Jump to content

Modifiable areal unit problem

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by GeogSage (talk | contribs) at 18:09, 14 August 2022 (→See also: Added link to Concepts and Techniques in Modern Geography page). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

MAUP distortion example
An example of the modifiable areal unit problem and the distortion of rate calculations

The modifiable areal unit problem (MAUP) is a source of statistical bias that can significantly impact the results of statistical hypothesis tests. MAUP affects results when point-based measures of spatial phenomena are aggregated into districts, for example, population density or illness rates. The resulting summary values (e.g., totals, rates, proportions, densities) are influenced by both the shape and scale of the aggregation unit.[1]

For example, census data may be aggregated into county districts, census tracts, postcode areas, police precincts, or any other arbitrary spatial partition. Thus the results of data aggregation are dependent on the mapmaker's choice of which "modifiable areal unit" to use in their analysis. A census choropleth map calculating population density using state boundaries will yield radically different results than a map that calculates density based on county boundaries. Furthermore, census district boundaries are also subject to change over time,[2] meaning the MAUP must be considered when comparing past data to current data.

Background

The issue was first recognized by Gehlke and Biehl in 1934[3] and later described in detail in an entry in the Quantitative Teaching, Research and Outreach in Geography (CATMOG) series by Stan Openshaw (1984) and in the book by Giuseppe Arbia (1988). In particular, Openshaw (1984) observed that "the areal units (zonal objects) used in many geographical studies are arbitrary, modifiable, and subject to the whims and fancies of whoever is doing, or did, the aggregating".[4] The problem is especially apparent when the aggregate data are used for cluster analysis for spatial epidemiology, spatial statistics or choropleth mapping, in which misinterpretations can easily be made without realizing it. Many fields of science, especially human geography are prone to disregard the MAUP when drawing inferences from statistics based on aggregated data.[citation needed] MAUP is closely related to the topic of ecological fallacy and ecological bias (Arbia, 1988).

Ecological bias caused by MAUP has been documented as two separate effects that usually occur simultaneously during the analysis of aggregated data. First, the scale effect causes variation in statistical results between different levels of aggregation (radial distance). Therefore, the association between variables depends on the size of areal units for which data are reported. Generally, correlation increases as areal unit size increases. The zone effect describes variation in correlation statistics caused by the regrouping of data into different configurations at the same scale (areal shape).

Since the 1930s, research has found extra variation in statistical results because of the MAUP. The standard methods of calculating within-group and between-group variance do not account for the extra variance seen in MAUP studies as the groupings change. MAUP can be used as a methodology to calculate upper and lower limits as well as average regression parameters for multiple sets of spatial groupings. The MAUP is a critical source of error in spatial studies, whether observational or experimental. As such, unit consistency, particularly in a time-series cross-sectional (TSCS) context, is essential. Further, robustness checks of unit sensitivity to alternative spatial aggregation should be routinely performed to mitigate associated biases on resulting statistical estimates.

Suggested solutions

Several suggestions have been made in literature to reduce aggregation bias during regression analysis. A researcher might correct the variance-covariance matrix using samples from individual-level data.[5] Alternatively, one might focus on local spatial regression rather than global regression. A researcher might also attempt to design areal units to maximize a particular statistical result.[4] Others have argued that it may be difficult to construct a single set of optimal aggregation units for multiple variables, each of which may exhibit non-stationarity and spatial autocorrelation across space in different ways. Others have suggested developing statistics that change across scales in a predictable way, perhaps using fractal dimension as a scale-independent measure of spatial relationships. Others have suggested Bayesian hierarchical models as a general methodology for combining aggregated and individual-level data for ecological inference.

Studies of the MAUP based on empirical data can only provide limited insight due to an inability to control relationships between multiple spatial variables. Data simulation is necessary to have control over various properties of individual-level data. Simulation studies have demonstrated that the spatial support of variables can affect the magnitude of ecological bias caused by spatial data aggregation.[6]

MAUP sensitivity analysis

Using simulations for univariate data, Larsen advocated the use of a Variance Ratio to investigate the effect of spatial configuration, spatial association, and data aggregation.[7] A detailed description of the variation of statistics due to MAUP is presented by Reynolds, who demonstrates the importance of the spatial arrangement and spatial autocorrelation of data values.[8] Reynold’s simulation experiments were expanded by Swift, who in which a series of nine exercises began with simulated regression analysis and spatial trend, then focused on the topic of MAUP in the context of spatial epidemiology. A method of MAUP sensitivity analysis is presented that demonstrates that the MAUP is not entirely a problem.[6] MAUP can be used as an analytical tool to help understand spatial heterogeneity and spatial autocorrelation.

This topic is of particular importance because in some cases data aggregation can obscure a strong correlation between variables, making the relationship appear weak or even negative. Conversely, MAUP can cause random variables to appear as if there is a significant association where there is not. Multivariate regression parameters are more sensitive to MAUP than correlation coefficients. Until a more analytical solution to MAUP is discovered, spatial sensitivity analysis using a variety of areal units is recommended as a methodology to estimate the uncertainty of correlation and regression coefficients due to ecological bias. An example of data simulation and re-aggregation using the ArcPy library is available.[9] [10]

In transport planning, MAUP is associated to Traffic Analysis Zoning (TAZ). A major point of departure in understanding problems in transportation analysis is the recognition that spatial analysis has some limitations associated with the discretization of space. Among them, modifiable areal units and boundary problems are directly or indirectly related to transportation planning and analysis through the design of traffic analysis zones – most of transport studies require directly or indirectly the definition of TAZs. The modifiable boundary and the scale issues should all be given specific attention during the specification of a TAZ because of the effects these factors exert on statistical and mathematical properties of spatial patterns (ie the modifiable areal unit problem—MAUP). In the studies of Viegas, Martinez and Silva (2009, 2009b)[10] the authors propose a method where the results obtained from the study of spatial data are not independent of the scale, and the aggregation effects are implicit in the choice of zonal boundaries. The delineation of zonal boundaries of TAZs has a direct impact on the reality and accuracy of the results obtained from transportation forecasting models. In this paper the MAUP effects on the TAZ definition and the transportation demand models are measured and analyzed using different grids (in size and in origin location). This analysis was developed by building an application integrated in commercial GIS software and by using a case study (Lisbon Metropolitan Area) to test its implementabiity and performance. The results reveal the conflict between statistical and geographic precision, and their relationship with the loss of information in the traffic assignment step of the transportation planning models.[10]

See also

General topics

Specific applications

References

  1. ^ "MAUP | Definition – Esri Support GIS Dictionary". support.esri.com. Retrieved 2017-03-09.
  2. ^ Geography, US Census Bureau. "Geographic Boundary Change Notes". www.census.gov. Retrieved 2017-02-24.
  3. ^ Gehlke & Biehl 1934
  4. ^ a b Openshaw 1984, p. 3
  5. ^ Holt D, Steel D, Tranmer M, Wrigley N. (1996). “Aggregation and ecological effects in geographically based data.” “Geographical Analysis” 28:244{261
  6. ^ a b Swift, A., Liu, L., and Uber, J. (2008) "Reducing MAUP bias of correlation statistics between water quality and GI illness." Computers, Environment and Urban Systems 32, 134–148
  7. ^ Larsen, J. (2000). "The Modifiable Areal Unit Problem: A problem or a source of spatial information?" PhD thesis, Ohio State University.
  8. ^ Reynolds, H. (1998). "The Modifiable Area Unit Problem: Empirical Analysis By Statistical Simulation." PhD thesis, Department of Geography University of Toronto, http://www.badpets.net/Thesis
  9. ^ Swift, A. (2017). "Crime mapping data simulation", https://app.box.com/s/a84w16x7hffljjvkhtlr72eisj4qiene
  10. ^ a b c Viegas, José Manuel; Martinez, L. Miguel; Silva, Elisabete A. (January 2009). "Effects of the Modifiable Areal Unit Problem on the Delineation of Traffic Analysis Zones". Environment and Planning B: Planning and Design. 36 (4): 625–643. doi:10.1068/b34033. S2CID 54840846.

Sources

  • Arbia, Giuseppe (1988). Spatial data configuration in then statistical analysis of regional economic and related problems. Dordrecht: Kluwer Academic Publishers.
  • This article contains quotations from Modifiable areal unit problem at the GIS Wiki, which is available under the Creative Commons Attribution 3.0 Unported (CC BY 3.0) license.
  • Gehlke, C. E.; Biehl, Katherine (March 1934). "Certain effects of grouping upon the size of the correlation coefficient in census tract material". Journal of the American Statistical Association. 29 (185A): 169–170. doi:10.2307/2277827. JSTOR 2277827.
  • Openshaw, Stan (1984). The modifiable areal unit problem. Norwick: Geo Books. ISBN 0860941345. OCLC 12052482.
  • Unwin, D. J. (1996). "GIS, spatial analysis and spatial statistics." Progress in Human Geography. 20: 540–551.
  • Cressie, N. (1996). “Change of Support and the Modifiable Areal Unit Problem.” “Geographical Systems“, 3:159–180.
  • Viegas, J., E.A. Silva, L. Martinez (2009a). “Effects of the Modifiable Areal Unit Problem on the Delineation of Traffic Analysis Zones” “Environment and Planning B – Planning and Design“, 36(4): 625–643.
  • Viegas, J., E.A. Silva, L. Martinez (2009a). “A traffic analysis zone definition: a new methodology and algorithm” “Transportation“. 36 (5): 6“, 36 (5): 6 .

Further reading

Retrieved from "https://en.wikipedia.org/w/index.php?title=Modifiable_areal_unit_problem&oldid=1104397284"