Grid method multiplication

From Wikipedia, the free encyclopedia
  (Redirected from Partial products algorithm)
Jump to: navigation, search

In mathematics education at the level of primary school or elementary school, the grid method (also known as the box method) of multiplication is an introductory approach to multi-digit multiplication calculations, i.e. multiplications involving numbers larger than ten.

Compared to traditional long multiplication, the grid method differs in clearly breaking the multiplication and addition into two steps, and in being less dependent on place value.

Whilst less efficient than the traditional method, grid multiplication is considered[by whom?] to be more reliable, in that children are less likely to make mistakes. Most pupils will go on to learn the traditional method, once they are comfortable with the grid method; but knowledge of the grid method remains a useful "fall back", in the event of confusion[citation needed]. It is also argued[by whom?] that since anyone doing a lot of multiplication would nowadays use a pocket calculator, efficiency for its own sake is less important; equally, since this means that most children will use the multiplication algorithm less often, it is useful for them to become familiar with a more explicit (and hence more memorable) method.

Use of the grid method has been standard in mathematics education in primary schools in England and Wales since the introduction of a National Numeracy Strategy with its "numeracy hour" in the 1990s. It can also be found included in various curricula elsewhere. Essentially the same calculation approach, but not necessarily with the explicit grid arrangement, is also known as the partial products algorithm or partial products method.

Calculations[edit]

Introductory motivation[edit]

The grid method can be introduced by thinking about how to add up the number of points in a regular array, for example the number of squares of chocolate in a chocolate bar. As the size of the calculation becomes larger, it becomes easier to start counting in tens; and to represent the calculation as a box which can be sub-divided, rather than drawing lots and lots of dots.[1][2]

At the simplest level, pupils might be asked to apply the method to a calculation like 3 × 17. Breaking up ("partitioning") the 17 as (10 + 7), this unfamiliar multiplication can be worked out as the sum of two simple multiplications:

  10 7
3 30 21

so 3 × 17 = 30 + 21 = 51.

This is the "grid" or "boxes" structure which gives the multiplication method its name.

Faced with a slightly larger multiplication, such as 34 × 13, pupils may initially be encouraged to also break this into tens. So, expanding 34 as 10 + 10 + 10 + 4 and 13 as 10 + 3, the product 34 × 13 might be represented:

  10 10 10 4
10 100 100 100 40
3 30 30 30 12

Totalling the contents of each row, it is apparent that the final result of the calculation is (100 + 100 + 100 + 40) + (30 + 30 + 30 + 12) = 340 + 102 = 442.

Standard blocks[edit]

Once pupils have become comfortable with the idea of splitting the whole product into contributions from separate boxes, it is a natural step to group the tens together, so that the calculation 34 × 13 becomes

  30 4
10 300 40
3 90 12

giving the addition

  300
   40
   90
 + 12
 ----
  442

so 34 × 13 = 442.

This is the most usual form for a grid calculation. In countries such as the U.K. where teaching of the grid method is usual, pupils may spend a considerable period of time regularly setting out calculations like the above, until the method is entirely comfortable and familiar.

Larger numbers[edit]

The grid method extends straightforwardly to calculations involving larger numbers.

For example, to calculate 345 × 28, the student could construct the grid with six easy multiplications

  300 40 5
20 6000 800 100
8 2400 320 40

to find the answer 6900 + 2760 = 9660.

However, by this stage (at least in standard current U.K. teaching practice) pupils may be starting to be encouraged to set out such a calculation using the traditional long multiplication form without having to draw up a grid.

Traditional long multiplication can be related to a grid multiplication in which only one of the numbers is broken into tens and units parts to be multiplied separately:

 345
20 6900
8 2760

The traditional method is ultimately faster and much more compact; but it requires two significantly more difficult multiplications which pupils may at first struggle with[citation needed]. Compared to the grid method, traditional long multiplication may also be more abstract[citation needed]and less manifestly clear[citation needed], so some pupils find it harder to remember what is to be done at each stage and why[citation needed]. Pupils may therefore be encouraged for quite a period to use the simpler grid method alongside the more efficient traditional long multiplication method, as a check and a fall-back.

Other applications[edit]

Fractions[edit]

While not normally taught as a standard method for multiplying fractions, the grid method can readily be applied to simple cases where it is easier to find a product by breaking it down.

For example, the calculation 2½ × 1½ can be set out using the grid method

  2 ½
1 2 ½
½ 1 ¼

to find that the resulting product is 2 + ½ + 1 + ¼ = 3¾

Algebra[edit]

The grid method can also be used to illustrate the multiplying out of a product of binomials, such as (a + 3)(b + 2), a standard topic in elementary algebra (although one not usually met until secondary school):

  a 3
b ab 3b
2 2a 6

Thus (a + 3)(b + 2) = ab + 3b + 2a + 6.

Mathematics[edit]

Mathematically, the ability to break up a multiplication in this way is known as the distributive law, which can be expressed in algebra as the property that a(b+c) = ab + ac. The grid method uses the distributive property twice to expand the product, once for the horizontal factor, and once for the vertical factor.

Historically the grid calculation (tweaked slightly) was the basis of a method called lattice multiplication, which was the standard method of multiple-digit multiplication developed in medieval Arabic and Hindu mathematics. Lattice multiplication was introduced into Europe by Fibonacci at the start of the thirteenth century along with the so-called Arabic numerals themselves; although, like the numerals also, the ways he suggested to calculate with them were initially slow to catch on. Napier's bones were a calculating help introduced by the Scot John Napier in 1617 to assist lattice method calculations.

See also[edit]

References[edit]

External links[edit]