Instructional Design (also called Instructional Systems Design (ISD)) is the practice of creating "instructional experiences which make the acquisition of knowledge and skill more efficient, effective, and appealing." The process consists broadly of determining the current state and needs of the learner, defining the end goal of instruction, and creating some "intervention" to assist in the transition. Ideally the process is informed by pedagogically (process of teaching) and andragogically (adult learning) tested theories of learning and may take place in student-only, teacher-led or community-based settings. The outcome of this instruction may be directly observable and scientifically measured or completely hidden and assumed. There are many instructional design models but many are based on the ADDIE model with the five phases: analysis, design, development, implementation, and evaluation. As a field, instructional design is historically and traditionally rooted in cognitive and behavioral psychology, though recently Constructivism (learning theory) has influenced thinking in the field.
- 1 History
- 1.1 Origins
- 1.2 1946 – Edgar Dale’s Cone of Experience
- 1.3 Mid-1950s through mid-1960s - The Programmed Instruction Movement
- 1.4 Early 1960s - The Criterion-Referenced Testing Movement
- 1.5 1965 - Domains of Learning, Events of Instruction, and Hierarchical Analysis
- 1.6 1967 - Formative Evaluation
- 1.7 The 1970s - Growing of Interest in the Systems Approach
- 1.8 The 1980s - Introduction of Personal Computers into the Design Process
- 1.9 The 1990s - A Growing Interest in Constructivist Theory and the Importance of Performance
- 1.10 The 2000s - Rise of the Internet and Online Learning
- 1.11 2010 and forward
- 2 Instructional Media History
- 3 Cognitive load theory and the design of instruction
- 4 Gagné's Theory of Instruction
- 5 Learning design
- 6 Instructional design models
- 7 Motivational Design
- 8 Influential researchers and theorists
- 9 See also
- 10 References
- 11 External links
During World War II, a considerable amount of training materials for the military were developed based on the principles of instruction, learning, and human behavior. Tests for assessing a learner’s abilities were used to screen candidates for the training programs. After the success of military training, psychologists began to view training as a system, and developed various analysis, design, and evaluation procedures.
1946 – Edgar Dale’s Cone of Experience
- In 1946, Dale outlined a hierarchy of instructional methods and their effectiveness.
Mid-1950s through mid-1960s - The Programmed Instruction Movement
- In B. F. Skinner’s 1954 article “The Science of Learning and the Art of Teaching”, he stated that effective instructional materials, called programmed instructional materials, should include small steps, frequent questions, immediate feedback, and allow self-pacing.
- The Popularization of Behavioral Objectives - Robert Mager popularized the use of learning objectives with his 1962 article “Preparing Objectives for Programmed Instruction”. In the article, he describes how to write objectives including desired behavior, learning condition, and assessment.
- In 1956, a committee led by Benjamin Bloom published an influential taxonomy of what he termed the three domains of learning: Cognitive (what one knows or thinks), Psychomotor (what one does, physically) and Affective (what one feels, or what attitudes one has). These taxonomies still influence the design of instruction.
Early 1960s - The Criterion-Referenced Testing Movement
- Robert Glaser first used the term “criterion-referenced measures” in 1962. In contrast to norm-referenced tests in which an individual's performance is compared to group performance, a criterion-referenced test is designed to test an individual's behavior in relation to an objective standard. It can be used to assess the learners’ entry level behavior, and to what extent learners have developed mastery through an instructional program.
1965 - Domains of Learning, Events of Instruction, and Hierarchical Analysis
- In 1965, Robert Gagne (see below for more information) described three domains of learning outcomes (Cognitive, Affective, Psychomotor), five learning outcomes (Verbal Information, Intellectual Skills, Cognitive Strategy, Attitude, Motor Skills), and nine events of instruction in “The conditions of Learning”, which remain foundations of instructional design practices.
- Gagne’s work in learning hierarchies and hierarchical analysis led to an important notion in instruction – to ensure that learners acquire prerequisite skills before attempting superordinate’s ones.
1967 - Formative Evaluation
- In 1967, after analyzing the failure of training material, Michael Scriven suggested the need for formative assessment – e.g., to try out instructional materials with learners (and revise accordingly) before declaring them finalized.
The 1970s - Growing of Interest in the Systems Approach
- During the 1970s, the number of instructional design models greatly increased and prospered in different sectors in military, academia, and industry. Many instructional design theorists began to adopt an information-processing-based approach to the design of instruction. David Merrill for instance developed Component Display Theory (CDT), which concentrates on the means of presenting instructional materials (presentation techniques).
The 1980s - Introduction of Personal Computers into the Design Process
- During this decade, while interest in instructional design continued to be strong in business and the military, there was little evolution of ID in schools or higher education.
- This was the era, however, when educators and researchers began to consider how the personal computer could be used in an educational environment and efforts began to design instruction that utilized this new tool. PLATO (Programmed Logic for Automatic Teaching Operation) is one example of how computers began to be integrated into instruction. Many of the first uses of computers in the classroom were for “drill and skill” exercises. Computer-based educational games and simulations also became popular.
- This was also the time when there was a growing interest in how cognitive psychology could be applied to instructional design. In the late 1980s and throughout the 1990s, cognitive load theory began to find empirical support for a variety of presentation techniques.
The 1990s - A Growing Interest in Constructivist Theory and the Importance of Performance
- As constructivist theory began to gain traction, its influence on instructional design became more prominent as a counterpoint to the more traditional cognitive learning theory. Constructivists believe that learning experiences should be “authentic” and produce real-world learning environments that allow the learner to construct their own knowledge. This emphasis on the learner was a significant departure away from traditional forms of instructional design.
- Another trend that surfaced during this period was the recognition of performance improvement as being an important outcome of learning that needed to be considered during the design process.
- The World Wide Web is developed and begins to surface as a potential online learning tool with hypertext and hypermedia being recognized as good tools for e-learning.
- As technology advanced and constructivist theory gained popularity, technology’s use in the classroom began to evolve from mostly drill and skill exercises to more interactive activities that required more complex thinking on the part of the learner.
- Rapid prototyping was first seen during the 1990s. In this process, an instructional design project is prototyped quickly and then vetted through a series of try and revise cycles. This is a big departure from traditional methods of instructional design that took far longer to complete.
The 2000s - Rise of the Internet and Online Learning
- The Internet, with its social media tools and multitudes of information resources, became a very popular tool for online learning, and instructional designers recognized the need to integrate e-learning into the creation of learning objects and curricula.
- There is a great increase in the number of online courses offered by higher education institutions.
- Technology advanced to the point that sophisticated simulations were now readily available to learners, thus providing more authentic and realistic learning experiences.
2010 and forward
- The influence of e-tools continues to grow and has seemingly encouraged the growth of informal learning throughout a person’s lifetime. The challenge for instructional designers is how to create learning opportunities that now may occur anywhere and anytime.
Instructional Media History
|1900s||Visual media||School museum as supplementary material (First school museum opened in St. Louis in 1905)||Materials are viewed as supplementary curriculum materials. District-wide media center is the modern equivalent.|
|1914-1923||Visual media films, Slides, Photographer||Visual Instruction Movement||The impact of visual instruction was limited because of teacher resistance to change, quality of the file and cost etc.|
|Mid 1920s to 1930s||Radio broadcasting, Sound recordings, Sound motion pictures||Radio Audiovisual Instruction movement||Education in large was not impacted.|
|World War II||Training films, Overhead projector, Slide projector, Audio equipment, Simulators and training devices||Military and industry at this time had strong demand for training.||Growth of audio-visual instruction movement in school was slow, but audiovisual device were used extensively in military services and industry.|
|Post World War II||Communication medium||Suggested to consider all aspects of a communication process (influenced by communication theories).||This view point was first ignored, but eventually helped to expand the focus of the audiovisual movement.|
|1950s to mid-1960s||Television||Growth of Instructional television||Instructional television was not adopted to a greater extent.|
|1950s-1990s||Computer||Computer-assisted instruction (CAI) research started in the 1950s, became popular in the 1980s a few years after computers became available to general public.||The impact of CAI was rather small and the use of computer was far from innovative.|
|1990s-2000s||Internet, Simulation||The internet offered opportunities to train many people long distances. Desktop simulation gave advent to levels of Interactive Multimedia Instruction (IMI).||Online training increased rapidly to the point where entire curriculums were given through web-based training. Simulations are valuable but expensive, with the highest level being used primarily by the military and medical community.|
|2000s-2010s||Mobile Devices, Social Media||On-demand training moved to people's personal devices; social media allowed for collaborative learning.||The impact from both are too new to be measured.|
Cognitive load theory and the design of instruction
Cognitive load theory developed out of several empirical studies of learners, as they interacted with instructional materials. Sweller and his associates began to measure the effects of working memory load, and found that the format of instructional materials has a direct effect on the performance of the learners using those materials.
While the media debates of the 1990s focused on the influences of media on learning, cognitive load effects were being documented in several journals. Rather than attempting to substantiate the use of media, these cognitive load learning effects provided an empirical basis for the use of instructional strategies. Mayer asked the instructional design community to reassess the media debate, to refocus their attention on what was most important: learning.
By the mid- to late-1990s, Sweller and his associates had discovered several learning effects related to cognitive load and the design of instruction (e.g. the split attention effect, redundancy effect, and the worked-example effect). Later, other researchers like Richard Mayer began to attribute learning effects to cognitive load. Mayer and his associates soon developed a Cognitive Theory of Multimedia Learning.
In the past decade, cognitive load theory has begun to be internationally accepted and begun to revolutionize how practitioners of instructional design view instruction. Recently, human performance experts have even taken notice of cognitive load theory, and have begun to promote this theory base as the science of instruction, with instructional designers as the practitioners of this field. Finally Clark, Nguyen and Sweller published a textbook describing how Instructional Designers can promote efficient learning using evidence-based guidelines of cognitive load theory.
Instructional Designers use various instructional strategies to reduce cognitive load. For example, they think that the onscreen text should not be more than 150 words or the text should be presented in small meaningful chunks.. Design of activities to engage learners follow concepts such as chronogogy (time-lead) learning design for online education to help facilitate learning activities around learner's schedules and access behaviour on online environments. The designers also use auditory and visual methods to communicate information to the learner.
Gagné's Theory of Instruction
Gagné's instructional theory is widely used in the design of instruction by instructional designers in many settings, and its continuing influence in the field of educational technology can be seen in the more than 130 times that Gagné has been cited in prominent journals in the field during the period from 1985 through 1990. Synthesizing ideas from behaviorism and cognitivism, he provides a clear template, which is easy to follow for designing instructional events. Instructional designers who follow Gagné's theory will likely have tightly focused, efficient instruction.
Overview of Gagné’s instructional theory
A taxonomy of Learning Outcomes
Robert Gagné classified the types of learning outcomes. To identify the types of learning, Gagné asked how learning might be demonstrated. These can be related to the domains of learning, as follows:
- Cognitive Domain
- Verbal information - is stated
- Intellectual skills - label or classify the concepts
- Intellectual skills - to apply the rules and principles
- Intellectual skills - problem solving allows generating solutions or procedures
- Cognitive strategies - are used for learning
- Affective Domain
- Attitudes - are demonstrated by preferring options
- Psychomotor Domain
- Motor skills - enable physical performance
Types of Learning Outcomes
Gagné, & Driscoll elaborated on the types of learning outcomes with a set of corresponding standard verbs:
- Verbal Information: state, recite, tell, declare
- Intellectual Skills
- Discrimination: discriminate, distinguish, differentiate
- Concrete Concept: identify, name, specify, label
- Defined Concept: classify, categorize, type, sort (by definition)
- Rule: demonstrate, show, solve (using one rule)
- Higher Order Rule: generate, develop, solve (using two or more rules)
- Cognitive Strategy: adopt, create, originate
- Attitude: choose, prefer, elect, favor
- Motor Skill: execute, perform, carry out
The Nine Events of Instruction (as Conditions of Learning)
According to Gagné, learning occurs in a series of learning events. Each learning event must be accomplished before the next in order for learning to take place. Similarly, instructional events should mirror the learning events:
- Gaining attention: To ensure reception of coming instruction, the teacher gives the learners a stimulus. Before the learners can start to process any new information, the instructor must gain the attention of the learners. This might entail using abrupt changes in the instruction.
- Informing learners of objectives: The teacher tells the learner what they will be able to do because of the instruction. The teacher communicates the desired outcome to the group.
- Stimulating recall of prior learning: The teacher asks for recall of existing relevant knowledge.
- Presenting the stimulus: The teacher gives emphasis to distinctive features.
- Providing learning guidance: The teacher helps the students in understanding (semantic encoding) by providing organization and relevance.
- Eliciting performance: The teacher asks the learners to respond, demonstrating learning.
- Providing feedback: The teacher gives informative feedback on the learners' performance.
- Assessing performance: The teacher requires more learner performance, and gives feedback, to reinforce learning.
- Enhancing retention and transfer: The teacher provides varied practice to generalize the capability.
Some educators believe that Gagné's taxonomy of learning outcomes and events of instruction oversimplify the learning process by over-prescribing. However, using them as part of a complete instructional package can assist many educators in becoming more organized and staying focused on the instructional goals.
Gagné's Influence on Instructional Design Theorists
Robert Gagné’s work has been the foundation of instructional design since the beginning of the 1960s when he conducted research and developed training materials for the military. Among the first to coin the term “instructional design”, Gagné developed some of the earliest instructional design models and ideas. These models have laid the groundwork for more present-day instructional design models from theorists like Dick, Carey, and Carey (The Dick and Carey Systems Approach Model), Jerold Kemp’s Instructional Design Model, and David Merrill (Merrill’s First Principle of Instruction). Each of these models are based on a core set of learning phases that include (1) activation of prior experience, (2) demonstration of skills, (3) application of skills, and (4) integration or these skills into real world activities. The figure below illustrates these five ideas.
Gagné's main focus for instructional design was how instruction and learning could be systematically connected to the design of instruction. He emphasized the design principles and procedures that need to take place for effective teaching and learning. His initial ideas, along with the ideas of other early instructional designers, can be summed up in Psychological Principles in Systematic Development which was written by Roberts B. Miller and edited by Gagné. Gagné believed in internal learning and motivation which paved the way for theorists like Merrill, Li, and Jones who designed the Instructional Transaction Theory, Reigeluth and Stein’s Elaboration Theory, and most notably, Keller’s ARCS Model of Motivation and Design (see below).
Gagné's Influence on Education Today
Prior to Robert Gagné, learning was often thought of as a single, uniform process. There was little or no distinction made between “learning to load a rifle and learning to solve a complex mathematical problem”. Gagné offered an alternative view which developed the idea that different learners required different learning strategies. Understanding and designing instruction based on a learning style defined by the individual brought about new theories and approaches to teaching. Gagné 's understanding and theories of human learning added significantly to understanding the stages in cognitive processing and instructions. For example, Gagné argued that instructional designers must understand the characteristics and functions of short-term and long-term memory to facilitate meaningful learning. This idea encouraged instructional designers to include cognitive needs as a top-down instructional approach.
Gagné (1966) defines curriculum as a sequence of content units arranged in such a way that the learning of each unit may be accomplished as a single act, provided the capabilities described by specified prior units (in the sequence) have already been mastered by the learner.
His definition of curriculum has been the basis of many important initiatives in schools and other educational environments. In the late 1950s and early 1960s, Gagné had expressed and established an interest in applying theory to practice with particular interest in applications for teaching, training and learning. Increasing the effectiveness and efficiency of practice was of particular concern. His ongoing attention to practice while developing theory continues to have an impact on education and training.
Gagné's work has had a significant influence on American education, and military and industrial training. Gagné was one of the early developers of the concept of instructional systems design which suggests the components of a lesson can be analyzed and should be designed to operate together as an integrated plan for instruction. In "Educational Technology and the Learning Process" (Educational Researcher, 1974), Gagné defined instruction as "the set of planned external events which influence the process of learning and thus promote learning.".
The concept of learning design arrived in the literature of technology for education in the late 1990s and early 2000s with the idea that "designers and instructors need to choose for themselves the best mixture of behaviourist and constructivist learning experiences for their online courses". But the concept of learning design is probably as old as the concept of teaching. Learning design might be defined as "the description of the teaching-learning process that takes place in a unit of learning (eg, a course, a lesson or any other designed learning event)".
As summarized by Britain, learning design may be associated with:
- The concept of learning design
- The implementation of the concept made by learning design specifications like PALO, IMS Learning Design, LDL, SLD 2.0, etc.
- The technical realisations around the implementation of the concept like TELOS, RELOAD LD-Author, etc.
Instructional design models
Perhaps the most common model used for creating instructional materials is the ADDIE Model. This acronym stands for the 5 phases contained in the model (Analyze, Design, Develop, Implement, and Evaluate).
Brief History of ADDIE’s Development – The ADDIE model was initially developed by Florida State University to explain “the processes involved in the formulation of an instructional systems development (ISD) program for military interservice training that will adequately train individuals to do a particular job and which can also be applied to any interservice curriculum development activity.” The model originally contained several steps under its five original phases (Analyze, Design, Develop, Implement, and [Evaluation and] Control), whose completion was expected before movement to the next phase could occur. Over the years, the steps were revised and eventually the model itself became more dynamic and interactive than its original hierarchical rendition, until its most popular version appeared in the mid-80s, as we understand it today.
The five phases are listed and explained below:
Analyze – The first phase of content development is Analysis. Analysis refers to the gathering of information about one’s audience, the tasks to be completed, how the learners will view the content, and the project’s overall goals. The instructional designer then classifies the information to make the content more applicable and successful.
Design – The second phase is the Design phase. In this phase, instructional designers begin to create their project. Information gathered from the analysis phase, in conjunction with the theories and models of instructional design, is meant to explain how the learning will be acquired. For example, the design phase begins with writing a learning objective. Tasks are then identified and broken down to be more manageable for the designer. The final step determines the kind of activities required for the audience in order to meet the goals identified in the Analyze phase.
Develop – The third phase, Development, involves the creation of the activities that will be implemented. It is in this stage that the blueprints of the design phase are assembled.
Implement – After the content is developed, it is then Implemented. This stage allows the instructional designer to test all materials to determine if they are functional and appropriate for the intended audience.
Evaluate – The final phase, Evaluate, ensures the materials achieved the desired goals. The evaluation phase consists of two parts: formative and summative assessment. The ADDIE model is an iterative process of instructional design, which means that at each stage the designer can assess the project's elements and revise them if necessary. This process incorporates formative assessment, while the summative assessments contain tests or evaluations created for the content being implemented. This final phase is vital for the instructional design team because it provides data used to alter and enhance the design.
Connecting all phases of the model are external and reciprocal revision opportunities. As in the internal Evaluation phase, revisions should and can be made throughout the entire process.
Most of the current instructional design models are variations of the ADDIE process.
An adaptation of the ADDIE model, which is used sometimes, is a practice known as rapid prototyping.
Proponents suggest that through an iterative process the verification of the design documents saves time and money by catching problems while they are still easy to fix. This approach is not novel to the design of instruction, but appears in many design-related domains including software design, architecture, transportation planning, product development, message design, user experience design, etc. In fact, some proponents of design prototyping assert that a sophisticated understanding of a problem is incomplete without creating and evaluating some type of prototype, regardless of the analysis rigor that may have been applied up front. In other words, up-front analysis is rarely sufficient to allow one to confidently select an instructional model. For this reason many traditional methods of instructional design are beginning to be seen as incomplete, naive, and even counter-productive.
However, some consider rapid prototyping to be a somewhat simplistic type of model. As this argument goes, at the heart of Instructional Design is the analysis phase. After you thoroughly conduct the analysis—you can then choose a model based on your findings. That is the area where most people get snagged—they simply do not do a thorough-enough analysis. (Part of Article By Chris Bressi on LinkedIn)
Dick and Carey
Another well-known instructional design model is The Dick and Carey Systems Approach Model. The model was originally published in 1978 by Walter Dick and Lou Carey in their book entitled The Systematic Design of Instruction.
Dick and Carey made a significant contribution to the instructional design field by championing a systems view of instruction, in contrast to defining instruction as the sum of isolated parts. The model addresses instruction as an entire system, focusing on the interrelationship between context, content, learning and instruction. According to Dick and Carey, "Components such as the instructor, learners, materials, instructional activities, delivery system, and learning and performance environments interact with each other and work together to bring about the desired student learning outcomes". The components of the Systems Approach Model, also known as the Dick and Carey Model, are as follows:
- Identify Instructional Goal(s): A goal statement describes a skill, knowledge or attitude (SKA) that a learner will be expected to acquire
- Conduct Instructional Analysis: Identify what a learner must recall and identify what learner must be able to do to perform particular task
- Analyze Learners and Contexts: Identify general characteristics of the target audience, including prior skills, prior experience, and basic demographics; identify characteristics directly related to the skill to be taught; and perform analysis of the performance and learning settings.
- Write Performance Objectives: Objectives consists of a description of the behavior, the condition and criteria. The component of an objective that describes the criteria will be used to judge the learner's performance.
- Develop Assessment Instruments: Purpose of entry behavior testing, purpose of pretesting, purpose of post-testing, purpose of practive items/practive problems
- Develop Instructional Strategy: Pre-instructional activities, content presentation, Learner participation, assessment
- Develop and Select Instructional Materials
- Design and Conduct Formative Evaluation of Instruction: Designers try to identify areas of the instructional materials that need improvement.
- Revise Instruction: To identify poor test items and to identify poor instruction
- Design and Conduct Summative Evaluation
With this model, components are executed iteratively and in parallel, rather than linearly.
Instructional Development Learning System (IDLS)
Another instructional design model is the Instructional Development Learning System (IDLS). The model was originally published in 1970 by Peter J. Esseff, PhD and Mary Sullivan Esseff, PhD in their book entitled IDLS—Pro Trainer 1: How to Design, Develop, and Validate Instructional Materials.
Peter (1968) & Mary (1972) Esseff both received their doctorates in Educational Technology from the Catholic University of America under the mentorship of Dr. Gabriel Ofiesh, a founding father of the Military Model mentioned above. Esseff and Esseff synthesized existing theories to develop their approach to systematic design, "Instructional Development Learning System" (IDLS).
Also see: Managing Learning in High Performance Organizations, by Ruth Stiehl and Barbara Bessey, from The Learning Organization, Corvallis, Oregon. ISBN 0-9637457-0-0.
The components of the IDLS Model are the following:
- Design a task analysis
- Develop criterion tests and performance measures
- Develop interactive instructional materials
- Validate the interactive instructional materials
Other instructional design models
Other useful instructional design models include: the Smith/Ragan Model, the Morrison/Ross/Kemp Model and the OAR Model of instructional design in higher education, as well as, Wiggins' theory of backward design.
Learning theories also play an important role in the design of instructional materials. Theories such as behaviorism, constructivism, social learning and cognitivism help shape and define the outcome of instructional materials.
Motivation is defined as an internal drive that activates behavior and gives it direction. The term motivation theory is concerned with the process that describe why and how human behavior is activated and directed.
Motivation Concepts Intrinsic and Extrinsic Motivation
- Instrinsic: defined as the doing of an activity for its inherent satisfactions rather than for some separable consequence. When intrinsically motivated a person is moved to act for the fun or challenge entailed rather than because of external rewards. Intrinsic motivation reflects the desire to do something because it is enjoyable. If we are intrinsically motivated, we would not be worried about external rewards such as praise.
- Examples: Writing short stories because you enjoy writing them, reading a book because you are curious about the topic, and playing chess because you enjoy effortful thinking
- Extrinsic: reflects the desire to do something because of external rewards such as awards, money and praise. People who are extrinsically motivated may not enjoy certain activities. They may only wish to engage in certain activities because they wish to receive some external reward.
- Examples: The writer who only writes poems to be submitted to poetry contests, a person who dislikes sales but accepts a sales position because he/she desires to earn an above average salary, and a person selecting a major in college based on salary and prestige, rather than personal interest.
John Keller has devoted his career to researching and understanding motivation in instructional systems. These decades of work constitute a major contribution to the instructional design field. First, by applying motivation theories systematically to design theory. Second, in developing a unique problem-solving process he calls the ARCS Motivation.
The ARCS Model of Motivational Design
The ARCS Model of Motivational Design was created by John Keller while he was researching ways to supplement the learning process with motivation. The model is based on Tolman's and Lewin's expectancy-value theory, which presumes that people are motivated to learn if there is value in the knowledge presented (i.e. it fulfills personal needs) and if there is an optimistic expectation for success. The model consists of four main areas: Attention, Relevance, Confidence, and Satisfaction.
Attention and relevance according to John Keller's ARCS motivational theory are essential to learning. The first 2 of 4 key components for motivating learners, attention and relevance can be considered the backbone of the ARCS theory, the latter components relying upon the former.
Attention: The attention mentioned in this theory refers to the interest displayed by learners in taking in the concepts/ideas being taught. This component is split into three categories: perceptual arousal, using surprise or uncertain situations; inquiry arousal, offering challenging questions and/or problems to answer/solve; and variability, using a variety of resources and methods of teaching. Within each of these categories, John Keller has provided further sub-divisions of types of stimuli to grab attention. Grabbing attention is the most important part of the model because it initiates the motivation for the learners. Once learners are interested in a topic, they are willing to invest their time, pay attention, and find out more.
Relevance: Relevance, according to Keller, must be established by using language and examples that the learners are familiar with. The three major strategies John Keller presents are goal oriented, motive matching, and familiarity. Like the Attention category, John Keller divided the three major strategies into subcategories, which provide examples of how to make a lesson plan relevant to the learner. Learners will throw concepts to the wayside if their attention cannot be grabbed and sustained and if relevance is not conveyed.
Confidence: The confidence aspect of the ARCS model focuses on establishing positive expectations for achieving success among learners. The confidence level of learners is often correlated with motivation and the amount of effort put forth in reaching a performance objective. For this reason, it’s important that learning design provides students with a method for estimating their probability of success. This can be achieved in the form of a syllabus and grading policy, rubrics, or a time estimate to complete tasks. Additionally, confidence is built when positive reinforcement for personal achievements is given through timely, relevant feedback.
Satisfaction: Finally, learners must obtain some type of satisfaction or reward from a learning experience. This satisfaction can be from a sense of achievement, praise from a higher-up, or mere entertainment. Feedback and reinforcement are important elements and when learners appreciate the results, they will be motivated to learn. Satisfaction is based upon motivation, which can be intrinsic or extrinsic. To keep learners satisfied, instruction should be designed to allow them to use their newly learned skills as soon as possible in as authentic a setting as possible.
Motivating Opportunities Model
Although Keller’s ARCS model currently dominates instructional design with respect to learner motivation, in 2006 Hardré and Miller proposed a need for a new design model that includes current research in human motivation, a comprehensive treatment of motivation, integrates various fields of psychology and provides designers the flexibility to be applied to a myriad of situations.
Hardré proposes an alternate model for designers called the Motivating Opportunities Model or MOM. Hardré’s model incorporates cognitive, needs, and affective theories as well as social elements of learning to address learner motivation. MOM has seven key components spelling the acronym ‘SUCCESS’- Situational, Utilization, Competence, Content, Emotional, Social, and Systemic.
Influential researchers and theorists
||This article contains embedded lists that may be poorly defined, unverified or indiscriminate. (December 2010)|
Alphabetic by last name
- Bloom, Benjamin – Taxonomies of the cognitive, affective, and psychomotor domains – 1955
- Bonk, Curtis – Blended learning – 2000s
- Bransford, John D. – How People Learn: Bridging Research and Practice – 1999
- Bruner, Jerome – Constructivism
- Carey, L. – "The Systematic Design of Instruction"
- Clark, Richard – Clark-Kozma "Media vs Methods debate", "Guidance" debate.
- Clark, Ruth – Efficiency in Learning: Evidence-Based Guidelines to Manage Cognitive Load / Guided Instruction / Cognitive Load Theory
- Dick, W. – "The Systematic Design of Instruction"
- Gagné, Robert M. – Nine Events of Instruction (Gagné and Merrill Video Seminar)
- Hannum, Wallace H., Professor, UNC-Chapel Hill – numerous articles and books; search via Google and Google Scholar
- Heinich, Robert – Instructional Media and the new technologies of instruction 3rd ed. – Educational Technology – 1989
- Jonassen, David – problem-solving strategies – 1990s
- Langdon, Danny G – The Instructional Designs Library: 40 Instructional Designs, Educational Tech. Publications
- Mager, Robert F. – ABCD model for instructional objectives – 1962 - Criterion Referenced Instruction and Learning Objectives
- Marzano, Robert J. - "Dimensions of Learning", Formative Assessment
- Mayer, Richard E - Multimedia Learning
- Merrill, M. David – Component Display Theory / Knowledge Objects / First Principles of Instruction
- Papert, Seymour – Constructionism, LOGO – 1970s
- Piaget, Jean – Cognitive development – 1960s
- Reigeluth, Charles – Elaboration Theory, "Green Books" I, II, and III – 1999–2010
- Schank, Roger – Constructivist simulations – 1990s
- Simonson, Michael – Instructional Systems and Design via Distance Education – 1980s
- Skinner, B.F. – Radical Behaviorism, Programed Instruction
- Sweller, John – Cognitive load, Worked-example effect, Split-attention effect
- Vygotsky, Lev – Learning as a social activity – 1930s
- ADDIE Model
- educational assessment
- confidence-based learning
- educational animation
- educational psychology
- educational technology
- e-learning framework
- electronic portfolio
- First Principles of Instruction
- human–computer interaction
- instructional technology
- instructional theory
- interaction design
- learning object
- learning science
- multimedia learning
- online education
- instructional design coordinator
- interdisciplinary teaching
- rapid prototyping
- lesson study
- Understanding by Design
- Merrill, M. D., Drake, L., Lacy, M. J., Pratt, J., & ID2_Research_Group. (1996). Reclaiming instructional design. Educational Technology, 36(5), 5-7. http://mdavidmerrill.com/Papers/Reclaiming.PDF
- Cognition and instruction: Their historic meeting within educational psychology. Mayer, Richard E. Journal of Educational Psychology, Vol 84(4), Dec 1992, 405-412. doi:10.1037/0022-06188.8.131.525 http://psycnet.apa.org/journals/edu/84/4/405/
- Duffy, T. M., & Cunningham, D. J. (1996). Constructivism: Implications for the design and delivery of instruction. In D. Jonassen (Ed.), Handbook of Research for Educational Communications and Technology (pp. 170-198). New York: Simon & Schuster Macmillan
- Duffy, T. M. , & Jonassen, D. H. (1992). Constructivism: New implications for instructional technology. In T. Duffy & D. Jonassen (Eds.), Constructivism and the technology of instruction (pp. 1-16). Hillsdale, NJ: Erlbaum.
- Reiser, R. A., & Dempsey, J. V. (2012). Trends and issues in instructional design and technology. Boston: Pearson.
- Clark, B. (2009). The history of instructional design and technology. Retrieved from http://www.slideshare.net/benton44/history-of-instructional-design-and-technology?from=embed
- Bloom's Taxonomy. Retrieved from Wikipedia on April 18, 2012 at Bloom's Taxonomy
- Instructional Design Theories. Instructionaldesign.org. Retrieved on 2011-10-07.
- Reiser, R. A. (2001). "A History of Instructional Design and Technology: Part II: A History of Instructional Design". ETR&D, Vol. 49, No. 2, 2001, pp. 57–67. Retrieved from https://files.nyu.edu/jpd247/public/2251/readings/Reiser_2001_History_of_ID.pdf
- History of instructional media. Uploaded to YouTube by crozitis on Jan 17, 2010. Retrieved from http://www.youtube.com/watch?v=y-fKcf4GuOU
- A hypertext history of instructional design. Retrieved April 11, 2012 from http://faculty.coe.uh.edu/smcneil/cuin6373/idhistory/index.html
- Markham, R. "History of instructional design". Retrieved on April 11, 2012 from http://home.utah.edu/~rgm15a60/Paper/html/index_files/Page1108.htm
- Paas, Fred; Renkl, Alexander; Sweller, John (2003). "Cognitive Load Theory and Instructional Design: Recent Developments". Educational Psychologist 38 (1). doi:10.1207/S15326985EP3801_1.
- History and timeline of instructional design. Retrieved April 11, 2012 from http://www.instructionaldesigncentral.com/htm/IDC_instructionaltechnologytimeline.htm
- Braine, B., (2010). "Historical Evolution of Instructional Design & Technology". Retrieved on April 11, 2012 from http://timerime.com/en/timeline/415929/Historical+Evolution+of+Instructional+Design++Technology/
- Trentin G. (2001). Designing Online Courses. In C.D. Maddux & D. LaMont Johnson (Eds) The Web in Higher Education: Assessing the Impact and Fulfilling the Potential, pp. 47-66, The Haworth Press Inc., New York, London, Oxford, ISBN 0-7890-1706-7. https://www.researchgate.net/publication/235938996_Designing_Online_Courses?ev=pub_srch_pub
- Sweller, J. (1988). "Cognitive load during problem solving: Effects on learning". Cognitive Science 12 (1): 257–285. doi:10.1016/0364-0213(88)90023-7.
- Chandler, P. & Sweller, J. (1991). "Cognitive Load Theory and the Format of Instruction". Cognition and Instruction 8 (4): 293–332. doi:10.1207/s1532690xci0804_2.
- Sweller, J., & Cooper, G.A. (1985). "The use of worked examples as a substitute for problem solving in learning algebra". Cognition and Instruction 2 (1): 59–89. doi:10.1207/s1532690xci0201_3.
- Cooper, G., & Sweller, J. (1987). "Effects of schema acquisition and rule automation on mathematical problem-solving transfer". Journal of Educational Psychology 79 (4): 347–362. doi:10.1037/0022-06184.108.40.2067.
- Mayer, R.E. (1997). "Multimedia Learning: Are We Asking the Right Questions?". Educational Psychologist 32 (41): 1–19. doi:10.1207/s15326985ep3201_1.
- Mayer, R.E. (2001). Multimedia Learning. Cambridge: Cambridge University Press. ISBN 0-521-78239-2.
- Mayer, R.E., Bove, W. Bryman, A. Mars, R. & Tapangco, L. (1996). "When Less Is More: Meaningful Learning From Visual and Verbal Summaries of Science Textbook Lessons". Journal of Educational Psychology 88 (1): 64–73. doi:10.1037/0022-06220.127.116.11.
- Mayer, R.E., Steinhoff, K., Bower, G. and Mars, R. (1995). "A generative theory of textbook design: Using annotated illustrations to foster meaningful learning of science text". Educational Technology Research and Development 43 (1): 31–41. doi:10.1007/BF02300480.
- Paas, F., Renkl, A. & Sweller, J. (2004). "Cognitive Load Theory: Instructional Implications of the Interaction between Information Structures and Cognitive Architecture". Instructional Science 32: 1–8. doi:10.1023/B:TRUC.0000021806.17516.d0.
- Clark, R.C., Mayer, R.E. (2002). e-Learning and the Science of Instruction: Proven Guidelines for Consumers and Designers of Multimedia Learning. San Francisco: Pfeiffer. ISBN 0-7879-6051-9.
- Clark, R.C., Nguyen, F., and Sweller, J. (2006). Efficiency in Learning: Evidence-Based Guidelines to Manage Cognitive Load. San Francisco: Pfeiffer. ISBN 0-7879-7728-4.
- Anglin, G. J., & Towers, R. L. (1992). Reference citations in selected instructional design and technology journals, 1985-1990. Educational Technology Research and DEevelopment, 40, 40-46.
- Perry, J. D. (2001). Learning and cognition. [On-Line]. Available: http://education.indiana.edu/~p540/webcourse/gagne.html
- Gagné, R. M. (1985). The conditions of learning (4th ed.). New York: Holt, Rinehart & Winston.
- Gagné, R. M., & Driscoll, M. P. (1988). Essentials of learning for instruction. Englewood Cliffs, NJ: Prentice-Hall.
- Haines, D. (1996). Gagné. [On-Line]. Available: http://education.indiana.edu/~educp540/haines1.html
- Dowling, L. J. (2001). Robert Gagné and the Conditions of Learning. Walden University.
- Dick, W., & Carey, L. (1996). The systematic design of instruction. 4th ed. New York, NY: Harper Collin
- Instructional Design Models and Theories, Retrieved April 9th 2012 from http://www.instructionaldesigncentral.com/htm/IDC_instructionaldesignmodels.htm#kemp
- Psychological Principles in System Development-1962. Retrieved on April 15, 2012 from http://www.nwlink.com/~donclark/history_isd/gagne.html
- Merrill, D.M., Jones, M.K., & Chongqing, L. (December 1990). Instructional Transaction Theory. Retrieved from http://www.speakeasydesigns.com/SDSU/student/SAGE/compsprep/ITT_Intro.pdf
- Elaboration Theory (Charles Reigeluth), Retrieved April 9, 2012 from http://www.instructionaldesign.org/theories/elaboration-theory.html
- Wiburg, K. M. (2003). [Web log message]. Retrieved from http://www.internettime.com/itimegroup/Is it Time to Exchange Skinner's Teaching Machine for Dewey's.htm
- Richey, R. C. (2000). The legacy of Robert M.Gagné . Syracuse, NY: ERIC Clearinghouse on Information & Technology.
- Gagné, R.M. (n.d.). Biographies. Retrieved April 18, 2012, from Answers.com Web site: http://www.answers.com/topic/robert-mills-gagn
- Conole G., and Fill K., "A learning design toolkit to create pedagogically effective learning activities". Journal of Interactive Media in Education, 2005 (08).
- Carr-Chellman A. and Duchastel P., "The ideal online course," British Journal of Educational Technology, 31(3), 229–241, July 2000.
- Koper R., "Current Research in Learning Design," Educational Technology & Society, 9 (1), 13–22, 2006.
- Britain S., "A Review of Learning Design: Concept, Specifications and Tools" A report for the JISC E-learning Pedagogy Programme, May 2004.
- IMS Learning Design webpage. Imsglobal.org. Retrieved on 2011-10-07.
- Branson, R. K., Rayner, G. T., Cox, J. L., Furman, J. P., King, F. J., Hannum, W. H. (1975). Interservice procedures for instructional systems development. (5 vols.) (TRADOC Pam 350-30 NAVEDTRA 106A). Ft. Monroe, VA: U.S. Army Training and Doctrine Command, August 1975. (NTIS No. ADA 019 486 through ADA 019 490).
- Piskurich, G.M. (2006). Rapid Instructional Design: Learning ID fast and right.
- Saettler, P. (1990). The evolution of American educational technology.
- Stolovitch, H.D., & Keeps, E. (1999). Handbook of human performance technology.
- Kelley, T., & Littman, J. (2005). The ten faces of innovation: IDEO's strategies for beating the devil's advocate & driving creativity throughout your organization. New York: Doubleday.
- Hokanson, B., & Miller, C. (2009). Role-based design: A contemporary framework for innovation and creativity in instructional design. Educational Technology, 49(2), 21–28.
- Dick, Walter, Lou Carey, and James O. Carey (2005) . The Systematic Design of Instruction (6th ed.). Allyn & Bacon. pp. 1–12. ISBN 0-205-41274-2.
- Esseff, Peter J. and Esseff, Mary Sullivan (1998) . Instructional Development Learning System (IDLS) (8th ed.). ESF Press. pp. 1–12. ISBN 1-58283-037-1.
- ESF, Inc. – Train-the-Trainer – ESF ProTrainer Materials – 813.814.1192. Esf-protrainer.com (2007-11-06). Retrieved on 2011-10-07.
- Smith, P. L. & Ragan, T. J. (2004). Instructional design (3rd Ed.). Danvers, MA: John Wiley & Sons.
- Morrison, G. R., Ross, S. M., & Kemp, J. E. (2001). Designing effective instruction, 3rd ed. New York: John Wiley.
- Joeckel, G., Jeon, T., Gardner, J. (2010). Instructional Challenges In Higher Education: Online Courses Delivered Through A Learning Management System By Subject Matter Experts. In Song, H. (Ed.) Distance Learning Technology, Current Instruction, and the Future of Education: Applications of Today, Practices of Tomorrow. (link to article)
- R. Ryan; E. Deci. "Intrinsic and Extrinsic Motivations". Contemporary Educational Psychology. Retrieved April 1, 2012.
- Brad Bell. "Intrinsic Motivation and Extrinsic Motivation with Examples of Each Types of Motivation". Blue Fox Communications. Retrieved April 1, 2012.
- Keller, John. "arcsmodel.com". John M. Keller. Retrieved April 1, 2012.
- Ely, Donald (1983). Development and Use of the ARCS Model of Motivational Design. Libraries Unlimited. pp. 225–245.
- Hardré, Patricia; Miller, Raymond B. (2006). "Toward a current, comprehensive, integrative, and flexible model of motivation for instructional design". Performance Improvement Quarterly 19 (3).
- Hardré, Patricia (2009). "The motivating opportunities model for Performance SUCCESS: Design, Development, and Instructional Implications". Performance Improvement Quarterly 22 (1). doi:10.1002/piq.20043.
|Wikiversity has learning materials about Instructional design|
- Instructional Design – An overview of Instructional Design
- ISD Handbook
- Edutech wiki: Instructional design model 
- Debby Kalk, Real World Instructional Design Interview