New Zealand one-dollar coin
|Value||1.00 New Zealand dollars|
|Composition||Copper-Aluminium-Nickel (Cu 92%, Al 6%, Ni 2%)|
|Years of minting||1990 - present|
|Design||Elizabeth II, Queen of New Zealand|
|Design||A kiwi surrounded by silver fern fronds|
|Designer||Robert Maurice Conly|
The New Zealand one-dollar coin ($1) is a coin of the New Zealand dollar. The current circulating coin was introduced on 11 February 1991 to replace the existing $1 note. There had previously been occasional issues of commemorative "silver dollars", but they are rarely seen in circulation.
Current circulating coin (1991 - present)
The current coin replaced the New Zealand one dollar note in use since New Zealand's currency was decimalised on 10 July 1967. The reason for replacing the note was due to inflation making the note more expensive to produce, and notes had to be replaced regularly due to wear and tear. The $1 coins, and $2 coins, were first minted in 1990 but circulated in 1991. The $1 notes were withdrawn later that year.
The new $1 coin was made of aluminium bronze, and was 23.0 mm in diameter, 2.74 mm thick, and 8.0 g in weight. The edge of the coin consisted of eight sections, alternating between milling and plain sections. The reverse of the coin was designed by Robert Maurice Conly, and depicted two symbols of New Zealand: a kiwi facing left in the centre, surrounded by four fronds of the silver fern (Cyathea dealbata). Both the kiwi and the silver ferns sat above the legend reading the denomination "ONE DOLLAR". The obverse consisted of Raphael Maklouf's portrait of Queen Elizabeth II, the Queen of New Zealand, with the legend reading "ELIZABETH II NEW ZEALAND [year of minting]".
In 1999, the obverse of all new $1 coins was changed with the addition of Ian Rank-Broadley's portrait of Queen Elizabeth II, and the legend was rearranged to read "NEW ZEALAND ELIZABETH II [year of minting]".
In 2006 the Reserve Bank of New Zealand replaced the 10c, 20c and 50c coins in circulation with smaller, lighter ones, and removed the 5c coin from circulation. The $1 remained the same as it was relatively new (the oldest $1 coins were only 14 years old), they circulated well, and the extra expense of adapting machines that only took $1 coins. Another reason for the change in size was that the 10c and $1 coin were very similar in size. Being only 0.62 mm different in diameter, and two 10c together were only 0.66 mm different from the $1 in thickness, it was possible with some parking meters to insert two 10c coins side-by-side and get $1 worth of parking time (naturally, this could also backfire and jam the meter.).