|This article may need to be rewritten entirely to comply with Wikipedia's quality standards. (November 2009)|
||This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (June 2012)|
|M2/M4/M6 Metro-North Railcar|
An MTA-owned Budd M2 car at New Haven-Union Station, August 2006.
|Manufacturer||Budd Company/General Electric/
Tokyu Car Corporation(M4)
|Built at||Red Lion, PA|
|Family name||Budd Metropolitan|
|Entered service||M2: 1973
|Number built||M2: 244
|Number in service||M2: 42
|Number scrapped||M2: 184
|Formation||M2: Married pair
|Fleet numbers||M2: 8400-8471, 8500-8571, 8650-8669, 8700-8749, 8800-8849
M4: 8900-8935, 8951-8985
M6: 9000-9031, 9051-9081
|Line(s) served||New Haven Line|
|Car body construction||Stainless Steel|
|Train length||170 ft (51.82 m) - 1,020 ft (310.90 m)|
|Car length||85 ft 1 1⁄2 in (25,946 mm)|
|Width||10 ft 6 in (3,200 mm)|
|Height||13 ft (3,962 mm) (rail to roof)
14 ft 9 in (4,500 mm) (rail to top of resistor grid shrouding)
|Floor height||4 ft 3 1⁄16 in (1,297 mm)|
|Platform height||4 ft (1,219 mm)|
|Doors||Quarter point, double leaf automatic|
|Maximum speed||100 mph (160 km/h) (design)
80 mph (130 km/h) (service)
|Weight||126,500 lb (57,379 kg) (empty)
142,250 lb (64,524 kg) (full)
|Axle load||35,600 lb (16,148 kg)|
|Traction system||- Transformed AC overhead line current fed through mercury arc Ignitron (M2-original) rectifiers to a camshaft resistance motor controller
- Transformed AC overhead line current fed through Silicon (M2-rebuilt/M4/M6) rectifiers to a camshaft resistance motor controller
- DC third rail current fed directly to resistance controller.
|Traction motors||4x 162 hp (121 kW) GE 1259 DC motors|
|Power output||648 hp (483 kW) @ 25 mph (40 km/h)|
|Tractive effort||10,000 lbf (44.5 kN) @ 0 mph (0 km/h)
14,200 lbf (63.2 kN) @ 10 mph (16 km/h)
5,565 lbf (24.8 kN) @ 50 mph (80 km/h)
3,878 lbf (17.3 kN) @ 80 mph (130 km/h)
1,900 lbf (8.45 kN) @ 100 mph (160 km/h)
|Acceleration||2.5 mph/s (4.0 km/(h·s)) - 3 mph/s (4.8 km/(h·s)) (Starting)|
|Deceleration||3.8 mph/s (6.1 km/(h·s)) (Emergency)|
|Train heating||electric heat, air conditioning|
|Electric system(s)||11-13.5 kV 25 Hz AC (Catenary)
11-13.5 kV 60 Hz AC Catenary
660 V DC Third rail
|Current collection method||Contact shoe, Pantograph|
|Braking system(s)||Pneumatic, dynamic|
|Coupling system||WABCO Model N-2|
|Track gauge||4 ft 8 1⁄2 in (1,435 mm) standard gauge|
The M2 is a series of 244 electric multiple unit cars produced for the Metropolitan Transportation Authority and the Connecticut Department of Transportation for use on the New Haven Line (then part of Penn Central, now part of Metro North). Built primarily by General Electric in a consortium with the Budd Company and Canadian Vickers between 1972 and 1977, the cars were initially branded as Cosmopolitans. Final assembly of the M2 cars using Budd or Vickers bodies was completed at GE's Transportation Division in Erie, Pennsylvania.
Both the model and brand name followed the pattern set up by the M1/M1A series (The Metropolitans) in use on the Long Island Rail Road (M1) and on the Metro-North Hudson and Harlem lines (M1A), sisters to the Metro-North New Haven Line. In the late 1980s and early 1990s, the M2 design was licensed by the MTA and ConnDOT to two other companies to produce follow-up series.
All cars are equipped with GE 1259 DC motors with a rated output of 162 horsepower (121 kW) on all axles.
The M2 Cosmopolitan series (#'s 8400-8849) replaced EMU cars dating from the early 1920s to 1954, including the Pullman 4400-series. These were originally manufactured for, and inherited from, the New York, New Haven and Hartford Railroad. As with the cousin M1 series, the M2s accompanied an overhaul of the long-neglected main line and the New Canaan Branch in which longer, high level platforms were introduced along with other infrastructure improvements.
Aside from the technical differences of the New Haven Line (electrification via overhead catenary instead of third rail), the cars are similar to the sister M1A order and, in times of equipment shortages or severe weather, the M2s have run on the Hudson and Harlem lines. Most of the other differences are in the interior and exterior appearance of the cars, such as red striping on the exterior rather than blue, the interior wallpaper having both the New York and Connecticut state seals and the obvious pantograph and mechanical apparatus on the roof. Both the MTA and ConnDOT purchased bar cars, but complaints from riders from stations in New York, coupled with arrival of new equipment on the Hudson and Harlem lines, led to the conversion of the ten MTA-owned bar cars to standard coaches. The ten ConnDOT-owned bar cars, which ran on express trains to New Haven, Stamford, South Norwalk and New Canaan, remained in service during weekdays until May 2014.
After the LIRR and Hudson/Harlem lines received an updated version of the original Metropolitan series of cars in 1984-86 (the LIRR M3 and Metro North M3A series), plans were announced for a similar undertaking on the New Haven Line. Originally, Budd was to produce these cars but pulled out in the wake of struggles that eventually led to the company's departure from railroad car manufacturing.
After Budd stepped away from the order, the rights to the M1/M3 and M2 designs were transferred to the MTA. With these rights, MTA and ConnDOT eventually awarded the order to Tokyu Car which produced 54 M4 cars (8900-series) in 1987-1988. Nearly identical to the M2s, Tokyu Car initially gave the "Triplex" brand name to the M4 cars to highlight their being a three-car set, as opposed to the married pairs of the M2s. These cars are now commonly referred to as "triplets" by railroad personnel.
In 1994, 48 M6 series cars (9000-series) were produced by Morrison Knudsen. Nearly identical to the M4s, these cars were completed at Hornell, New York with body shells from Mafersa. The M6s also feature distinctive chimes that sound whenever the doors are closed, a feature that does not exist on the M2s or M4s. The M6s also have black framed windows, giving them the illusion of being larger than the windows on the M2s and M4s. The M6s are also commonly referred to as "triplets".
Retirement and replacement
By the start of the 21st century, the original Cosmopolitans began to reach the end of their expected service lives, as they have traveled over 1 million miles in all types of harsh weather. It was then that the cars saw some of their most intense usage as the combination of increasing ridership and financial difficulties delayed the MTA and ConnDOT's abilities to fund replacement cars.
With the replacement of Rowland by Governor M. Jodi Rell in 2004, the process for a replacement series was expedited. After an earlier deal in principle with Bombardier Transportation fell through, Kawasaki Heavy Industries was awarded a contract in July 2006 to produce the M8 series, which began to enter service in late 2010. The 405 cars are based on the M7/M7A series much as the M2s were based on the M1 series, though with some interior improvements and a different front end. On May 9th, 2014, Metro north retired the bar cars, with its last one departing Grand Central terminal at 7:07 PM. There are rumors however to bring back the bar cars by retrofitting some of the new rail cars. [note 1] An additional 25 cars are still on option. The M8 series will fully replace the M2/M4/M6 series by 2015.
|Passenger rail cars of the LIRR and Metro-North|
|4400 Series (MNCR)|
|Shoreliner I (MNCR)|
|Shoreliner II (MNCR)|
|Shoreliner III (MNCR)|
|Shoreliner IV (MNCR)|
|Comet V (MNCR)|