Area code 202
202 is the North American telephone area code for Washington, D.C. It was one of the area codes originally assigned in October 1947. The capital was assigned 202 because the North American Numbering Plan Administration wanted to keep the number of "clicks" to a minimum for densely populated areas, given the rotary dialing technology in use at the time. Though area codes as short as 5 clicks were possible for area codes covering just a city or portion of a state, area codes covering an entire state always had 0 as the middle digit. The District was treated the same as a state by NANPA, and was thus assigned an area code with 14 clicks, tied with Maryland's 301 as the second-fastest single-state area code that could be dialed under NANPA's original guidelines (0 and 1 were not allowed as the first digit, the second digit was either 0 or 1, and the third digit could not be the same as the second digit). The only faster one was New Jersey's 201.
As of 2012, there are no plans to overlay the 202 area code, as NANPA estimates the current supply of 202 numbers is sufficient at least to the year 2017. Washington is thus one of the largest cities where seven-digit dialing is still possible. However, the call will be connected if the area code is dialed. There is, of course, no provision for long-distance calls within the area code.
From 1947 to 1990, area code 202 was an unpublished alternate area code for the nearby suburbs in Maryland and Virginia, which were officially in area codes 301 and 703, respectively. This was possible because the entire Washington metropolitan area is a single LATA. Every number on the Maryland and Virginia sides of the Washington metropolitan area was given a "secret" number in 202. This arrangement allowed local calls throughout the metropolitan area to be dialed using only seven digits. For example, a telephone number in Kensington, Maryland, that was officially 301-949-xxxx could be dialed as 202-949-xxxx as well. However, on October 1, 1990, due to pending number exhaustion, the ability to dial the suburbs using area code 202 ended (to start allowing previously-impossible prefix duplications). Currently, local calls between area codes require 10-digit dialing (area code + number, leading "1" is not required and is usually not allowed). Due to continued growth in the region, there later came the 703/540 split in Virginia, the overlaying of 703 with 571 in Virginia, and the 301/410 split in Maryland.
Phone numbers for offices in Congress begin with 202-224, 202-225, or 202-226.
- NANPA Area Code Map of District of Columbia
- List of exchanges from AreaCodeDownload.com, 202 Area Code
|District of Columbia area codes: 202|
|West: 571/703||area code 202||East: 240/301|
|Maryland area codes: 240, 301, 410, 443|
|Virginia area codes: 276, 434, 540, 571, 703, 757, 804|