Non-stoichiometric compounds are chemical compounds with an elemental composition that cannot be represented by usual integral numbers. They are almost always inorganic compounds and almost invariably solids. In such materials some small percentage of atoms are missing or too many atoms are packed into an otherwise perfect lattice work. They exhibit special electrical or chemical properties because of these flaws or defects. For example, when atoms are missing, the other atoms can move through the solid more rapidly. Non-stoichiometry is represented by many metal oxides and sulfides: stoichiometric iron(II) oxide, which is rare, has the formula FeO, whereas the more common nonstoichiometric material has the formula Fe0.84O. Batteries often rely on materials that can exist in a range of non-stoichiometric states.
Since solids are overall electrically neutral, the defect in an ionic compound is compensated by a change in the charge of other atoms in the solid, either by changing their oxidation state, or by replacing them with atoms of different elements with a different charge.
Nonstoichiometry is pervasive for transition metal oxides, especially when the metal is not in its highest oxidation state. For example, although wüstite (ferrous oxide) has an ideal (stoichiometric) formula FeO, the actual stoichiometry is closer to Fe0.95O. The non-stoichiometry occurs because of the ease of oxidation of Fe2+ to Fe3+ effectively replacing a small portion of Fe2+ with two thirds their number of Fe3+. Thus for every three "missing" Fe2+ ions, the crystal contains two Fe3+ ions to balance the charge. The composition of a non-stoichiometric compound usually varies in a continuous manner over a narrow range. Thus, the formula for wüstite is written as Fe1-xO, where x is a small number (0.05 in the previous example) representing the deviation from the "ideal" formula. Nonstoichiometry is especially important in solid, three-dimensional polymers that can tolerate mistakes. To some extent, entropy drives all solids to be non-stoichiometric. But for practical purposes, the term describes materials where the non-stoichiometry is measurable, usually at least 1% of the ideal composition.
Non-stoichiometric compounds are also known as berthollides (as opposed to the stoichiometric compounds or daltonides). They violate the law of definite proportions. The names come from Claude Louis Berthollet and John Dalton, respectively, who in the 19th century advocated rival theories of the composition of substances. Although Dalton "won" for the most part, it was later recognized that the law of definite proportions did have important exceptions.
However, transition metal oxides are not the only examples of deviations from stoichiometry. It is expected to be a general feature of crystalline compounds. Some examples are provided by eighty binary systems which form a single, essentially ordered, crystalline compound near fifty atomic percent in which the deviation from stoichiometry(a strict 50 at% composition)are important, clearly evident, but, with the exception of SnTe(c), are well below one atomic percent. The temperature-atom fraction phase diagrams of these systems show what appears to be a line compound at 50 at% with the normal resolution used on the composition axis. These are N:(8-N) compounds such as I-VIIs(e.g. NaCl, KCl,etc.), the II-VIs(CdSe,CdTe), IIB-VIs(PbS,PbSe,PbTe), and III-Vs(GaAs,InAs,GaSb). At high temperatures, but below the compound melting point the AB(c) compound is in equilibrium with either an A-rich or B-rich liquid and a gas phase. In either case, at equilibrium the chemical potential of A must be the same in all three phases and similarly for element B. The difference in the chemical potential of say element B for the liquid phase in equilibrium with AB(c)at a given temperature would not appear to be remarkable because of the significant difference in composition of the liquids. It appears striking for AB(c) because of the narrow homogeneity range of AB(c). The partial pressures of diatomic selenium and of tellurium have been determined for a number of selenides and tellurides by measuring the UV-VIS absorption of the gas phase. The arsenic pressure over a number of arsenides has been measured also. The results are usually shown on a log pressure-reciprocal temperature plot and show a parabola-like three phase curve ending at the melting point on the high temperature side. Along this curve AB(c), liquid, and gas phase coexist. Sufficiently below the AB(c) melting point this loop is typically a few decades wide in pressure. Many of the compounds from the II-VI, IIB-VI, and II-V compounds are semiconductors whose electrical properties are significantly affected by the deviations from stoichiometry. The A-saturated compound is usually n-type indicating an excess of element A through the incorporation of vacant sites in the B sublattice or A atoms in interstitial sites acting as donors in the electronic energy band structure. Similarly the B saturated AB(c) is B rich and p-type through the incorporation of vacant sites in the A sublattice or B atoms in interstitial sites acting as acceptors. Control of the electrical properties requires not only control of the concentration of foreign atoms but also control of the deviation from stoichiometry through equilibration with vapor phase.
Defects vs non-stoichiometry
The cuprate superconductors highlight the concept of "defect" structures, which is related to non-stoichiometry. YBa2Cu3O7−x can be viewed as a variant of the perovskite family of materials, which have idealized stoichiometry ABO3. For the cuprates, Y + Ba occupy "A sites" whereas Cu occupies the "B sites". The non-defect material would have the stoichiometry YBa2Cu3O9. Using this way of describing a structure, W40O118 is said to be a defect variant of WO3.
Many non-stoichiometric compounds are important in solid state chemistry, and have applications in ceramics and as superconductors. For example, yttrium barium copper oxide, arguably the most notable high-temperature superconductor, is a non-stoichiometric solid with a formula represented by YxBa2Cu3O7−x. The critical temperature of the superconductor depends on the exact value of x. The stoichiometric species has x = 0, but this value can be as great as 1.
It is sometimes difficult to determine if a material is non-stoichiometric or if the formula is best represented by large numbers. The oxides of tungsten illustrate this situation. Starting from the idealized material tungsten trioxide, one can generate a series of related materials that are slightly deficient in oxygen. These oxygen-deficient species can be described as WO3-x but in fact they are stoichiometric species with large unit cells with the formulas WnO(3n-2) where n = 20, 24, 25, 40. Thus, the last species can be described with the stoichiometric formula W40O118, whereas the non-stoichiometric description WO2.95 implies a more random distribution of oxide vacancies.
The monosulfides of the transition metals are often nonstoichiometric. Best known perhaps is iron(II) sulfide (the mineral pyrrhotite) with a composition Fe(1-x)S (x = 0 to 0.2). The rare stoichiometric FeS endmember is known as the mineral troilite. Pyrrhotite is remarkable in that it has numerous polytypes, i.e. crystalline forms differing in symmetry (monoclinic or hexagonal) and composition (Fe7S8, Fe9S10, Fe11S12 and others). These materials are always iron-deficient owing to the presence of lattice defects, namely iron vacancies. Despite those defects, the composition is usually expressed as a ratio of large numbers and the crystals symmetry is relatively high. This means the iron vacancies are not randomly scattered over the crystal, but form certain regular configurations. Those vacancies strongly affect the magnetic properties of pyrrhotite: the magnetism increases with the concentration of vacancies and is absent for the stoichiometric FeS.
- Palladium hydride is a nonstoichiometric material of the approximate composition PdHx (0.02 < x < 0.58). This solid conducts hydrogen by virtue of the mobility of the hydrogen atoms within the solid.
- The coordination polymer Prussian blue, nominally Fe7(CN)18, is well known to form non-stoichiometrically. In fact the non-stoichiometric phases exhibit more useful properties associated with the ability of the solid to absorb caesium and thallium ions.
Many useful chemicals are produced by the reactions of hydrocarbons with oxygen, a conversion that is catalyzed by metal oxides. The process operates via the transfer of "lattice" oxygen to the hydrocarbon substrate, a step that temporarily generates a vacancy. In a subsequent step, the oxygen vacancy is replenished by the O2. Such catalysts rely on the ability of the metal oxide to form phases that are not stoichiometric. An analogous sequence of events describes other kinds of atom-transfer reactions including hydrogenation and hydrodesulfurization catalysed by solid catalysts. These considerations also highlight the fact that stoichiometry is determined by the interior of crystals: the surfaces of crystals often do not follow the stoichiometry of the bulk. The complex structures on surfaces are described by the term "surface reconstruction."
The migration of atoms within a solid is strongly influenced by the defects associated with non-stoichiometry. These defect sites provide pathways for atoms and ions to migrate through the otherwise dense ensemble of atoms that form the crystals. Oxygen sensors and solid state batteries are two applications that rely on oxide vacancies.
Non-stoichiometry vs. inhomogeneity
Non-stoichiometry, which is change in the composition at the atomic scale, should be distinguished from macroscopic sample inhomogeneity and associated measurement artifacts. The chemical composition of materials is often measured using high-energy particles (electrons, ions, X-rays, etc.) as the probes. Those particles have different penetration depths into the studied material and often have limited accuracy (~10 %). When applied to a chemically reactive material, they can falsely evaluate it as non-stoichiometric. Let us consider a metal, such as aluminium. In air, it is covered by nanometer-thick natural oxide Al2O3. Surface sensitive techniques will detect stoichiometric Al2O3. Techniques probing beyond the oxide would detect a non-stoichiometric oxide, and the bulk analysis methods would yield (almost) pure aluminum. Because of such measurement problems, the composition of most thin films is measured as non-stoichiometric.
- J. Gopalakrishnan, Chintamani Nagesa Ramachandra Rao (1997). New Directions in Solid State Chemistry. Cambridge University Press. p. 230.
- Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 0080379419.. pp. 642-644
- Lesley E. Smart (2005). Solid State Chemistry: An Introduction, 3rd edition. CRC Press. p. 214. ISBN 0-7487-7516-1.
- Henry Marshall Leicester (1971). The Historical Background of Chemistry. Courier Dover Publications. p. 153.
- Shriver, D. F.; Atkins, P. W.; Overton, T. L.; Rourke, J. P.; Weller, M. T.; Armstrong, F. A. (2006). Inorganic Chemistry. New York: W. H. Freeman. ISBN 0-7167-4878-9.
- Hubert Lloyd Barnes (1997). Geochemistry of hydrothermal ore deposits. John Wiley and Sons. pp. 382–390. ISBN 0-471-57144-X.