An image processor, image processing engine, also called media processor, is a specialized digital signal processor used for image processing in digital cameras, mobile phones or other devices. Often it is a system on a chip with multi-processor / multi-core processor architecture, using parallel computing even with SIMD or MIMD technologies to increase speed and efficiency.
The digital image processing engine can perform a range of tasks.
The photodiodes employed in an image sensor are colour-blind by nature: they can only record shades of grey. To get colour into the picture, they are covered with different colour filters: red, green and blue (RGB) according to the pattern designated by the Bayer filter - named after its inventor. As each photodiode records the colour information for exactly one pixel of the image, without an image processor there would be a green pixel next to each red and blue pixel. (Actually, with most sensors there are two green for each blue and red diodes.)
This process, however, is quite complex and involves a number of different operations. Its quality depends largely on the effectiveness of the algorithms applied to the raw data coming from the sensor. The mathematically manipulated data becomes the photo file recorded.
As stated above, the image processor evaluates the colour and brightness data of a given pixel, compares them with the data from neighbouring pixels and then uses a demosaicing algorithm to produce an appropriate colour and brightness value for the pixel. The image processor also assesses the whole picture to guess at the correct distribution of contrast. By adjusting the gamma value (heightening or lowering the contrast range of an image's mid-tones) subtle tonal gradations, such as in human skin or the blue of the sky, become much more realistic.
Noise is a phenomenon found in any electronic circuitry. In digital photography its effect is often visible as random spots of obviously wrong colour in an otherwise smoothly-coloured area. Noise increases with temperature and exposure times. When higher ISO settings are chosen the electronic signal in the image sensor is amplified, which at the same time increases the noise level, leading to a lower signal-to-noise ratio. The image processor attempts to separate the noise from the image information and to remove it. This can be quite a challenge, as the image may contain areas with fine textures which, if treated as noise, may lose some of their definition.
As the color and brightness values for each pixel are interpolated some image softening is applied to even out any fuzziness that has occurred. To preserve the impression of depth, clarity and fine details, the image processor must sharpen edges and contours. It therefore must detect edges correctly and reproduce them smoothly and without over-sharpening.
Image processor users are using industry standard products, application-specific standard products (ASSP) or even application-specific integrated circuits (ASIC) with trade names: Canon's is called DIGIC, Nikon's EXPEED, Olympus' TruePic, Panasonic's VENUS Engine and Sony's BIONZ. Some are known to be based on the Fujitsu Milbeaut, the Texas Instruments OMAP, Panasonic MN103, Zoran Coach, Altek Sunny or Sanyo image/video processors.
Processor brand names
- Canon - DIGIC (based on Texas Instruments OMAP)
- Casio - EXILIM engine
- Epson - EDiART
- Fujifilm - Real Photo Engine
- Konica Minolta - SUPHEED
- Leica - MAESTRO (based on Fujitsu Milbeaut)
- Nikon - EXPEED (based on Fujitsu Milbeaut)
- Olympus - TruePic (based on Panasonic MN103/MN103S)
- Panasonic - Venus engine (based on Panasonic MN103/MN103S)
- Pentax - PRIME (Pentax Real IMage Engine) (newer variants based on Fujitsu Milbeaut)
- Ricoh - GR engine ( GR digital ), Smooth Imaging Engine
- Samsung - DRIMe (based on Samsung Exynos)
- Sanyo - Platinum engine
- Sigma - True (newer variants based on Fujitsu Milbeaut)
- Sharp - ProPix
- Sony - BIONZ
- HTC - ImageSense
With the ever higher pixel count in image sensors, the image processor's speed becomes more critical: photographers don't want to wait for the camera's image processor to complete its job before they can carry on shooting - they don't even want to notice some processing is going on inside the camera. Therefore, image processors must be optimised to cope with more data in the same or even a shorter period of time.