ISO/IEC JTC 1
|Purpose||Development of worldwide information and communications technology (ICT) standards for business and consumer applications|
|Parent organization||International Organization for Standardization (ISO) and International Electrotechnical Commission (IEC)|
ISO/IEC JTC 1 is a joint technical committee of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC). Its purpose is to develop, maintain and promote standards in the fields of information technology (IT) and Information and Communications Technology (ICT).
JTC 1 has been responsible for many critical IT standards. The Moving Picture Experts Group was formed under JTC 1.
ISO/IEC JTC 1 was formed in 1987 as a merger between ISO/TC 97 (Information Technology) and IEC/TC 83, with IEC/SC 47B joining later. The intent was to bring together, in a single committee, the IT standardization activities of the two parent organizations in order to avoid duplicative or possibly incompatible standards. At the time of its formation, the mandate of JTC 1 was to develop base standards in information technology upon which other technical committees could build. This would allow for the development of domain and application specific standards that could be applicable to specific business domains, while also ensuring the interoperation and function of the standards on a consistent base.
In its first 15 years, JTC 1 brought about many standards in the information technology sector, including standards in the fields of multimedia (such as MPEG), IC cards (or “smart cards”), ICT security, programming languages, and character sets (such as the Universal Character Set). In the early 2000s, the organization expanded its standards development into fields such as security and authentication, bandwidth/connection management, storage and data management, software and systems engineering, service protocols, portable computing devices, and certain societal aspects such as data protection and cultural and linguistic adaptability.
For more than 25 years, JTC 1 has provided a standards development environment where experts come together to develop worldwide Information and Communication Technology (ICT) standards for business and consumer applications. JTC 1 is also addressing such critical areas as teleconferences and e-meetings, cloud data management interface, biometrics in identity management, sensor networks for smart grid systems, and corporate governance of ICT implementation. As technologies converge, JTC 1 acts as a system integrator, especially in areas of standardization in which many consortia and forums are active. JTC 1 provides the standards approval environment for integrating diverse and complex ICT technologies. These standards rely upon the core infrastructure technologies developed by JTC 1 centers of expertise complemented by specifications developed in other organizations. There are over 2600 published JTC 1 standards developed by some 2100 technical experts from around the world, many of which are freely available for download.
JTC 1 has a publicly available specification (PAS) process. The PAS process allows a PAS to be approved as an ISO/IEC standard within 9 months. Consortia, such as OASIS, Trusted Computing Group (TCG), The Open Group, Object Management Group (OMG), W3C, UPnP Forum, Distributed Management Task Force (DMTF), Storage Networking Industry Association (SNIA) and Open Geospatial Consortium (OGC) use this process to quickly transpose their specifications into ISO/IEC standards.
Scope and mission
The scope of ISO/IEC JTC 1 is “International standardization in the field of Information Technology.” Its official mandate is to develop, maintain, promote and facilitate IT standards required by global markets meeting business and user requirements concerning:
- The design and development of IT systems and tools
- The performance and quality of IT products and systems
- The security of IT systems and information
- The portability of application programs
- The interoperability of IT products and systems
- The unified tools and environments
- The harmonized IT vocabulary
- The user-friendly and ergonomically-designed user interfaces
JTC 1 has a number of principles that guide standards development within the organization, which include:
- Standards development conducted with full attention to a strong business-like approach (e.g., cost effective, short development times, market-oriented results)
- Providing a wide range of quality products and services, within the JTC 1 scope and mission, to cover identified global needs
- Promoting the use of its products and services and the timely implementation of JTC 1 standards within the form of useful products on a worldwide basis
- Ensuring that its user needs, including multicultural requirements, are fully met, such that its products and services promote international trade
- Recognizing the value of the work of other organizations and the contribution they make to international IT standardization and complementing existing and forthcoming JTC 1 programs through other leading edge activity with the objective of providing the best standards worldwide
- Providing a standards development environment which attracts technical experts and users having identified standardization needs
Membership in JTC 1 is open to any national body, as is the case for membership in either of the two parent organizations. A member can be either participating (P) or observing (O), with the difference mainly being the ability to vote on proposed standards. There are a number of countries that are active participants of JTC 1, as well as a number of observing countries. The secretariat of JTC 1 is the American National Standards Institute (ANSI), located in the United States.
Other organizations can participate as Liaison Members, some of which are internal to ISO/IEC and some of which are external. The external organizations that are in liaison with JTC 1 are:
Most work on the development of standards is done by subcommittees (SCs), each of which deals with a particular field. Most of these subcommittees have several working groups (WGs). Subcommittees, working groups, special working groups (SWGs), and study groups (SGs) within JTC 1 are:
|Subcommittee/Working Group/Special Working Group||Title|
|ISO/IEC JTC 1/SG 1||Smart Cities|
|ISO/IEC JTC 1/SG 2||Big Data|
|ISO/IEC JTC 1/SWG 1||Accessibility (SWG-A)|
|ISO/IEC JTC 1/SWG 2||Directives|
|ISO/IEC JTC 1/SWG 3||Planning|
|ISO/IEC JTC 1/SWG 5||Internet of Things (IoT)|
|ISO/IEC JTC 1/SWG 6||Management|
|ISO/IEC JTC 1/WG 7||Sensor networks|
|ISO/IEC JTC 1/SC 2||Coded character sets|
|ISO/IEC JTC 1/SC 6||Telecommunications and information exchange between systems|
|ISO/IEC JTC 1/SC 7||Software and systems engineering|
|ISO/IEC JTC 1/SC 17||Cards and personal identification|
|ISO/IEC JTC 1/SC 22||Programming languages, their environments and system software interfaces|
|ISO/IEC JTC 1/SC 23||Digitally Recorded Media for Information Interchange and Storage|
|ISO/IEC JTC 1/SC 24||Computer graphics, image processing and environmental data representation|
|ISO/IEC JTC 1/SC 25||Interconnection of information technology equipment|
|ISO/IEC JTC 1/SC 27||IT security techniques|
|ISO/IEC JTC 1/SC 28||Office equipment|
|ISO/IEC JTC 1/SC 29||Coding of audio, picture, multimedia and hypermedia information|
|ISO/IEC JTC 1/SC 31||Automatic identification and data capture techniques|
|ISO/IEC JTC 1/SC 32||Data management and interchange|
|ISO/IEC JTC 1/SC 34||Document description and processing languages|
|ISO/IEC JTC 1/SC 35||User interfaces|
|ISO/IEC JTC 1/SC 36||Information technology for learning, education and training|
|ISO/IEC JTC 1/SC 37||Biometrics|
|ISO/IEC JTC 1/SC 38||Distributed application platforms & services (DAPS)|
|ISO/IEC JTC 1/SC 39||Sustainability for and by Information Technology|
|ISO/IEC JTC 1/SC 40||IT Service Management and IT Governance|
Each subcommittee can have subgroups created for specific purposes:
- Study Groups (SGs) are chartered to investigate the need and feasibility of additional standardization and/or guidance in a technical area. The main objective of a Study Group is to understand the current activities in a particular area and make recommendations to JTC 1 or a specific subcommittee.
- Working Groups (WGs) are established to expedite development of one or more approved work items, and will exist as long as it has responsibility for approved work items.
- Other Working Groups (OWGs) undertake specific tasks between the meetings of a subcommittee. These tasks are defined in the terms of reference of the OWG.
Subcommittees can be created to deal with new situations (SC 37 was established in 2002; SC 38 in 2009 and SC 39 in 2012) or disbanded if the area of work is no longer relevant. There is no requirement for any member body to maintain status on any or all of the subcommittees.
- International Organization for Standardization
- International Electrotechnical Commission
- American National Standards Institute
- List of IEC Technical Committees
- List of ISO standards
- ISO/IEC JTC 1/SC 17/WG 1
- ISO/IEC (2012), ISO/IEC JTC 1 Standing Document N 2, ISO/IEC
- "MPEG: Standards". Retrieved 2013-06-21.
- Rajchel, Lisa (2012-06-18). "25 years of ISO/IEC JTC 1 - We've come a long way!". Retrieved 2013-06-20.
- Podio, Fernando L. (2012-09-05). "Published International Biometric Standards Developed by ISO/IEC JTC 1/SC 37 – Biometrics".
- ISO/IEC JTC 1. "Freely Available Standards". Retrieved 2013-06-21.
- Dardailler, Daniel (2012-10-15). "W3C PAS FAQ". Retrieved 2013-06-21.
- ISO. "JTC 1 Mission and Principles". Retrieved 2013-06-20.
- ISO. "ISO/IEC JTC 1 – Information Technology: Participating Countries". Retrieved 2013-06-20.
- ISO. "JTC 1 - Information technology". ISO. Retrieved 2009-11-11.
- ISO/IEC JTC 1 (2013-11-13). "Resolutions Adopted at the 28th Meeting of ISO/IEC JTC 1, 4-9 November 2013 in Perros-Guirec, France". Retrieved 2013-12-19.