fires extra rounds at a target so that he must reload at a more opportune time is a classic example of this penalty. This penalty can be highly subjective, and the SO has to determine that the shooter engaged in the action with a "guilty mind" - that he knowingly failed to do right. Because of the subjectivity of the call, the penalty is seldom given. Receiving one all but guarantees the shooter will lose the match, or at least place low in his or her division.
IDPA recognizes 5 divisions of competition, with different limitations for the firearms. Semi-automatic handguns must fit within a box 8 3/4" x 6" x 1 5/8". This is to help avoid a "race gun", as are several other rules. Note: In SSP, ESP, and CDP, the shooter will also start with one round in the chamber, unless the CoF description requires otherwise. (220.127.116.11.I IDPA Rulebook)
Stock Service Pistol (SSP)
- Double-action or safe action semi-automatic pistols
- Minimum cartridge is 9mm Parabellum.
- Power Factor of 125,000
- Minimal modifications are permitted.
Enhanced Service Pistol (ESP)
- Single-action pistols. Handguns that are legal for SSP may also be used in ESP.
- Permitted modifications include custom serrations and checkering, as well as the addition of magwells to the grip of the gun.
- Power Factor of 125,000
Custom Defensive Pistol (CDP)
- Pistols chambered for .45 ACP
- Power Factor of 165,000
- Competitors may only load 8 rounds in the gun, although firearms with a capability for a higher capacity are allowed
- The class was originally intended for owners of the M1911, but other models of .45 ACP pistols have become common
Stock Service Revolver (SSR)
- Revolvers of .38 caliber or larger
- Rimmed cartridges only and the firearm may only be reloaded by use of a speedloader
- Power Factor of 105,000
- Maximum barrel length is 4.2"
- Competitors may only load 6 rounds in the gun, although revolvers with a capability for a higher capacity are allowed
Enhanced Service Revolver (ESR)
- Revolvers of 9mm or larger
- Power Factor of 165,000
- Rimless and rimmed cartridges are permitted
- Competitor may utilize moon clips or speedloaders for reloading
- Barrel length and capacity limits are the same as in SSR.
- A strong-side holster is required
- Holster must hold the firearm with enough tension to allow the wearer to complete normal daily tasks without fear of losing the weapon
- Except for law enforcement officers competing using their duty equipment, the holster must be concealable
- Shoulder, ankle, or cross-draw holsters are not allowed due to safety concerns
- Shooting sports
- International Practical Shooting Confederation
- United States Practical Shooting Association
Arranging IDPA matches
- Shoot'n Score It - free web based IDPA, USPSA, Steel Challenge, SASS/CAS and PPC/Wa1500 match and scoring service
Notes and references
- "Equipment and Competition Rules of the International Defensive Pistol Association, Inc.". 2005-04-15. Retrieved 2007-04-17. Depending on the division, limits can be 10, 8, or 5 rounds for semi-automatics (plus one in the chamber), and 6 for revolvers.
- At the time IDPA was founded, U.S. federal law restricted the capacity of newly manufactured magazines to 10 rounds. Although that law has since expired at the federal level, IDPA maintains this restriction.