|This article needs additional citations for verification. (February 2010)|
In physics, a phonon is a collective excitation in a periodic, elastic arrangement of atoms or molecules in condensed matter, like solids and some liquids. Often designated a quasiparticle, it represents an excited state in the quantum mechanical quantization of the modes of vibrations of elastic structures of interacting particles.
Phonons play a major role in many of the physical properties of condensed matter, like thermal conductivity and electrical conductivity. The study of phonons is an important part of condensed matter physics.
The concept of phonons was introduced in 1932 by Russian physicist Igor Tamm. The name phonon comes from the Greek word φωνή (phonē), which translates to sound or voice because long-wavelength phonons give rise to sound. Shorter-wavelength higher-frequency phonons give rise to heat.
- 1 Definition
- 2 Lattice dynamics
- 3 Acoustic and optical phonons
- 4 Crystal momentum
- 5 Thermodynamics
- 6 Operator formalism
- 7 Nonlinearity
- 8 Phononic computing
- 9 See also
- 10 References
- 11 External links
A phonon is a quantum mechanical description of an elementary vibrational motion in which a lattice of atoms or molecules uniformly oscillates at a single frequency. In classical mechanics this is designated a normal mode. Normal modes are important because any arbitrary lattice vibration can be considered to be a superposition of these elementary vibrations (cf. Fourier analysis). While normal modes are wave-like phenomena in classical mechanics, phonons have particle-like properties too, in a way related to the wave–particle duality of quantum mechanics.
For example, a rigid regular, crystalline, i.e. not amorphous, lattice is composed of N particles. These particles may be atoms, but they may be molecules as well. N is a large number, say ~1023, and on the order of Avogadro's number, for a typical sample of solid. If the lattice is rigid, the atoms must be exerting forces on one another to keep each atom near its equilibrium position. These forces may be Van der Waals forces, covalent bonds, electrostatic attractions, and others, all of which are ultimately due to the electric force. Magnetic and gravitational forces are generally negligible. The forces between each pair of atoms may be characterized by a potential energy function that depends on the distance of separation of the atoms. The potential energy of the entire lattice is the sum of all pairwise potential energies:
It is difficult to solve this many-body problem in full generality, in either classical or quantum mechanics. In order to simplify the task, two important approximations are usually imposed. First, the sum is only performed over neighboring atoms. Although the electric forces in real solids extend to infinity, this approximation is nevertheless valid because the fields produced by distant atoms are effectively screened. Secondly, the potentials are treated as harmonic potentials. This is permissible as long as the atoms remain close to their equilibrium positions. Formally, this is accomplished by Taylor expanding about its equilibrium value to quadratic order, giving proportional to the displacement and the elastic force simply proportional to . The error in ignoring higher order terms remains small if remains close to the equilibrium position.
The resulting lattice may be visualized as a system of balls connected by springs. The following figure shows a cubic lattice, which is a good model for many types of crystalline solid. Other lattices include a linear chain, which is a very simple lattice which we will shortly use for modeling phonons. Other common lattices may be found under "crystal structure".
The potential energy of the lattice may now be written as
Here, is the natural frequency of the harmonic potentials, which are assumed to be the same since the lattice is regular. is the position coordinate of the th atom, which we now measure from its equilibrium position. The sum over nearest neighbors is denoted as (nn).
Due to the connections between atoms, the displacement of one or more atoms from their equilibrium positions give rise to a set of vibration waves propagating through the lattice. One such wave is shown in the figure to the right. The amplitude of the wave is given by the displacements of the atoms from their equilibrium positions. The wavelength is marked.
There is a minimum possible wavelength, given by twice the equilibrium separation a between atoms. Any wavelength shorter than this can be mapped onto a wavelength longer than 2a, due to the periodicity of the lattice.
In order to simplify the analysis needed for a 3-dimensional lattice of atoms it is convenient to model a 1-dimensional lattice or linear chain. This model is complex enough to display the salient features of phonons.
The forces between the atoms are assumed to be linear and nearest-neighbour, and they are represented by an elastic spring. Each atom is assumed to be a point particle and the nucleus and electrons move in step (adiabatic approximation).
- n−1 n n+1 ← d →
- →→ → →→→
Where labels the -th atom, is the distance between atoms when the chain is in equilibrium and the displacement of the -th atom from its equilibrium position.
If is the elastic constant of the spring and the mass of the atom then the equation of motion of the -th atom is :
This is a set of coupled equations and since the solutions are expected to be oscillatory, new coordinates can be defined by a discrete Fourier transform, in order to de-couple them.
Here replaces the usual continuous variable . The are known as the normal coordinates. Substitution into the equation of motion produces the following decoupled equations.(This requires a significant manipulation using the orthonormality and completeness relations of the discrete fourier transform )
These are the equations for harmonic oscillators which have the solution:
Each normal coordinate represents an independent vibrational mode of the lattice with wavenumber which is known as a normal mode. The second equation for is known as the dispersion relation between the angular frequency and the wavenumber.
A one-dimensional quantum mechanical harmonic chain consists of N identical atoms. This is the simplest quantum mechanical model of a lattice that allows phonons to arise from it. The formalism for this model is readily generalizable to two and three dimensions.
As in the previous section, the positions of the masses are denoted by , as measured from their equilibrium positions (i.e. if particle is at its equilibrium position.) In two or more dimensions, the are vector quantities. The Hamiltonian for this system is
where is the mass of each atom (assuming is equal for all), and and are the position and momentum operators for the th atom and the sum is made over the nearest neighbors (nn). However one expects that in a lattice there could also appear waves that behave like particles. It is customary to deal with waves in fourier space which uses normal modes of the wavevector as variables instead coordinates of particles. The number of normal modes is same as the number of particles. However, the fourier space is very useful given the periodicity of the system.
A set of "normal coordinates" may be introduced, defined as the discrete Fourier transforms of the 's and "conjugate momenta" defined as the Fourier transforms of the 's:
This choice retains the desired commutation relations in either real space or wave vector space
From the general result
The potential energy term is
The Hamiltonian may be written in wave vector space as
The couplings between the position variables have been transformed away; if the 's and 's were hermitian (which they are not), the transformed Hamiltonian would describe uncoupled harmonic oscillators.
The form of the quantization depends on the choice of boundary conditions; for simplicity, periodic boundary conditions are imposed, defining the th atom as equivalent to the first atom. Physically, this corresponds to joining the chain at its ends. The resulting quantization is
The upper bound to comes from the minimum wavelength, which is twice the lattice spacing , as discussed above.
The harmonic oscillator eigenvalues or energy levels for the mode are :
The levels are evenly spaced at:
An exact amount of energy must be supplied to the harmonic oscillator lattice to push it to the next energy level. In comparison to the photon case when the electromagnetic field is quantized, the quantum of vibrational energy is called a phonon.
All quantum systems show wave-like and particle-like properties simultaneously. The particle-like properties of the phonon are best understood using the methods of second quantization and operator techniques described later.
This may be generalized to a three-dimensional lattice. The wave number k is replaced by a three-dimensional wave vector k. Furthermore, each k is now associated with three normal coordinates.
The new indices s = 1, 2, 3 label the polarization of the phonons. In the one-dimensional model, the atoms were restricted to moving along the line, so the phonons corresponded to longitudinal waves. In three dimensions, vibration is not restricted to the direction of propagation, and can also occur in the perpendicular planes, like transverse waves. This gives rise to the additional normal coordinates, which, as the form of the Hamiltonian indicates, we may view as independent species of phonons.
For a one-dimensional alternating array of two types of ion or atom of mass m1, m2 repeated periodically at a distance a, connected by springs of spring constant K, two modes of vibration result:
where k is the wave-vector of the vibration related to its wavelength by k=2π/λ. The connection between frequency and wave-vector, ω=ω(k), is known as a dispersion relation. The plus sign results in the so-called optical mode, and the minus sign to the acoustic mode. In the optical mode two adjacent different atoms move against each other, while in the acoustic mode they move together.
The speed of propagation of an acoustic phonon, which is also the speed of sound in the lattice, is given by the slope of the acoustic dispersion relation, (see group velocity.) At low values of (i.e. long wavelengths), the dispersion relation is almost linear, and the speed of sound is approximately , independent of the phonon frequency. As a result, packets of phonons with different (but long) wavelengths can propagate for large distances across the lattice without breaking apart. This is the reason that sound propagates through solids without significant distortion. This behavior fails at large values of , i.e. short wavelengths, due to the microscopic details of the lattice.
For a crystal that has at least two atoms in its primitive cell (which may or may not be different), the dispersion relations exhibit two types of phonons, namely, optical and acoustic modes corresponding to the upper blue and lower red of curve in the diagram, respectively. The vertical axis is the energy or frequency of phonon, while the horizontal axis is the wave-vector. The boundaries at -π/a and π/a are those of the first Brillouin zone. It is also interesting that for a crystal with N ( > 2) different atoms in a primitive cell, there are always three acoustic modes: one longitudinal acoustic mode and two transverse acoustic modes. The number of optical modes is 3N – 3. The lower figure shows the dispersion relations for several phonon modes in GaAs as a function of wavevector k in the principal directions of its Brillouin zone.
Many phonon dispersion curves have been measured by neutron scattering.
The physics of sound in fluids differs from the physics of sound in solids, although both are density waves: sound waves in fluids only have longitudinal components, whereas sound waves in solids have longitudinal and transverse components. This is because fluids can't support shear stresses (but see viscoelastic fluids, which only apply to high frequencies, though).
Interpretation of phonons using second quantization techniques
The energy spectrum of this Hamiltonian is easily obtained by the method of ladder operators, similar to the quantum harmonic oscillator problem. We introduce a set of ladder operators defined by:
By direct insertion on the Hamiltonian, it is readily verified that
As with the quantum harmonic oscillator, one can show that and respectively create and destroy one excitation of energy . These excitations are phonons.
Two important properties of phonons may be deduced. Firstly, phonons are bosons, since any number of identical excitations can be created by repeated application of the creation operator . Secondly, each phonon is a "collective mode" caused by the motion of every atom in the lattice. This may be seen from the fact that the ladder operators contain sums over the position and momentum operators of every atom.
It is not a priori obvious that these excitations generated by the operators are literally waves of lattice displacement, but one may convince oneself of this by calculating the position-position correlation function. Let denote a state with a single quantum of mode excited, i.e.
One can show that, for any two atoms and ,
In three dimensions the Hamiltonian has the form
Acoustic and optical phonons
Solids with more than one atom in the smallest unit cell, exhibit two types of phonons: acoustic phonons and optical phonons.
Acoustic phonons are coherent movements of atoms of the lattice out of their equilibrium positions. If the displacement is in the direction of propagation, then in some areas the atoms will be closer, in others farther apart, as in a sound wave in air (hence the name acoustic). Displacement perpendicular to the propagation direction is comparable to waves in water. If the wavelength of acoustic phonons goes to infinity, this corresponds to a simple displacement of the whole crystal, and this costs zero energy. Acoustic phonons exhibit a linear relationship between frequency and phonon wavevector for long wavelengths. The frequencies of acoustic phonons tend to zero with longer wavelength. Longitudinal and transverse acoustic phonons are often abbreviated as LA and TA phonons, respectively.
Optical phonons are out-of-phase movement of the atoms in the lattice, one atom moving to the left, and its neighbour to the right. This occurs if the lattice is made of atoms of different charge or mass. They are called optical because in ionic crystals, like sodium chloride, they are excited by infrared radiation. The electric field of the light will move every positive sodium ion in the direction of the field, and every negative chloride ion in the other direction, sending the crystal vibrating. Optical phonons have a non-zero frequency at the Brillouin zone center and show no dispersion near that long wavelength limit. This is because they correspond to a mode of vibration where positive and negative ions at adjacent lattice sites swing against each other, creating a time-varying electrical dipole moment. Optical phonons that interact in this way with light are called infrared active. Optical phonons that are Raman active can also interact indirectly with light, through Raman scattering. Optical phonons are often abbreviated as LO and TO phonons, for the longitudinal and transverse modes respectively.
When measuring optical phonon energy by experiment, optical phonon frequencies, , are often given in units of cm−1, which are the same units as the wavevector. This value corresponds to the inverse of the wavelength of a photon with the same energy as the measured phonon. The cm−1 is a unit of energy used frequently in the dispersion relations of both acoustic and optical phonons, see units of energy for more details and uses.
By analogy to photons and matter waves, phonons have been treated with wave vector as though it has a momentum , however, this is not strictly correct, because is not actually a physical momentum; it is called the crystal momentum or pseudomomentum. This is because is only determined up to addition of constant vectors (the reciprocal lattice vectors and integer multiples thereof). For example, in the one-dimensional model, the normal coordinates and are defined so that
for any integer . A phonon with wave number is thus equivalent to an infinite "family" of phonons with wave numbers , , and so forth. Physically, the reciprocal lattice vectors act as additional "chunks" of momentum which the lattice can impart to the phonon. Bloch electrons obey a similar set of restrictions.
It is usually convenient to consider phonon wave vectors which have the smallest magnitude in their "family". The set of all such wave vectors defines the first Brillouin zone. Additional Brillouin zones may be defined as copies of the first zone, shifted by some reciprocal lattice vector.
The thermodynamic properties of a solid are directly related to its phonon structure. The entire set of all possible phonons that are described by the above phonon dispersion relations combine in what is known as the phonon density of states which determines the heat capacity of a crystal.
At absolute zero temperature, a crystal lattice lies in its ground state, and contains no phonons. A lattice at a non-zero temperature has an energy that is not constant, but fluctuates randomly about some mean value. These energy fluctuations are caused by random lattice vibrations, which can be viewed as a gas of phonons. (The random motion of the atoms in the lattice is what we usually think of as heat.) Because these phonons are generated by the temperature of the lattice, they are sometimes designated thermal phonons.
Unlike the atoms which make up an ordinary gas, thermal phonons can be created and destroyed by random energy fluctuations. In the language of statistical mechanics this means that the chemical potential for adding a phonon is zero. This behavior is an extension of the harmonic potential, mentioned earlier, into the anharmonic regime. The behavior of thermal phonons is similar to the photon gas produced by an electromagnetic cavity, wherein photons may be emitted or absorbed by the cavity walls. This similarity is not coincidental, for it turns out that the electromagnetic field behaves like a set of harmonic oscillators; see Black-body radiation. Both gases obey the Bose–Einstein statistics: in thermal equilibrium and within the harmonic regime, the probability of finding phonons (or photons) in a given state with a given angular frequency is:
where is the frequency of the phonons (or photons) in the state, is Boltzmann's constant, and is the temperature.
The phonon Hamiltonian is given by
In terms of the operators, these are given by
Here, in expressing the Hamiltonian in operator formalism, we have not taken into account the term, since if we take an infinite lattice or, for that matter a continuum, the terms will add up giving an infinity. Hence, it is "renormalized" by putting the factor of to 0 arguing that the difference in energy is what we measure and not the absolute value of it. Hence, the factor is absent in the operator formalised expression for the Hamiltonian.
The ground state also called the "vacuum state" is the state composed of no phonons. Hence, the energy of the ground state is 0. When, a system is in state , we say there are phonons of type . The are called the occupation number of the phonons. Energy of a single phonon of type being , the total energy of a general phonon system is given by . In other words, the phonons are non-interacting. The action of creation and annihilation operators are given by
i.e. creates a phonon of type while annihilates. Hence, they are respectively the creation and annihilation operator for phonons. Analogous to the Quantum harmonic oscillator case, we can define particle number operator as . The number operator commutes with a string of products of the creation and annihilation operators if, the number of 's are equal to number of 's.
Phonons are bosons since, i.e. they are symmetric under exchange.
||This section provides insufficient context for those unfamiliar with the subject. (February 2015)|
- F. Schwabel, Advanced Quantum Mechanics, 4th Ed., Springer (2008), p. 253
- Krauth, Werner (April 2006). Statistical mechanics: algorithms and computations. International publishing locations: Oxford University Press. pp. 231–232. ISBN 978-0-19-851536-4.
- Mattuck R. A guide to Feynman Diagrams in the many-body problem
- Greiner & Reinhardt. Field Quantisation
- Donovan B. & Angress J.; Lattice Vibrations
- Mahan, GD (1981). many particle physics. New York: springer. ISBN 0306463385.
- Peter Y. Yu, Manuel Cardona (2010). "Fig. 3.2: Phonon dispersion curves in GaAs along high-symmetry axes". Fundamentals of Semiconductors: Physics and Materials Properties (4th ed.). Springer. p. 111. ISBN 3-642-00709-0.
- For a discussion see Prasanta Kumar Misra (2010). "§2.1.3 Normal modes of a one-dimensional chain with a basis". Physics of Condensed Matter. Academic Press. pp. 44 ff. ISBN 0-12-384954-3.
- Mahan, Gerald (2010). Condensed Matter in a Nutshell. Princeton: Princeton University Press. ISBN 0-691-14016-2.
- Feynman, Richard P. (1982). Statistical Mechanics, A Set of Lectures. Reading, Massachusetts: The Benjamin/Cummings Publishing Company, Inc. p. 159. ISBN 0-8053-2508-5.
- Phonon-phonon interactions due to non-linear effects in a linear ion trap
- Reiter, D E et al. (2009). "Generation of squeezed phonon states by optical excitation of a quantum dot" (PDF). Institute of Physics. Retrieved February 28, 2014.
- "How To Build A Phononic Computer". www.technologyreview.com (MIT). August 13, 2012. Retrieved 23 June 2014.
- "Thermal Memory: A Storage of Phononic Information."
- "'Phononic Computer' Could Process Information with Heat."
- Explained: Phonons, MIT News, 2010.
- Optical and acoustic modes
- Phonons in a One Dimensional Microfluidic Crystal  and  with movies in .