Early flying machines
Early flying machines include all forms of aircraft studied or constructed before the development of the modern aeroplane by 1910. The story of modern flight begins more than a century before the first successful manned aeroplane, and the earliest aircraft thousands of years before that.
- 1 Primitive beginnings
- 2 Lighter than air
- 3 Heavier than air - Parachutes and kites
- 4 Heavier than air - sustained flight
- 4.1 Conceiving mechanical flight
- 4.2 The 18th Century
- 4.3 Powered, controlled flight
- 4.4 Practical aircraft
- 4.5 Military use
- 4.6 Helicopters
- 5 References
- 6 See also
- 7 External links
The origin of mankind's desire to fly is lost in the distant past. From the earliest legends there have been stories of men strapping birdlike wings, stiffened cloaks or other devices to themselves and attempting to fly, typically by jumping off a tower. During this early period the issues of lift, stability and control were not understood, and most attempts ended in serious injury or death. Designs often lacked an effective horizontal tail, or the wings were simply too small.
The Greek legend of Daedalus and Icarus is one of the earliest to come down to us. According to Ovid, Daedalus tied feathers together, from smallest to largest so as to form an increasing surface. He secured the feathers at their midpoints with string and at their bases with wax, and gave the whole a gentle curvature like the wings of a bird. Other ancient legends include the Indian Vimanas and the British King Bladud. In the 1st century AD, when Wang Mang tried to recruit a specialist scout, a man binding himself with bird feathers is claimed to have glided about 100 meters.
In medieval Europe, the earliest recorded tower jump dates from 852 AD, when Armen Firman made a jump in Cordoba, Spain, reportedly covering his body with vulture feathers and attaching two wings to his arms. On landing he is said to have crashed and sustained a back injury which some critics attributed to a lack of a tail. In 1010 AD Eilmer of Malmesbury, an English monk, flew from the tower of Malmesbury Abbey in a primitive glider. Eilmer was said to have flown over 200 yards (180 m) before landing, breaking both his legs. Eilmer later remarked that the only reason he did not fly further was that he forgot to give his machine a tail. This burst of activity was followed by a lull of several centuries.
Jumping revived in 1496 with Seccio breaking both arms in Nuremberg and continued unabated at least until the early 19th century, with never more than partial success. Francis Willughby's suggestion, published in 1676, that human legs were more comparable to birds' wings in strength than arms, had only occasional influence. As late as 1811, Albrecht Berblinger constructed an ornithopter and jumped into the Danube at Ulm.
The kite was invented in China, possibly as far back as the 5th century BC by Mozi (also Mo Di) and Lu Ban (also Gongshu Ban). These kites were used as leaf kites and were constructed by stretching silk over a split bamboo framework. The earliest known Chinese kites were flat (not bowed) and often rectangular. Later, tailless kites incorporated a stabilizing bowline. Designs often emulated flying insects, birds, and other beasts, both real and mythical. Some were fitted with strings and whistles to make musical sounds while flying.
By at least 549 AD paper kites were being flown, as it was recorded in that year a paper kite was used as a message for a rescue mission. Ancient and medieval Chinese sources list other uses of kites for measuring distances, testing the wind, lifting men, signaling, and communication for military operations.
After its introduction into India, the kite further evolved into the fighter kite. Traditionally these are small, unstable single line flat kites where line tension alone is used for control, and an abrasive line is used to cut down other kites.
By 1634 kites had reached the West, with an illustration of a diamond kite with a tail appearing in Bate's Mysteries of nature and art.
The use of a rotor for vertical flight has existed since 400 BC in the form of the bamboo-copter, an ancient Chinese toy. The bamboo-copter is spun by rolling a stick attached to a rotor. The spinning creates lift, and the toy flies when released. The philosopher Ge Hong's book the Baopuzi (Master Who Embraces Simplicity), written around 317, describes the apocryphal use of a possible rotor in aircraft: "Some have made flying cars [feiche 飛車] with wood from the inner part of the jujube tree, using ox-leather (straps) fastened to returning blades so as to set the machine in motion."
The similar "moulinet à noix" (rotor on a nut) did not appear in Europe until the 14th century AD.
Hot air balloons
From ancient times the Chinese have understood that hot air rises and have applied the principle to a type of small hot air balloon called a sky lantern. A sky lantern consists of a paper balloon under or just inside which a small lamp is placed. Sky lanterns are traditionally launched for pleasure and during festivals. According to Joseph Needham, such lanterns were known in China from the 3rd century BC. Their military use is attributed to the general Zhuge Liang (180–234 AD, honorific title Kongming), who is said to have used them to scare the enemy troops:
- An oil lamp was installed under a large paper bag, and the bag floated in the air due to the lamp heating the air. ... The enemy was frightened by the light in the air, thinking that some divine force was helping him.
There is evidence that the Chinese also "solved the problem of aerial navigation" using balloons, hundreds of years before the 18th century.
Eventually some investigators began to discover and define some of the basics of scientific aircraft design. Powered designs were either still driven by man-power or used a metal spring.
- Roger Bacon
The Englishman Roger Bacon predicted future designs for a balloon filled with an unspecified aether and a man-powered ornithopter in his book De mirabili potestate carto et naturae (Secrets of Art and Nature), 1250.
- Leonardo da Vinci
Leonardo da Vinci studied bird flight for many years, analyzing it rationally and anticipating many principles of aerodynamics. He understood that "An object offers as much resistance to the air as the air does to the object." Newton would not publish the Third law of motion until 1687.
From the last years of the 15th century on he wrote about and sketched many designs for flying machines and mechanisms, including ornithopters, fixed-wing gliders, rotorcraft and parachutes. His early designs were man-powered types including ornithopters and rotorcraft, however he came to realise the impracticality of this and later turned to controlled gliding flight, also sketching some designs powered by a spring.
In 1488 he drew a hang glider design in which the inner parts of the wings are fixed, and some control surfaces are provided towards the tips (as in the gliding flight in birds). While his drawings exist and are deemed flightworthy in principle, he himself never flew in it. A model he built for a test flight in 1496 did not fly, and some other designs, such as the four-person screw-type helicopter, have severe flaws. He drew and wrote about a design for an ornithopter in c. 1490.
Da Vinci's work remained unknown until 1797, and so had no influence on developments over the next three hundred years. Nor were his designs based on particularly good science.
Lighter than air
The modern era of lighter-than-air flight began early in the 17th century with Galileo's experiments in which he showed that air has weight. Around 1650 Cyrano de Bergerac wrote some fantasy novels in which he described the principle of ascent using a substance (dew) he supposed to be lighter than air, and descending by releasing a controlled amount of the substance. Francesco Lana de Terzi measured the pressure of air at sea level and in 1670 proposed the first scientifically credible lifting medium in the form of hollow metal spheres from which all the air had been pumped out. These would be lighter than the displaced air and able to lift an airship. His proposed methods of controlling height are still in use today; by carrying ballast which may be dropped overboard to gain height, and by venting the lifting containers to lose height. In practice de Terzi's spheres would have collapsed under air pressure, and further developments had to wait for more practicable lifting gases.
The first documented balloon flight in Europe was of a model made by the Brazilian priest Bartolomeu de Gusmão. On August 8, 1709, in Lisbon, he made a small hot-air balloon of paper with a fire burning beneath it, lifting it about four meters in front of king John V and the Portuguese court.
From the mid-18th century the Montgolfier brothers in France began experimenting with parachutes and balloons. Their balloons were made of paper, and early experiments using steam as the lifting gas were short-lived due to its effect on the paper as it condensed. Mistaking smoke for a kind of steam, they began filling their balloons with hot smoky air which they called "electric smoke" and, despite not fully understanding the principles at work, made some successful launches and in December 1782 flew a 20 cu.m. balloon to 300 m. The French Academie des Sciences soon invited them to Paris to give a demonstration.
Meanwhile the discovery of hydrogen led Joseph Black in c. 1780 to propose its use as a lifting gas, though practical demonstration awaited a gastight balloon material. On hearing of the Montgolfier Brothers' invitation, an Academy member Jacques Charles offered a similar demonstration of a hydrogen balloon and this was accepted. Charles and two craftsmen, the Robert brothers, developed a gastight material of rubberised silk and set to work.
1783 was a watershed year for ballooning. Between June 4 and December 1 five separate French balloons scored notable aviation firsts:
- The Montgolfier brothers unmanned hot air balloon lifted a sheep, a duck and a chicken in a basket hanging beneath, flying from Annonay, France on 4 June.
- Professor Jacques Charles and the Robert brothers, (Anne-Jean and Nicolas-Louis), unmanned hydrogen balloon, Le Globe, flew on 27 August. The hydrogen gas was generated by chemical reaction during the filling process.
- The Montgolfiers launched the first manned flight, a tethered balloon with humans on board, at the Folie Titon in Paris on 19 October. The aviators were the scientist Jean-François Pilâtre de Rozier, the manufacture manager Jean-Baptiste Réveillon, and Giroud de Villette.
- The Montgolfiers launched the first free flight balloon with human passengers on 21 November. King Louis XVI had originally decreed that condemned criminals would be the first pilots, but Jean-François Pilâtre de Rozier, along with the Marquis François d'Arlandes, successfully petitioned for the honor. They drifted 8 km (5.0 mi) in a balloon powered by a wood fire. 9 kilometres (5.6 mi) covered in 25 minutes,
- Jacques Charles and the Nicolas-Louis Robert launched a manned hydrogen balloon from the Jardin des Tuileries in Paris, on 1 December. They ascended to a height of about 1,800 ft (550 m) and landed at sunset in Nesles-la-Vallée after a flight of 2 hours and 5 minutes, covering 22 mi (36 km). After Robert alighted Charles decided to ascend alone. This time he ascended rapidly to an altitude of about 3,000 metres, where he saw the sun again, suffered extreme pain in his ears, and never flew again.
The Montgolfier designs had several shortcomings, not least the need for dry weather and a tendency for sparks from the fire to set light to the paper balloon. The manned design had a gallery around the base of the balloon rather than the hanging basket of the first, unmanned design, which brought the paper closer to the fire. On their free flight, De Rozier and d'Arlandes took buckets of water and sponges to douse these fires as they arose. On the other hand, the manned design of Charles was essentially modern. As a result of these exploits, the hot-air ballon became known as the Montgolfière type and the hydrogen balloon the Charlière.
Charles and the Robert brothers' next balloon, La Caroline, was a Charlière that followed Jean Baptiste Meusnier's proposals for an elongated dirigible balloon, and was notable for having an outer envelope with the gas contained in a second, inner ballonet. On 19 September 1784, it completed the first flight of over 100 km, between Paris and Beuvry, despite the man-powered propulsive devices proving useless.
In January the next year, Jean Pierre Blanchard and Dr. John Jeffries crossed the English Channel in a Charlière from Dover to the Bois de Felmores. But a similar attempt the other way would end in tragedy. In an attempt to provide both endurance and controllability, de Rozier developed a balloon having both hot air and hydrogen gas bags, a design which was soon named after him as the Rozière. His idea was to use the hydrogen section for constant lift and to navigate vertically by heating and allowing to cool the hot air section, in order to catch the most favourable wind at whatever altitude it was blowing. The balloon envelope was made of goldbeaters skin. Shortly after the flight began, de Rozier was seen to be venting hydrogen when it was ignited by a spark and the balloon went up in flames, killing those on board. The source of the spark is not known, but suggestions include static electricity or the brazier for the hot air section.
Ballooning quickly became a major "rage" in Europe in the late 18th century, providing the first detailed understanding of the relationship between altitude and the atmosphere.
Tethered balloons were employed during the American Civil War by the Union Army Balloon Corps. The young Ferdinand von Zeppelin first flew as a balloon passenger with the Union Army of the Potomac in 1863.
Dirigibles or airships
Work on developing a steerable (or dirigible) balloon (now called an airship) continued sporadically throughout the 19th century.
One of the first proposals for a commercial airline was made in 1849 by the American Rufus Porter. He proposed a New York to California Aerial Transport service based on a steam-powered dirigible, which was never competed.
The first powered, controlled, sustained lighter-than-air flight is believed to have taken place on 24 September 1852 when Henri Giffard flew 15 miles (24 km) in France with the Giffard dirigible, a Non-rigid airship filled with hydrogen and powered by a 3 hp steam engine driving a 3 bladed propeller, travelling 27 km (17 mi) from Paris to Trappes. This was the world's first passenger-carrying airship.
A genuine advance was made in 1884, when the first fully controllable free-flight was made in a French Army electric-powered airship, La France, by Charles Renard and Arthur Constantin Krebs. The 170-foot (52 m) long, 66,000-cubic-foot (1,900 m3) airship covered 8 km (5.0 mi) in 23 minutes with the aid of an 8½ horsepower electric motor. *Charles Renard, France 1884.irst closed course circuit, length 7.6 kilometres (4.7 mi) near Chalais-Meudon, August 9, 1884.
However, these aircraft were generally short-lived and extremely frail. Routine, controlled flights would not occur until the advent of the internal combustion engine (see below.)
Count Ferdinand von Zeppelin founded the Zeppelin firm, whose Luftschiff Zeppelin 1 (LZ 1) first flew from the Bodensee on the Swiss border on July 2, 1900, to become the world's first successful rigid airship. The flight lasted 18 minutes. The second and third flights were in October 1900 and October 24, 1900 respectively, beating the 6 m/s velocity record of the French airship La France by 3 m/s.
The Brazilian Alberto Santos-Dumont became famous by designing, building, and flying dirigibles. He designed, built, and flew the first fully practical dirigible, demonstrating that routine, controlled flight was possible. With his dirigible No.6 he won the Deutsch de la Meurthe prize on 19 October 1901 with a flight that took off from Saint-Cloud, rounded the Eiffel Tower and returned to the starting point.
By now, the airship was firmly established as the first practicable form of air travel.
Heavier than air - Parachutes and kites
Da Vinci's design for a pyramid-shaped parachute remained unpublished for centuries. The first published design was the Italian Fausto Veranzio's homo volans (flying man) which appeared in his book Machinae novae (New machines) in 1595. Based on a ship's sail, it comprised a square of material stretched across a square frame and retained by ropes. The parachutist was suspended by ropes from each of the four corners.
- Louis-Sébastien Lenormand, France — 1783
- Considered the first human to make a witnessed descent with a parachute. On December 26, 1783 he jumped from the tower of the Montpellier observatory in front of a crowd that included Joseph Montgolfier, using a 14 foot parachute with a rigid wooden frame.
Between 1853 and 1854, Louis Charles Letur developed a parachute-glider comprising an umbrella-like parachute with smaller, triangular wings and vertical tail beneath. This achieved what may have been the first controlled, heavier-than-air flight. Letur died when it crashed in 1854.
- Thomas Moy, British, 1879
- J. B. Biot, French, 1880
- The Biot Kite tailless kite
- Edson Fessenden Gallaudet, American, 1898
- Gallaudet Wing-Warping Kite was an example of a fixed-wing design flown as a kite for research purposes.
The modern man-carrying kite was invented in 1894 by Captain Baden-Powell, brother of Lord Baden-Powell, by stringing a chain of monoplane kites on a single line.
A significant development came in 1893 when Lawrence Hargrave invented the box kite. Samuel Franklin Cody would go on to sail across the English Channel in a boat towed by a box kite in 1903. In 1905, Sapper Moreton of the British Army's balloon section is lifted 2,600 ft (792 m) by a kite at Aldershot under the supervision of the kite's designer, Samuel Cody. Later the same year, Neil MacDermid was carried aloft in Canada by a large box kite named The Siamese Twins, designed by Alexander Graham Bell. In 1906 Cody sold a man-carrying design to the British Army.
Heavier than air - sustained flight
Conceiving mechanical flight
Leonardo da Vinci's realisation that man-power alone was not sufficient for sustained flight was rediscovered independently in the 17th century by Giovanni Alfonso Borelli and Robert Hooke. Hooke realised that some form of engine would be necessary and in 1655 made a spring-powered ornithopter model which was apparently able to fly.
Attempts to design or construct a true flying machine began, typically comprising a gondola with a supporting canopy and spring- or man-powered flappers for propulsion. Among the first were Hautsch and Burattini (1648). Others included de Gusmao's "Passarola" (1709 on), Swedenborg (1716), Desforges (1772), Bauer (1764), Meerwein (1781) and Blanchard (1781) who would later have more success with balloons. Rotary-winged helicopters likewise appeared, notably from Lomonosov (1754) and Paucton. A few model gliders flew successfully although some claims are contested, but in any event no full-size craft succeeded.
Italian inventor, Tito Livio Burattini, invited by the Polish King Władysław IV to his court in Warsaw, built a model aircraft with four fixed glider wings in 1647. Described as "four pairs of wings attached to an elaborate 'dragon'", it was said to have successfully lifted a cat in 1648 but not Burattini himself. He promised that "only the most minor injuries" would result from landing the craft. His "Dragon Volant" is considered "the most elaborate and sophisticated aeroplane to be built before the 19th Century".
Bartolomeu de Gusmão's "Passarola" was a hollow, vaguely bird-shaped glider of similar concept but with two wings. In 1709 he presented a petition to King John V of Portugal, begging for support for his invention of an "airship", in which he expressed the greatest confidence. The public test of the machine, which was set for June 24, 1709, did not take place. According to contemporary reports, however, Gusmão appears to have made several less ambitious experiments with this machine, descending from eminences. It is certain that Gusmão was working on this principle at the public exhibition he gave before the Court on August 8, 1709, in the hall of the Casa da Índia in Lisbon, when he propelled a ball to the roof by combustion.[clarification needed] He also demonstrated a small airship model before the Portuguese court, but never succeeded with a full-scale model.
However, both understanding and a power source were still lacking. This was recognised by Emanuel Swedenborg in his "Sketch of a Machine for Flying in the Air" published in 1716. His flying machine consisted of a light frame covered with strong canvas and provided with two large oars or wings moving on a horizontal axis, arranged so that the upstroke met with no resistance while the downstroke provided lifting power. Swedenborg knew that the machine would not fly, but suggested it as a start and was confident that the problem would be solved. He wrote: "It seems easier to talk of such a machine than to put it into actuality, for it requires greater force and less weight than exists in a human body. The science of mechanics might perhaps suggest a means, namely, a strong spiral spring. If these advantages and requisites are observed, perhaps in time to come some one might know how better to utilize our sketch and cause some addition to be made so as to accomplish that which we can only suggest." The Editor of the Royal Aeronautical Society journal wrote in 1910 that Swedenborg's design was "…the first rational proposal for a flying machine of the aeroplance [heavier-than-air] type…"
Meanwhile rotorcraft were not wholly forgotten. In July 1754, Mikhail Lomonosov demonstrated a small coaxial twin-rotor system, powered by a spring, to the Russian Academy of Sciences. The rotors were arranged one above the other and spun in opposite directions, principles still used in modern twin-rotor designs. In his 1768 Théorie de la vis d'Archimède, Alexis-Jean-Pierre Paucton suggested the use of one airscrew for lift and a second for propulsion, nowadays called a gyrodyne. In 1784 Launoy and Bienvenu demonstrated a flying model with coaxial, contra-rotating rotors powered by a simple spring similar to a bow saw, now accepted as the first powered helicopter.
Attempts at man-powered flight still persisted. Paucton's rotorcraft was man-powered, while another approach, also originally studied by da Vinci, was the use of flap valves. The flap valve is a simple hinged flap over a hole in the wing. In one direction it opens to allow air through and in the other it closes to allow an increased pressure difference. An early example was designed by Bauer in 1764. later in 1808 Jacob Degen built an ornithopter with flap valves, in which the pilot stood on a rigid frame and worked the wings with a movable horizontal bar. His 1809 attempt at flight failed, so he then added a small hydrogen balloon and the combination achieved some short hops. Popular illustrations of the day depicted his machine without the balloon, leading to confusion as to what had actually flown. In 1811 Albrecht Berblinger built an ornithopter based on Degen's design but omitted the balloon, plunging instead into the Danube. The fiasco did have an upside: George Cayley, also taken in by the illustrations, was spurred to publish his findings to date "for the sake of giving a little more dignity to a subject bordering upon the ludicrous in public estimation." and the modern era of aviation was born.
The 18th Century
Throughout the 18th century, tower jumping was replaced by the equally fatal but equally popular balloon jumping as a way to demonstrate the continued uselessness of man-power and flapping wings. Meanwhile the scientific study of heavier-than-air flight began in earnest.
Sir George Cayley and the first modern aircraft
Sir George Cayley was first called the "father of the aeroplane" in 1846. During the last years of the previous century he had begun the first rigorous study of the physics of flight and would later design the first modern heavier-than-air craft. Among his many achievements, his most important contributions to aeronautics include:
- Clarifying our ideas and laying down the principles of heavier-than-air flight.
- Reaching a scientific understanding of the principles of bird flight.
- Conducting scientific aeroodynamic experiments demonstrating drag and streamlining, movement of the centre of pressure, and the increase in lift from curving the wing surface.
- Defining the modern aeroplane configuration comprising a fixed wing, fuselage and tail assembly.
- Demonstrations of manned, gliding flight.
- Setting out the principles of power-to-weight ratio in sustaining flight.
From the age of ten Cayley began studying the physics of bird flight and his school notebooks contained sketches in which he was developing his ideas on the theories of flight. It has been claimed that these sketches show that Cayley modeled the principles of a lift-generating inclined plane as early as 1792 or 1793.
In 1796 Cayley made a model helicopter of the form commonly known as a Chinese flying top, unaware of Launoy and Bienvenu's model of similar design. He regarded the helicopter as the best design for simple vertical flight, and later in his life in 1854 he made an improved model. He gave a Mr. Cooper credit for being the first person to improve on "the clumsy structure of the toy" and reports Cooper's model as ascending twenty or thirty feet. Cayley made one and a Mr. Coulson made a copy, described by Cayley as "a very beautiful specimen of the screw propellor in the air" and capable of flying over ninety feet high.
Cayley's next innovations were twofold: the adoption of the whirling arm test rig, invented in the previous century by Benjamin Robbins to investigate aerodynamic drag and used soon after by John Smeaton to measure the forces on rotating windmill blades, for use in aircraft research together with the use of aerodynamic models on the arm, rather than attempting to fly a model of a complete design. He initially used a simple flat plane fixed to the arm and inclined at an angle to the airflow.
In 1799 he set down the concept of the modern aeroplane as a fixed-wing flying machine with separate systems for lift, propulsion, and control. On a small silver disc dated that year, he engraved on one side the forces acting on an aircraft and on the other a sketch of an aircraft design incorporating such modern features as a cambered wing, separate tail comprising a horizontal tailplane and vertical fin, and fuselage for the pilot suspended below the center of gravity to provide stability. The design is not yet wholly modern, incorporating as it does two pilot-operated paddles or oars which appear to work as flap valves.
He continued his researches and in 1804 constructed a model glider which was the first modern heavier-than-air flying machine, having the layout of a conventional modern aircraft with an inclined wing towards the front and adjustable tail at the back with both tailplane and fin. The wing was just a toy paper kite, flat and uncambered. A movable weight allowed adjustment of the model's centre of gravity. It was "very pretty to see" when flying down a hillside, and sensitive to small adjustments of the tail.
By the end of 1809 he had constructed the world's first full-size glider and flown it as an unmanned tethered kite. In the same year, goaded by the farcical antics of his contemporaries (see above), he began the publication of a landmark three-part treatise titled "On Aerial Navigation" (1809–1810). In it he wrote the first scientific statement of the problem, "The whole problem is confined within these limits, viz. to make a surface support a given weight by the application of power to the resistance of air." He identified the four vector forces that influence an aircraft: thrust, lift, drag and weight and distinguished stability and control in his designs. He argued that manpower alone was insufficient, and while no suitable power source was yet available he discussed the possibilities and even described the operating principle of the internal combustion engine using a gas and air mixture. However he was never able to make a working engine and confined his actual flying experiments to gliding flight. He also identified and described the importance of the cambered aerofoil, dihedral, diagonal bracing and drag reduction, and contributed to the understanding and design of ornithopters and parachutes.
He went on to publish in 1852 the design for a full-size manned glider or "governable parachute" to be launched from a balloon and then to construct a version capable of launching from the top of a hill, which carried the first adult aviator across Brompton Dale in 1853. The identity of the aviator is not known. It has been suggested variously as Cayley's coachman, footman or butler, John Appleby who may have been the coachman or another employee, or even Cayley's grandson George John Cayley. What is known is that he was the first to fly in a glider with distinct wings, fuselage and tail, and featuring inherent stability and pilot-operated controls: the first fully modern and functional heavier-than-air craft.
Minor inventions included the rubber-powered motor, which provided a reliable power source for research models. By 1808 he had even re-invented the wheel, devising the tension-spoked wheel in which all compression loads are carried by the rim, allowing a lightweight undercarriage.
The age of steam
Drawing directly from Cayley's work, Henson's 1842 design for an aerial steam carriage broke new ground. Henson proposed a 150 feet (46 m) span high-winged monoplane, with a steam engine driving two pusher configuration propellers. Although only a design, (scale models were built but they appear not to have achieved sustained flight) it was the first in history for a propeller-driven fixed-wing aircraft. Henson and his collaborator John Stringfellow even dreamed of the first Aerial Transit Company. 1866 saw the founding of the Aeronautical Society of Great Britain and two years later the world's first aeronautical exhibition was held at the Crystal Palace, London, where Stringfellow was awarded a £100 prize for the steam engine with the best power-to-weight ratio.
Francis Herbert Wenham presented the first paper to the newly formed Royal Aeronautical Society, On Aerial Locomotion. He had taken Cayley's work on cambered wings further, making important findings about both the wing aerofoil section and lift distribution. To test his ideas, from 1858 he had constructed several gliders, both manned and unmanned, and with up to five stacked wings. He concluded correctly that long, thin wings would be better than the bat-like ones suggested by many, because they would have more leading edge for their area. Today this relationship is known as the aspect ratio of a wing.
The latter part of the 19th century became a period of intense study, characterized by the "gentleman scientists" who represented most research efforts until the 20th century. Among them was the British scientist-philosopher and inventor Matthew Piers Watt Boulton, who wrote an important paper in 1864, On Aërial Locomotion, which also described lateral flight control. He was the first to patent an aileron control system in 1868.
In 1871 Wenham and Browning made the first wind tunnel. Members of the Society used the tunnel and learned that cambered wings generated considerably more lift than expected by Cayley's Newtonian reasoning, with lift-to-drag ratios of about 5:1 at 15 degrees. This clearly demonstrated the possibility of building practical heavier-than-air flying machines: what remained were the problems of controlling and powering the craft.
By the 1870s, lightweight steam engines had developed sufficiently for their experimental use in aircraft. The first aircraft known to have taken off and flown at a sustained height (of six inches under its own power was a large 120 lb. (54.4 kg) model tandem-wing monoplane, the "Aerial Steamer," made by Thomas Moy in 1875. Moy's steam engine produced just 3 hp to drive twin propellers mounted in between the fore and aft wings.
Meanwhile the British advances had galvanised French researchers. in 1857 Félix du Temple proposed a monoplane having swept forward wings with slight dihedral, a tail plane and retractable undercarriage. It was to be powered by steam. Developing his ideas with a model powered first by clockwork and later by steam, he eventually achieved a short hop with a full-size manned craft in 1874. His "Monoplane" was a large aircraft made of aluminium, with a wingspan of 42 ft 8 in (13 m) and a weight of only 176 lb (80 kg) without the pilot. Several trials were made with the aircraft, and it achieved lift off under its own power after a ski-jump run, glided for a short time and returned safely to the ground, making it the first successful powered hop in history, a year ahead of Moy's sustained flight.
In 1864 Le Comte Ferdinand Charles Honore Phillipe d'Esterno published a study On The Flight Of Birds (Du Vol des Oiseaux, and the next year Louis Pierre Mouillard published an influential fiction The Empire Of The Air (L'Empire de L'Air).
In 1856, Frenchman Jean-Marie Le Bris made the first flight higher than his point of departure, by having his glider "L'Albatros artificiel" pulled by a horse on a beach. He reportedly achieved a height of 100 meters, over a distance of 200 meters.
Alphonse Pénaud, a Frenchman living from 1850 to 1880, made significant contributions to aeronautics. He advanced the theory of wing contours and aerodynamics and constructed successful models of aeroplanes, helicopters and ornithopters. In 1871 he flew the first aerodynamically stable fixed-wing aeroplane, a model monoplane he called the "Planophore", a distance of 40 m (131 ft). Pénaud's model incorporated several of Cayley's discoveries, including the use of a tail, wing dihedral for inherent stability, and rubber power. The planophore also had longitudinal stability, being trimmed such that the tailplane was set at a smaller angle of incidence than the wings, an original and important contribution to the theory of aeronautics. Pénaud's later project for an amphibian aeroplane, although never built, incorporated other modern features. A tailless monoplane with a single vertical fin and twin tractor propellers, it also featured hinged rear elevator and rudder surfaces, retractable undercarriage and a fully enclosed, instrumented cockpit.
Equally authoritative as a theorist was Pénaud's fellow countryman Victor Tatin. In 1879 he flew a model which, like Pénaud's project, was a monoplane with twin tractor propellers but also had a separate horizontal tail. It was powered by compressed air, with the air tank forming the fuselage.
In Russia, Alexander Mozhaiski constructed a steam-powered monoplane driven by one large tractor and two smaller pusher propellers. In 1884 it was launched from a ramp and remained airborne for 98 ft.
That same year in France, Alexandre Goupil published his work on La Locomotion Aérienne (Aerial locomotion), although the flying machine he later constructed failed to fly.
Sir Hiram Maxim was an American who moved to England and changed his nationality. He chose to largely ignore his contemporaries and built his own whirling arm rig and wind tunnel. From the late 1890s he made many experiments and developed a biplane design which he patented in 1891 and completed as a test rig three years later. It was an enormous machine for its day with a wingspan of 105 feet (32 m), a length of 145 feet (44 m), fore and aft horizontal surfaces and a crew of three. Twin propellers were powered by two lightweight compound steam engines each delivering 180 hp (134 kW). Overall weight was 7,000 pounds (3,200 kg). Later modifications would add more wing surfaces as shown in the illustration. Its purpose was for research and it was neither aerodynamically stable nor controllable, so it ran on a 1,800 feet (550 m) track with a second set of restraining rails to prevent it from lifting off, somewhat in the manner of a roller coaster. In 1894 the machine developed enough lift to take off, breaking one of the restraining rails and being damaged in the process. Maxim then abandoned work on it, but would return to aeronautics in the 20th century to test a number of smaller designs powered by internal combustion engines.
One of the last of the steam-powered pioneers, like Maxim ignoring his contemporaries who had moved on (see next section), was Clément Ader. His Éole of 1890 was a bat-winged tractor monoplane which achieved a brief, uncontrolled hop, thus becoming the first heavier-than-air machine to take off under its own power. However his similar but larger Avion III of 1897, notable only for having twin steam engines, failed to fly at all: Ader would later claim success and was not debunked until 1910 when the French Army published its report on his attempt.
Learning to glide
The glider constructed with the help of Massia and flown briefly by Biot in 1879 was based on the work of Mouillard and was still bird-like in form. It is preserved the Musee de l'Air, France, and is claimed to be the earliest man-carrying flying machine still in existence.
In the last decade or so of the 18th century, while Maxim and Ader were reliving the past, a number of key figures were refining and defining the modern aeroplane. The Englishman Horatio Phillips made key contributions to aerodynamics. The German Otto Lillienthal and the American Octave Chanute worked independently on gliding flight. Lillienthal published a book on bird flight and went on, from 1891 to 1896, to construct a series of gliders, of various monoplane, biplane and triplane configurations, to test his theories. He made thousands of flights and at the time of his death was working on motor-powered gliders.
Phillips conducted extensive wind tunnel research on aerofoil sections, using steam as the working fluid. He proved the principles of aerodynamic lift foreseen by Cayley and Wenham and, from 1884, took out several patents on aerofoils. His findings underpin all modern aerofoil design. Phillips would later develop theories on the design of multiplanes, which he went on to show were unfounded.
Starting in the 1880s advances were made in construction that led to the first truly practical gliders. Three people in particular were active: Otto Lilienthal, Percy Pilcher and Octave Chanute. One of the first modern gliders appears to have been built by John J. Montgomery; it flew one flight outside of San Diego on August 28, 1883. Montgomery discussed his flying during the 1893 Aeoraunical Conference in Chicago and Chanute published Montgomery's comments in December 1893 in the American Engineer & Railroad Journal. Another hang-glider had been constructed by Wilhelm Kress as early as 1877 near Vienna.
Otto Lilienthal was known as the "Glider King" or "Flying Man" of Germany. He duplicated Wenham's work and greatly expanded on it in 1884, publishing his research in 1889 as Birdflight as the Basis of Aviation (Der Vogelflug als Grundlage der Fliegekunst). He also produced a series of gliders of a type now known as the hang glider, including bat-wing, monoplane and biplane forms, such as the Derwitzer Glider and Normal soaring apparatus. Starting in 1891 he became the first person to make controlled untethered glides routinely, and the first to be photographed flying a heavier-than-air machine, stimulating interest around the world. He rigorously documented his work, including photographs, and for this reason is one of the best known of the early pioneers. He also promoted the idea of "jumping before you fly", suggesting that researchers should start with gliders and work their way up, instead of simply designing a powered machine on paper and hoping it would work. Lilienthal made over 2,000 glides until his death in 1896 from injuries sustained in a glider crash. Lilienthal had also been working on small engines suitable for powering his designs at the time of his death.
Picking up where Lilienthal left off, Octave Chanute took up aircraft design after an early retirement, and funded the development of several gliders. In the summer of 1896 his team flew several of their designs many times at Miller Beach, Indiana, eventually deciding that the best was a biplane design. Like Lilienthal, he documented his work and also photographed it, and was busy corresponding with like-minded researchers around the world. Chanute was particularly interested in solving the problem of aerodynamic instability of the aircraft in flight, which birds compensate for by instant corrections, but which humans would have to address either with stabilizing and control surfaces or by moving the center of gravity of the aircraft, as Lilienthal did. The most disconcerting problem was longitudinal instability (divergence), because as the angle of attack of a wing increases, the center of pressure moves forward and made the angle increase more. Without immediate correction, the craft would pitch up and stall. Much more difficult to understand was the relationship between lateral and directional control.
Also in Britain Percy Pilcher, who had worked for Maxim and had built and successfully flown several gliders during the mid to late 1890s, constructed a prototype powered aircraft in 1899 which, recent research has shown, would have been capable of flight. However, like Lilienthal he died in a glider accident before he was able to test it.
Publications such as Octave Chanute'sProgress in Flying Machines of 1894 and James Means' The Problem of Manflight (1894) and Aeronautical Annuals (1895–1897) helped bring current research and events to a wider audience.
The invention of the box kite during this period by the Australian Lawrence Hargrave led to the development of the practical biplane. In 1894 Hargrave linked four of his kites together, added a sling seat, and flew 16 feet (4.9 m). By demonstrating to a sceptical public that it was possible to build a safe and stable flying machine, Hargrave opened the door to other inventors and pioneers. Hargrave devoted most of his life to constructing a machine that would fly. He believed passionately in open communication within the scientific community and would not patent his inventions. Instead, he scrupulously published the results of his experiments in order that a mutual interchange of ideas may take place with other inventors working in the same field, so as to expedite joint progress. Octave Chanute became convinced that multiple wing planes were more effective than a monoplane and introduced the "strut-wire" braced wing structure which, with its combination of rigidity and lightness, would in the form of the biplane come to dominate aircraft design for decades to come. The inventor of the box kite Lawrence Hargrave also experimented in the 1880s with monoplane models and by 1889 had constructed a rotary engine driven by compressed air.
Even balloon jumping began to succeed. in 1905 Daniel Maloney was carried by balloon in a tandem-wing glider designed by John Montgomery to an altitude of 4,000 ft. before being released, gliding down and landing at a predetermined location as part of a large public demonstration of aerial flight at Santa Clara, California. However after several successful jumps Maloney's glider collided with a balloon cable and Maloney fell to his death.
Powered, controlled flight
Powered, controlled flight was finally achieved around the turn of the century.
Langley - a brave failure
After a distinguished career in astronomy and shortly before becoming Secretary of the Smithsonian Institution, Samuel Pierpont Langley started a serious investigation into aerodynamics at what is today the University of Pittsburgh. In 1891 he published Experiments in Aerodynamics detailing his research, and then turned to building his designs. He hoped to achieve automatic aerodynamic stability, so he gave little consideration to in-flight control. On May 6, 1896, Langley's Aerodrome No. 5 made the first successful sustained flight of an unpiloted, engine-driven heavier-than-air craft of substantial size. It was launched from a spring-actuated catapult mounted on top of a houseboat on the Potomac River near Quantico, Virginia. Two flights were made that afternoon, one of 1,005 metres (3,297 ft) and a second of 700 metres (2,300 ft), at a speed of approximately 25 miles per hour (40 km/h). On both occasions the Aerodrome No. 5 landed in the water as planned, because in order to save weight, it was not equipped with landing gear. On November 28, 1896, another successful flight was made with the Aerodrome No. 6. This flight, of 1,460 metres (4,790 ft), was witnessed and photographed by Alexander Graham Bell. The Aerodrome No. 6 was actually Aerodrome No. 4 greatly modified. So little remained of the original aircraft that it was given a new designation.
With the successes of the Aerodrome No. 5 and No. 6, Langley started looking for funding to build a full-scale man-carrying version of his designs. Spurred by the Spanish-American War, the U.S. government granted him $50,000 to develop a man-carrying flying machine for aerial reconnaissance. Langley planned on building a scaled-up version known as the Aerodrome A, and started with the smaller Quarter-scale Aerodrome, which flew twice on June 18, 1901, and then again with a newer and more powerful engine in 1903.
With the basic design apparently successfully tested, he then turned to the problem of a suitable engine. He contracted Stephen Balzer to build one, but was disappointed when it delivered only 8 hp (6 kW) instead of 12 hp (9 kW) he expected. Langley's assistant, Charles M. Manly, then reworked the design into a five-cylinder water-cooled radial that delivered 52 hp (39 kW) at 950 rpm, a feat that took years to duplicate. Now with both power and a design, Langley put the two together with great hopes.
To his dismay, the resulting aircraft proved to be too fragile. Simply scaling up the original small models resulted in a design that was too weak to hold itself together. Two launches in late 1903 both ended with the Aerodrome immediately crashing into the water. The pilot, Manly, was rescued each time. ALso, the aircraft's control system was inadequate to allow quick pilot responses, and it had no method of lateral control, and the Aerodrome's aerial stability was marginal.
Langley's attempts to gain further funding failed, and his efforts ended. Nine days after his second abortive launch on December 8, the Wright brothers successfully flew their Flyer. Glenn Curtiss made 93 modifications to the Aerodrome and flew this very different aircraft in 1914. Without acknowledging the modifications, the Smithsonian Institution asserted that Langley's Aerodrome was the first machine "capable of flight".
Gustave Weißkopf was a German who emigrated to the U.S., where he soon changed his name to Whitehead. From 1897 to 1915 he designed and built early flying machines and engines. One person said that he flew a steam-powered monoplane about half a mile and crashed into a three-story building in Pittsburgh in 1899. On August 14, 1901, two and a half years before the Wright Brothers' flight, Whitehead claimed to have carried out a controlled, powered flight in his Number 21 monoplane at Fairfield, Connecticut. The flight was reported in the Bridgeport Sunday Herald local newspaper; about 30 years later, several people questioned by a researcher claimed to have seen that or other Whitehead flights.
Whitehead claimed two more flights on January 17, 1902 using his Number 22 monoplane. He described it as having a 40 hp motor with twin tractor propellers, and claimed to have flown a 10 km circle; control by differential propeller speed and rudder.
For many years the Whitehead claims were ignored or dismissed by mainstream aviation historians. In March 2013 Jane's All the World's Aircraft published an editorial which accepted Whitehead's flight as the first manned, powered, controlled flight of a heavier-than-air craft. The Smithsonian Institution disagreed that Whitehead flew as reported.
The Wright brothers
The Wrights solved both the control and power problems that confronted aeronautical pioneers. They invented roll control using wing warping and combined roll with simultaneous yaw control using a steerable rear rudder. Although wing-warping as a means of roll control was used only briefly during the early history of aviation, the innovation of combining roll and yaw control was a fundamental advance in flight control. For pitch control, the Wrights used a forward elevator (canard), another design element that later became outmoded.
The Wrights made rigorous wind-tunnel tests of airfoils and flight tests of full-size gliders. They not only built a working powered aircraft, the Wright Flyer, but also significantly advanced the science of aeronautical engineering.
They concentrated on the controllability of unpowered aircraft before attempting to fly a powered design. From 1900 to 1902, they built and flew a series of three gliders. The first two were much less efficient than the Wrights expected, based on experiments and writings of their 19th-century predecessors. Their 1900 glider had only about half the lift they anticipated, and the 1901 glider performed even more poorly, until makeshift modifications made it serviceable.
Seeking answers, the Wrights constructed their own wind tunnel and equipped it with a sophisticated measuring device to calculate lift and drag of 200 different model-size wing designs they created. As a result, the Wrights corrected earlier mistakes in calculations of lift and drag and used this knowledge to construct their 1902 glider, third in the series. It became the first manned heavier than air flying machine that was mechanically controllable in all three axes: pitch, roll and yaw. Its pioneering design also included wings with a higher aspect ratio than the previous gliders. The brothers successfully flew the 1902 glider hundreds of times, and it performed far better than their earlier two versions.
To obtain adequate power for their engine-driven Flyer, the Wrights designed and built a low-powered internal combustion engine. Using their wind tunnel data, they designed and carved wooden propellers that were more efficient than any before, enabling them to gain adequate performance from their low engine power. The Flyer's design was also influenced by the desire of the Wrights to teach themselves to fly safely without unreasonable risk to life and limb, and to make crashes survivable. The limited engine power resulted in low flying speeds and the need to take off into a headwind.
According to the Smithsonian Institution and Fédération Aéronautique Internationale (FAI), the Wrights made the first sustained, controlled, powered heavier-than-air manned flight at Kill Devil Hills, North Carolina, four miles (8 km) south of Kitty Hawk, North Carolina on December 17, 1903. The first flight by Orville Wright, of 120 feet (37 m) in 12 seconds, was recorded in a famous photograph. In the fourth flight of the same day, Wilbur Wright flew 852 feet (260 m) in 59 seconds. Modern analysis by Professor Fred E. C. Culick and Henry R. Rex (1985) has demonstrated that the 1903 Wright Flyer was so unstable as to be almost unmanageable by anyone but the Wrights, who had trained themselves in the 1902 glider.
The Wrights continued developing their flying machines and flying at Huffman Prairie near Dayton, Ohio in 1904–05. After a crash in 1905, they rebuilt the Flyer III and made important design changes. They almost doubled the size of the elevator and rudder and moved them about twice the distance from the wings. They added two fixed vertical vanes (called "blinkers") between the elevators, and gave the wings a very slight dihedral. They disconnected the rudder from the wing-warping control, and as in all future aircraft, placed it on a separate control handle. The Flyer III became the first practical aircraft (though without wheels and using a launching device), flying consistently under full control and bringing its pilot back to the starting point safely and landing without damage. On 5 October 1905, Wilbur flew 24 miles (39 km) in 39 minutes 23 seconds."
Eventually the Wrights would abandon the foreplane altogether, with the Model B of 1910 instead having a tail plane in the manner which was by then becoming conventional.
According to the April 1907 issue of the Scientific American magazine, the Wright brothers seemed to have the most advanced knowledge of heavier-than-air navigation at the time. However, the same magazine issue also claimed that no public flight had been made in the United States before its April 1907 issue. Hence, they devised the Scientific American Aeronautic Trophy in order to encourage the development of a heavier-than-air flying machine.
Once powered, controlled flight had been achieved, progress was still needed to create a practical flying machine for general use.
The history of early powered flight is very much the history of early engine construction. The Wrights designed their own engines. They used a single flight engine, a 12 hp water-cooled four-cylinder inline type with five main bearings and fuel injection. Whitehead's craft was powered by two engines of his design: a ground engine of 10 hp (7.5 kW) which drove the front wheels in an effort to reach takeoff speed and a 20 hp (15 kW) acetylene engine powering the propellers. Whitehead was an experienced machinist, and he is reported to have raised funds for his aircraft by making and selling engines to other aviators. Most early engines were neither powerful nor reliable enough for practical use, and the development of improved engines went hand-in-hand with improvements in the airframes themselves.
In Europe, Léon Levavasseur's Antoinette 8V V-8 engine dominated flight for several years after it was introduced in 1906, powering many notable craft of that era. Incorporating direct fuel injection, evaporative water cooling and other advanced features, it generated around 50 hp.
The British Green C.4 of 1908 followed the Wright's pattern of a four-cylinder inline water-cooled design but produced 52 hp. It powered many successful pioneer aircraft including those of A.V. Roe.
Horizontally opposed designs were also produced. The four-cylinder water-cooled de Havilland Iris achieved 45 hp but was little used, while the successful two-cylinder Nieuport design achieved 28 hp (21 kW) in 1910.
1909 saw radial engine forms rise to significance. The Anzani 3-cylinder semi-radial or fan engine of 1909 developed only 25 hp but was much lighter than the Antoinette, and was chosen by Louis Blériot for his cross-Channel flight. More revolutionary was the Seguin brothers' Gnome 50 hp monosoupape (single-valve) air-cooled five-cylinder rotary engine. In a rotary engine, the crank shaft is bolted to the airframe and the whole engine casing and cylinders rotate with the propeller. Although this type had been introduced as long ago as 1887 by Lawrence Hargrave, improvements made to the Gnome created a robust, reliable and practical design which revolutionised aviation and would see continuous development over the next ten years. Fuel was introduced into each cylinder direct from the crank case meaning that only an exhaust valve was required. The larger and more powerful nine-cylinder le Rhone 80 hp rotary was introduced in 1913 and was widely adopted for military use.
Inline and vee types remained popular, with the German company Mercedes producing a series of water-cooled six-cylinder models. In 1913 they introduced the highly successful 75 kW (100 hp) D.I series.
Lift and efficiency
The lightness and strength of the biplane is offset by the inefficiency inherent in placing two wings so close together. Biplane and monoplane designs vied with each other, with both still in production by the outbreak of war.
A notable development, although a failure, was the first cantilever monoplane ever built. The Antoinette Monobloc of 1911 had a fully enclosed cockpit and faired undercarriage but its V-8 engine's 50 hp output was not enough for it to fly for more than a few feet at most. More successful was the Deperdussin braced monoplane, which won the inaugural 1913 Schneider Trophy race flown by Maurice Prévost, completing 28 circuits of the 10 km (6.2 mi) course with an average speed of 73.63 km/h (45.75 mph).
Triplanes too were experimented with, notably a series built between 1909 and 1910 by the British pioneer A.V. Roe. Going one better with four wings the quadruplane too made rare appearances. The multiplane, having large numbers of very thin wings, was also experimented with, most successfully by Horatio Phillips. His final prototype confirmed the inefficiency and poor performance of the idea.
Other radical approaches to wing design were also being tried. The American inventor Alexander Graham Bell devised a cellular octahedral wing form which, like the multiplane, proved disappointingly inefficient. Other lacklustre performers included the Edwards Rhomboidal, the Lee-Richards annular wing and varying numbers of wings one after the other in tandem.
Many of these early experimental forms were in principle quite practical and have since reappeared.
Stability and control
Early work had focused primary on making a craft stable enough to fly but failed to offer full controllability, while the Wrights had sacrificed stability in order to make their Flyer fully controllable. A practical aircraft requires both. Although stability had been achieved by several designs, the principles were not fully understood and progress was erratic. The aileron slowly replaced wing warping for lateral control although designers sometimes, as with the Blériot XI, returned briefly to wing warping. Similarly, all-flying tail surfaces gave way to fixed stabilizers with hinged control surfaces attached. The canard pusher configuration of the early Wright Flyers was supplanted by tractor propeller aircraft designs.
In France, progress was relatively rapid.
In 1906 the Brazilian Alberto Santos-Dumont made a public flight in France with his 14-bis, also known as Oiseau de proie (French for "bird of prey"). A canard pusher biplane with pronounced wing dihedral, it had a Hargrave-style box-cell wing with a forward-mounted "boxkite" assembly which was movable to act as both elevator and rudder. He later added auxiliary surfaces between the wings as primitive ailerons providing lateral control. His was the first flight verified by the Aéro-Club de France of a powered heavier-than-air machine in Europe and won the Deutsch-Archdeacon Prize for the first officially observed flight further than 25 meters. It later set the first world record recognized by the Federation Aeronautique Internationale by flying 220 meters in 21.5 seconds.
The next year, in 1907, Louis Blériot flew his Blériot VII, a tractor monoplane with full three-axis control using the horizontal tail surfaces as combined elevators and ailerons. Where Horatio Phillips and Trajan Vuia had failed, Blériot's was the first practical tractor monoplane and marked the start of a trend in French aviation. By 1909 he had developed this configuration to the point where the Blériot XI was able to cross the English Channel, among other refinements confining the tail surfaces to the elevator function and using wing warping for lateral control.
Santos-Dumont had continued to make significant contributions to the field of aircraft design. His last design, the Demoiselle series (Nos. 19 to 22), was also a tractor monoplane. It was fully controllable in flight by a tail unit that functioned both as elevator and rudder, and by wing warping (No. 20). The fuselage of the 1908 Demoiselle No 19 consisted of three reinforced bamboo booms, with the pilot's seat located between the main wheels of a tricycle landing gear. The Demoiselle could be constructed in only 15 days and it became the world's first series production aircraft. In 1909 it was offered with a choice of 3 engines: a Clement 20 hp, a Wright 4-cyl 30 hp (Clement-Bayard had the license to manufacture Wright engines), and a Clement-Bayard 40 hp designed by Pierre Clerget. The Demoiselle achieved 120 km/h. Santos-Dumont made the drawings of the Demoiselle available free of charge, hoping that aviation would lead to a new prosperous era for mankind. Popular Mechanics magazine reproduced the drawings and stated, "This machine is better than any other which has ever been built, for those who wish to reach results with the least possible expense and with a minimum of experimenting."
The designs of the French pioneer Léon Levavasseur are better known by the name of the Antoinette company for which he worked. His Antoinette IV of 1908, contemporary with the Demoiselle, was a fully modern conventional monoplane with tailplane and fin each bearing movable control surfaces, and ailerons on the wings. The ailerons were not sufficiently effective and on later models were replaced by wing warping.
Others around the world were making and selling pusher biplanes based on the Wright design, most often fitted with an additional stabilising tailplane as well as the control foreplane. In France in 1908 the Voisin brothers sold elsewhere an aircraft ordered by Henri Farman. In his outrage he built his own, adapting their design chiefly by adding effective ailerons. Following further modifications to the tail empennage and ailerons, the Farman III became the most popular aeroplane sold between 1909 and 1911. In Britain the American expatriate Samuel Cody flew a Wright-type flyer in 1908, incorporating a tailplane as well as a small foreplane. In 1910 an improved model fitted with between-wing ailerons won the first Michelin Cup air race, while Geoffrey de Havilland's second Farman-style aircraft had ailerons on the upper wing and became the Royal Aircraft Factory F.E.1 and the Bristol Boxkite was manufactured in quantity. In the USA too, Glenn Curtiss had flown first the AEA June Bug and then his Golden Flyer, which in 1910 achieved the first naval deck landing and takeoff. Meanwhile the Wrights themselves had also been wrestling with the problem of achieving both stability and control, experimenting further with the foreplane before first adding a second small plane at the tail and then finally removing the foreplane altogether. They announced their two-seat Model B in 1910 and licensed it for production in 1911 as the Burgess Model F.
Many other more radical shapes were tried, with only a few showing any promise. In the United Kingdom, J. W. Dunne developed a series of tailless pusher designs having swept wings with a conical upper surface. His D.5 biplane flew in 1910 and proved fully stable. Dunne deliberately avoided full three-axis control, devising instead a system which was easier to operate and which he regarded as far safer in practice. Dunne's system would not be widely adopted. His tailless design reached its peak with the D.8 which was manufactured under license in France by Nieuport and in the USA as the Burgess-Dunne, however it was rejected as a practical warplane by the British Army, in which Dunne was an officer, because it was too stable and hence not manoeuvrable enough in battle.
A problem with early seaplanes was the tendency for suction between the water and the aircraft as speed increased, holding the aircraft down and hindering takeoff. The British designer Porte invented the technique of placing a step in the bottom of the aircraft to break the suction, and this was incorporated in the 1914 Curtiss Model H.
Aeroplanes were first used in action during the Italo-Turkish War of 1911-1912.
Some types developed during this period would see military service into, or even throughout, World War I. These include the Etrich Taube of 1910, Fokker Spin of 1911, Royal Aircraft Factory BE.2, Sopwith Tabloid/Schneider and a variety of obsolescent types used for pilot training.
The Sikorsky Ilya Muromets was a large multi-engined biplane which first flew in 1914 just before the outbreak of World War I.
The early work on powered rotor lift was followed up by later investigators, independently from the development of fixed-wing aircraft.
In 1877, Enrico Forlanini developed an unmanned helicopter powered by a steam engine. It rose to a height of 13 meters, where it remained for some 20 seconds, after a vertical take-off in Milan.
In 18th Century France, an association was set up to collaborate on helicopter designs, of which there were many. In 1863 Gustave de Ponton d'Amécourt constructed a model using the established counter-rotating rotors. Initially powered by steam it failed, but a clockwork version did fly. Other designs, covering a wide variety of forms, included Pomés and De la Pauze (1871), Pénaud, Achenbach (1874), Dieuaide (1887), Melikoff (1877), Forlanini (1877), Castel (1878) and Dandrieux (1878-79). Of these, Forlanini's steam-powered contra-rotating model flew for 20 seconds and Dandrieux' rubber-powered model also flew.
Hiram Maxim's father conceived of a helicopter powered by two counter-rotating rotors, but was unable to find a powerful enough engine to build it. Hiram himself sketched out plans for a helicopter in 1872 before turning his attention to fixed-wing flight.
In 1907 the French Breguet-Richet Gyroplane No. 1 lifted off in a "tethered" test flight, becoming the first manned helicopter to rise from the ground. It rose about 60 cm (2 ft) and hovered for a minute. However, the flight proved to be extremely unsteady.
- Book of Han, Biography of Wang Mang, 或言能飞，一日千里，可窥匈奴。莽辄试之，取大鸟翮为两翼，头与身皆著毛，通引环纽，飞数百步堕
- White 1961, pp. 100–101.
- "First Flights". Saudi Aramco World 15 (1): 8–9. January/February 1964.
- Wragg 1974, p. 10.
- Wragg 1974, p. 57.
- Deng & Wang 2005, p. 122.
- "Amazing Musical Kites". Cambodia Philately.
- "Kite Flying for Fun and Science" (pdf). The New York Times. 1907.
- Sarak, Sim; Yarin, Cheang (2002). "Khmer Kites". Ministry of Culture and Fine Arts, Cambodia.
- Needham 1965a, p. 127.
- Tarlton, John. "Ancient Maori Kites". Ancient Maori Kites. Retrieved 19 October 2011.
- Wragg 1974, p. 16.
- （永 定三年）使元黄头与诸囚自金凤台各乘纸鸱以飞，黄头独能至紫陌乃堕，仍付御史中丞毕义云饿杀之。(Rendering: [In the 3rd year of Yongding, 559], Gao Yang conducted an experiment by having Yuan Huangtou and a few prisoners launch themselves from a tower in Ye, capital of the Northern Qi. Yuan Huangtou was the only one who survived from this flight, as he glided over the city-wall and fell at Zimo [western segment of Ye] safely, but he was later executed.) Zizhi Tongjian 167.
- Leishman, J. Gordon (2006). Principles of Helicopter Aerodynamics. Cambridge aerospace 18. Cambridge: Cambridge University Press. pp. 7–9. ISBN 978-0-521-85860-1.
- Donahue, Topher (2009). Bugaboo Dreams: A Story of Skiers, Helicopters and Mountains. Rocky Mountain Books Ltd. p. 249. ISBN 978-1-897522-11-0.
- Needham 1965b, pp. 583-587.
- Deng & Wang 2005, p. 113.
- Ege 1973, p. 6.
- Wragg 1974, pp. 10-11.
- Fairlie & Cayley 1965, p. 163.
- Popham, A.E. (1947). The drawings of Leonardo da Vinci (2nd ed.). Jonathan Cape.
- "Dreams of Leonardo". Public Broadcasting Service. October 2005. – describes the building and successful flight of a glider based on Leonardo's design
- Wragg 1974, p. 11.
- Ege 1973, p. 7.
- Ege 1973, pp. 97-100.
- Ege 1965, p. 105.
- "M. Santos Dumont Rounds Eiffel Tower" (pdf). The New York Times. 20 October 1901.
- Wragg 1974, pp. 11-12, 23.
- Wragg 1974, pp. 12-14.
- Needham 1965b, p. 591.
- Harrison, James Pinckney (2000). Mastering the Sky. Da Capo Press. p. 27. ISBN 978-1-885119-68-1.
- Quoted in O'Conner, Patricia T. (17 November 1985). "In Short: Nonfiction; Man Was Meant to Fly, But Not at First". The New York Times.
- "Burattini's Flying Dragon" (pdf). FLIGHT International. 9 May 1963.
- Söderberg, Henry (1988). Swedenborg's 1714 airplane: a machine to fly in the air. p. 32. ISBN 0-87785-138-7.
- Wragg 1974, p. 14.
- Angelucci & Matricardi 1977, pp. 12-13.
- Wragg 1974, pp. 57-58.
- Fairlie & Cayley 1965, p. 158.
- Dee, Richard (2007). The Man who Discovered Flight: George Cayley and the First Airplane. Toronto: McClelland and Stewart. ISBN 978-0-7710-2971-4.
- Fairlie & Cayley 1965, pp. 160-161.
- Anderson (1997), pp.55-8
- "Aviation History". Retrieved 26 July 2009. "In 1799 he set forth for the first time in history the concept of the modern aeroplane. Cayley had identified the drag vector (parallel to the flow) and the lift vector (perpendicular to the flow)."
- "Sir George Cayley (British Inventor and Scientist)". Britannica. Retrieved 26 July 2009. "English pioneer of aerial navigation and aeronautical engineering and designer of the first successful glider to carry a human being aloft. Cayley established the modern configuration of an aeroplane as a fixed-wing flying machine with separate systems for lift, propulsion, and control as early as 1799."
- Fairlie & Cayley 1965, p. 165.
- Wragg 1974, p. 64.
- Gibbs-Smith 2003, p. 35
- Fairlie & Cayley 1965, p. 169.
- Cayley, G.; On Aerial Navigation Part 1, Page 3, "Probably a much cheaper engine of this sort might be produced by a gas-light apparatus, and by firing the inflammable air generated, with a due portion of common air, under a piston."
- Wragg 1974, p. 60.
- Angelucci & Matricardi 1977, p. 14.
- Fairlie & Cayley 1965, p. 157.
- Pritchard, J. Laurence. Summary of First Cayley Memorial Lecture at the Brough Branch of the Royal Aeronautical Society Flight number 2390 volume 66 page 702, 12 November 1954. Retrieved: 29 May 2010. "In thinking of how to construct the lightest possible wheel for aerial navigation cars, an entirely new mode of manufacturing this most useful part of locomotive machines occurred to me: vide, to do away with wooden spokes altogether, and refer the whole firmness of the wheel to the strength of the rim only, by the intervention of tight cording."
- Jarrett 2002, p. 53.
- Stokes 2002, pp. 163–166, 167–168.
- Magoun, F. Alexander; Hodgins, Eric (1931). A History of Aircraft. Whittlesey House. p. 308.
- "The Cross-licensing Agreement". NASA. Retrieved 2009-03-07.
- Yoon, Joe (17 November 2002). "Origins of Control Surfaces". AerospaceWeb.
- Gibbs-Smith, C.H. (2000) . Aviation: An Historical Survey From Its Origins To The End Of The Second World War. Science Museum. p. 54. ISBN 978-1-900747-52-3.
- "Wind Tunnels". NASA. Archived from the original on 2008-09-11.
- Frank H. Wenham, inventor of the wind tunnel, 1871, was a fan, driven by a steam engine, propelled air down a 12 ft (3.7 m) tube to the model.
- Jarrett 2002, pp. 59–60.
- Gibbs-Smith, C.H. (2000). Aviation. London: NMSI. p. 56. ISBN 1900747529.
- "Death Of Sir Hiram Maxim. A Famous Inventor, Automatic Guns And Aeronautics". The Times. 25 November 1916.
- Beril, Becker (1967). Dreams and Realities of the Conquest of the Skies. New York: Atheneum. pp. 124–125.
- Jarrett 2002, p. 87.
- Lawrence Hargrave (1850-1915). "The Pioneers : An Anthology". Centre for Telecommunications and Information Engineering. Monash University.
- Anderson, John David (2004). Inventing Flight: The Wright Brothers & Their Predecessors. JHU Press. p. 145. ISBN 0801868750.
- Hallion, Richard P. (2003). Taking Flight:Inventing the Aerial Age, from Antiquity through the First World War. New York: Oxford University Press. pp. 294–295. ISBN 0195160355.
- "Popular Aviation". 1935. at Wright Brothers Aeroplane Company
- Paul Jackson; Executive Overview: Jane's All the World's Aircraft: Development & Production – 'Justice delayed is justice denied' (2013)
- Budd Davisson; Who Was First? The Wrights or Whitehead? Flight Journal (2013)
- Dodson, MG (2005), "An Historical and Applied Aerodynamic Study of the Wright Brothers' Wind Tunnel Test Program and Application to Successful Manned Flight", US Naval Academy Technical Report, USNA-334, retrieved 2009-03-11
- Smithsonian Institution, "The Wright Brothers & The Invention of the Aerial Age"
- " 100 Years Ago, the Dream of Icarus Became Reality." FAI NEWS, December 17, 2003. Retrieved: January 5, 2007.
- "Telegram from Orville Wright in Kitty Hawk, North Carolina, to His Father Announcing Four Successful Flights, 1903 December 17". World Digital Library. 1903-12-17. Retrieved 2013-07-21.
- Abzug, Malcolm J. and E. Eugene Larrabee."Airplane Stability and Control, Second Edition: A History of the Technologies That Made Aviation Possible." cambridge.org. Retrieved: September 21, 2010.
- Dayton Metro Library Aero Club of America press release
- Reprinted in Scientific American, April 2007, page 8.
- Weissenborn, G.k.; "Did Whitehead Fly?", Air Enthusiast 35, Pilot Press, 1988.
- Jines. Ernest. "Santos Dumont in France 1906–1916: The Very Earliest Early Birds." earlyaviators.com, December 25, 2006. Retrieved: August 17, 2009.
- "Cronologia de Santos Dumont" (in Portuguese). santos-dumont.net.Retrieved: October 12, 2010.
- Hartmann, Gérard. "Clément-Bayard, sans peur et sans reproche" (French). hydroretro.net. Retrieved: November 14, 2010.
- Daniel, Clifton, ed., Chronicle of the 20th Century, Mount Kisco, New York: Chronicle Publications, 1987, ISBN 0-942191-01-3, p. 136.
- Layman 1989, p. 17.
- Crosby, Francis, The Complete Guide to Fighters & Bombers of the World: An Illustrated History of the World's Greatest Military Aircraft, From the Pioneering Days of Air Fighting in World War I Through the Jet Fighters and Stealth Bombers of the Present Day, London: Anness Publishing Ltd., 2006, ISBN 978-1-84476-917-9, p. 16.
- Jarrett 2002, p. 60.
- "Biografie - Enrico Forlanini". Mille Anne di Scienza in Italia. Retrieved 1 December 2013.
- Anderson, John D. Jnr. (1997). A History of Aerodynamics. Cambridge: Cambridge University House. ISBN 0 521 69955 3 Check
- Angelucci, Enzo; Matricardi, Paolo (1977). World aircraft: Origins-World War I. Sampson Low. ISBN 0-562-00058-5.
- Prehistory of Flight
- Octave Chanute, Progress in Flying Machines, 1891 - 1894
- Deng, Yinke; Wang, Pingxing (2005). Ancient Chinese Inventions. China Intercontinental Press. ISBN 7-5085-0837-8.
- Ege, L. (1973). Balloons and airships. Blandford.
- Fairlie, Gerard; Cayley, Elizabeth (1965). The life of a genius. Hodder and Stoughton.
- Gibbs-Smith, C. H. (2003). Aviation. NMSI. ISBN 1 900747 52 9.
- Jarrett, Philip, ed. (2002). Pioneer Aircraft: Early Aviation before 1914. London: Putnam Aeronautical Books. ISBN 0-85177-869-0.
- Jarrett, Philip (2002). "3: The Passive and Active Approaches". In Jarrett, Philip. Pioneer Aircraft: Early Aviation before 1914. London: Putnam Aeronautical Books. pp. 50–66. ISBN 0-85177-869-0.
- —— (2002). "5: Man Flies". In Jarrett, Philip. Pioneer Aircraft: Early Aviation before 1914. London: Putnam Aeronautical Books. pp. 87–103. ISBN 0-85177-869-0.
- Stokes, P. R. (2002). "9: Propulsion Systems". In Jarrett, Philip. Pioneer Aircraft: Early Aviation before 1914. London: Putnam Aeronautical Books. pp. 159–186. ISBN 0-85177-869-0.
- Needham, Joseph (1965). Science and Civilisation in China. IV (part 1).
- —— (1965). Science and Civilisation in China. IV (part 2). ISBN 978-0-521-05803-2.
- White, Lynn Townsend, Jr. (Spring 1961). "Eilmer of Malmesbury, an Eleventh Century Aviator: A Case Study of Technological Innovation, Its Context and Tradition". Technology and Culture 2 (2): 97–111.
- Wragg, D.W. (1974). Flight before flying. Osprey. ISBN 0850451655.
- "Progress of Mechanical Flight". Flight. 2 January 1909.
- Aerospaceweb - Who was the first to fly?
- Aerospaceweb - Why do Brazilians consider Alberto Santos-Dumont the first man to fly if he didn't fly until 1906 and the Wright brothers did so in 1903?
- Pre-Wright flying machines
- Aviation Pioneers: An Anthology
- The Early Birds of Aviation
- History Net article
- Plane truth: list of greatest technical breakthroughs in manned flight by Jürgen Schmidhuber, Nature 421, 689, 2003