Anti-submarine indicator loop

From Wikipedia, the free encyclopedia
  (Redirected from Indicator loop)
Jump to: navigation, search

An anti-submarine indicator loop was a submerged cable laid on the sea bed and used to detect the passage of enemy submarines. Developed by the Royal Navy during World War I, they were extensively used by the Allies during World War II to protect harbours against submarine attack.[1]

They worked as induction loops – the submarine's magnetism induced a current in the cable as the submarine passed across it. The technology was first developed and trialled at the British Admiralty's Board of Investigation and Research at Harwich on the Essex coast in England. The first operational use was at the Grand Fleet's anchorage at Scapa Flow. The German submarine UB-116 was detected by hydrophones at 21:21 on 28 October 1918 attempting to enter the harbour and anchorage via Hoxa Sound. Two hours later (at 23:32) current was detected in an indicator loop laid in a remotely controlled minefield, induced by the submarine as it passed over the cables. Mines around the loop were detonated by remote control, sinking the submarine.[2] It was the last U-boat destroyed by enemy action before the Armistice.[3] After the war, indicator loop devices were further developed by the Admiralty's research divisions at HMS Vernon and HMS Osprey (Portland Naval Base). In WWII indicator loops were used by the Allies for harbour defence in the UK and its dominions and protectorates, as well as by the US Navy.[4]

References[edit]

  1. ^ "What are Indicator Loops and how do they work?". Indicatorloops.com. Retrieved 2008-06-10. 
  2. ^ Lecane, Philip (2005). Torpedoed! The R.M.S. Leinster Disaster. Periscope Publishing Ltd. p. 92. ISBN 1-904381-29-4. 
  3. ^ "UB.116". Submerged - Shipwrecks And Scuba Diving Around Devon And The World. Retrieved 2008-06-10. 
  4. ^ "Indicator Loops around the World". Indicatorloops.com. Archived from the original on 25 February 2009. Retrieved 2009-03-01.