||An automated process has detected links on this page on the local or global blacklist.|
|Body and chassis|
|Class||Full size bus|
|Engine||OM447h (157 kW)
OM447h (177 kW)
OM447hII (184 kW)
OM447hLA (184 kW)
Voith DIWA 851.2
Voith DIWA 864.3
|Successor||Mercedes-Benz Citaro (O530)
The Mercedes-Benz O405 was a bus chassis manufactured by Mercedes-Benz from the mid-1980s to the early 2000s. It was the replacement for the Mercedes-Benz O305 chassis and was widely used in Europe, Australia and Singapore.
Standard floor version
The step-entrance version was known as the O405. An articulated version was also built known as O405G. There were two generations of O405 chassis, designated O405 MkI and O405 MkII.
The O405 MkI was marketed between mid-1980s and early 1990s. It featured a Mercedes Benz OM447h naturally aspirated engine with outputs of either 157kW (210hp) or 184kW (250hp). Optionally available was a naturally aspirated compressed natural gas engine model M447hG with 150kW (205hp) output. The gearbox coupled to the engine was usually the Mercedes-Benz W3E110/2.2R or Mercedes-Benz W3E112/2.2R (the former being able to handle the more powerful 184kW engine), although there have been other gearboxes such as the ZF 5HP 500 or Allison B300R coupled to the engine.
The O405 MkII was marketed from the early 1990s to the late 1990s and into the early 2000s in some parts of the world. It featured a Mercedes-Benz OM447hA turbocharged engine with an output of 184kW (250hp), although some examples feature either a naturally aspirated engine (OM447h-II), a turbocharged engine (OM447hA) or a turbocharged, intercooled engine (OM447hLA). The gearbox coupled to the engine was either the ZF 4HP 500 or 5HP 500, or the Voith D864.3.
From 1994, this chassis was available with the M447hG Euro II 175kW (238hp) naturally aspirated compressed natural gas engine.
The low-floor version of the O405 was known as the O405N (or O405GN for articulated version), later a further developed version was also built, it was known as the O405N²/O405N2 (or O405GN²/O405GN2 for articulated version). The O405(G)N do not have steps at the entrances and exits, but the seats are mounted on "platforms". The GN2 type addressed this problem. These buses are usually fitted with ZF transmissions, but some are fitted with Voith examples.
|This section requires expansion. (January 2011)|
Low-entry version O405 NH
The low-entry version O405NH was produced by EvoBus for the Australian market. Much of its popularity with government and private operators alike can be attributed to the popularity of the Mercedes-Benz O405 MkII chassis that it replaced.
The chassis was derived from a combination of the rear modules of an O405 MkII chassis and the front modules of an O405N²/O405N^2 chassis. Because of the difference in height between the front and rear modules of the chassis, there are one or more steps leading up from behind the centre door position to a standard O405 floorline. Because the chassis has a horizonally-mounted engine, there's no room for a rear door. This "low-entry" concept has become very popular in Europe - many integral products using this concept have been released such as the Mercedes-Benz Citaro LE.
Portugal has Camo U1001S, Camo Camus, Irmãos Mota 'Atomic UR95 and UR2000 and Marcopolo Tricana bodies.
The solitary UK O405G was bodied by Alexander.
The first ten UK examples of the integral O405N had their bodies finished by UVG.
Sydney Buses took delivery of 247 Pressed Metal Corporation bodied O405s between 1987 and October 1990. In January 1997 it received two Ansair bodied O405Ns. It also inherited four Custom Coaches bodied O405s when it purchased North & Western Bus Lines. Between October 1999 and December 2002 it received 300 Custom Coaches bodied CNG O405NHs.
Singapore Bus Services (now SBS Transit) had ordered 700 Mercedes-Benz O405 to replace retiring first batch of Mercedes-Benz OF1413s between 1990 and 1992. They were bodied by Alexander PS and Duple Metsec. All were withdrawn by 2011 with all replaced by Scania K230UB. A few O405s were shipped to Thailand and were rebodied due to the bodywork being no longer designed.
TIBS (now SMRT Buses) had bought Mercedes-Benz O405 with Hispano Carrocera and Volgren CR221 bodies, and TIBS had bought for the first time, various batch of bendy buses (Mark 1, Mark 2, Habit and Volgren) bodies. Normal rigid buses will have 2 years or 2 years 6 months extension, bendy buses will have 17 years of lifespan.
- GolAZ (Golitsynskii avtobusnyi zavod) produced model O405 (АКА-5225) and O405G (АКА-6226)
|Wikimedia Commons has media related to Mercedes-Benz O405.|
|Wikimedia Commons has media related to Mercedes-Benz O 405.|
|Wikimedia Commons has media related to Mercedes-Benz O 405 N.|
|Wikimedia Commons has media related to Mercedes-Benz O 405 NH.|