The Liner lock is a locking mechanism for opening and closing folding pocket knives. The modern liner lock traces its lineage to the late 19th century, but the design saw significant improvement in construction and execution in the 1980s by custom knifemaker Michael Walker.
Liner lock knives have been around since the late 19th century. The Cattaraugus liner locking patent, 825,093 was issued on July 3, 1906. After 1923 when the patent expired, it was used by other manufacturers such as in the common military and lineman's issue two-blade electrician’s knife; the Camillus TL-29 for the locking screwdriver-stripper blade, until 2007 when the Camillus Cutlery Company went out of business.
Walker refined and popularized the design, eventually securing a trademark  for the name "Linerlock." Walker's main contribution to improve the design was to facilitate true one handed opening of the knife. This was accomplished by removing the weak back spring and adding a heat-treated stop pin to align the blade in the open position. Walker added a detent ball to hold the blade in the closed position using the same spring force from the liner.
Liner lock mechanisms are most commonly composed of titanium alloy or steel. The liner lock's locking side liner is split from the top toward the bottom, similar to an automotive leaf spring (also called a lock bar) that butts up against the tang of the blade to prevent the blade from closing. In an interview with Blade in 1988, Walker stated, “This long leaf-spring effect cuts down on stress on the locking mechanism". As the lock on the original electrician's knife was mostly to hold a screwdriver blade open (the knife blade, itself was secured by a slip joint methos), Walker's refinements prevented the knife blade from closing on the user's hand and converted it into a true lock.
To release the lock, the user presses the lock bar back toward the handle side, at which time the blade is free to close. In the closed position the lock bar (leaf spring) rests alongside the handle and the blade.
There are a number of other variations on the liner lock or locking liner, depending on the knife manufacturer. One example would be the frame lock, sometimes called the Reeve Integral Lock and used on the Sebenza. With the "frame lock," the frame rather than the liner acts like the leaf spring/lock bar. Another variation, known as the inset liner lock has the leaf spring embedded into the plastic scales of the handle, technically forgoing a metal liner. Kershaw Knives uses "a pin-and-dimple lock" on a knife designed by custom knifemaker RJ Martin called the "Nerve" to keep the blade closed.
- Buck Knives
- Cold Steel
- Ernest Emerson
- Gerber Knives
- Mike Snody
- Ken Onion
- Microtech Knives
- Robert Terzuola
- Strider Knives
- Warner, Ken (1991). Knives 91. p. 31.
- Darom, David (2003). Art and Design in Modern: Custom Folding Knives. Saviolo Publisher. p. 48. ISBN 978-965-07-1174-0. Retrieved 7 April 2013.
- Howell, Larry L.; Magleby, Spencer P. (2013). Handbook of Compliant Mechanisms. New York: John Wiley & Sons. p. 278. ISBN 978-1119953456.
- SN 73813333
- Haskew, Mike (2004). "Handmades that Stand the Test of Time". Blade 30 (1).
- Delavigne, Kenneth T. Spyderco Story: The New Shape of Sharp. pp. 118–125. ISBN 1-58160-060-7.
- Walker, Greg (1993). Battle Blades: A Professional's Guide to Combat/Fighting Knives. Boulder, Colorado: Paladin Press. pp. 37–38. ISBN 0-87364-732-7.
- Terzuola, Robert (2000). The Tactical Folding Knife: A Study of the Anatomy and Construction of the Liner-Locked Folder. Krause Publications. pp. 47–50. ISBN 0-87341-858-1.
- Shackleford, Steve (2010). Blade's Guide to Knives & Their Values. Iola, Wisconsin: Krause Publications. pp. 452–453. ISBN 978-1-4402-1460-8.
- Ayres, James M. (17 March 2010). The Tactical Knife: Designs, Techniques & Uses. Iola, Wisconsin: Krause Publications. p. 68. ISBN 978-1-4402-0900-0.
- "Nerve". KAI. 2010. Retrieved 2013-04-05.