# Gal (unit)

(Redirected from Milligal)
Gravity anomalies covering the Southern Ocean are shown here in false-color relief. Amplitudes range between -30 mGal (magenta) to +30 mGal (red). This image has been normalized to remove variation due to differences in latitude

The gal, sometimes called galileo, (symbol Gal) is a unit of acceleration used extensively in the science of gravimetry.[1][2][3] The gal is defined as 1 centimeter per second squared (1 cm/s2). The milligal (mGal) and microgal (µGal) refer respectively to one thousandth and one millionth of a gal.

The gal is not part of the International System of Units (known by its French-language initials "SI"). In 1978 the CIPM decided that it was permissible to use the gal "with the SI until the CIPM considers that [its] use is no longer necessary." However, use of the gal is deprecated by ISO 80000-3:2006.

The gal is a derived unit, defined in terms of the centimeter-gram-second (CGS) base unit of length, the centimeter, and the second, which is the base unit of time in both the CGS as well as the modern SI system. In SI base units, 1 Gal is precisely equal to 0.01 m/s2.

The acceleration due to Earth’s gravity (see Standard gravity) at its surface is 976 to 983 Gal, the variation being due mainly to differences in latitude and elevation. Mountains and masses of lesser density within the Earth's crust typically cause variations in gravitational acceleration of tens to hundreds of milligals (mGal). The gravity gradient (variation with height) above Earth's surface is about 3.1 µGal per centimeter of height (3.1×10−6 s–2), resulting in a maximum difference of about 2 Gal (0.02 m/s2) from the top of Mount Everest to sea level.[5]

Unless it is being used at the beginning of a sentence or in paragraph or section titles, the unit name gal is properly spelled with a lowercase g. As with the torr and its symbol, the unit name (gal) and its symbol (Gal) are spelled identically except that the latter is capitalized.

The gal is named after Galileo Galilei, a physicist who made the first measurements of the Earth's gravity.

It can also be used to measure peak ground acceleration in earthquakes.

## Conversions

Conversions between common units of acceleration
m/s2 ft/s2 standard gravity (g0) Gal (cm/s2)
1 m/s2 1 3.28084 0.101972 100
1 ft/s2 0.304800 1 0.0310810 30.4800
g0 9.80665 32.1740 1 980.665
1 cm/s2 0.01 0.0328084 0.00101972 1