Laminate flooring (also called floating wood tile in the United States) is a multi-layer synthetic flooring product fused together with a lamination process. Laminate flooring simulates wood (or sometimes stone) with a photographic applique layer under a clear protective layer. The inner core layer is usually composed of melamine resin and fiber board materials. There is a European Standard No. EN 13329:2000 specifying laminate floor covering requirements and testing methods.
Laminate flooring has grown significantly in popularity, perhaps because it may be easier to install and maintain than more traditional surfaces such as hardwood flooring. It may also have the advantages of costing less and requiring less skill to install than alternative flooring materials. It is reasonably durable, hygienic (several brands contain an antimicrobial resin), and relatively easy to maintain.
Laminate floors are reasonably easy for a DIY homeowner to install. Laminate flooring is packaged as a number of tongue and groove planks - these can be clicked into one another. Sometimes a glue backing is provided for ease of installation. Installed laminate floors typically "float" over the sub-floor on top of a foam/film underlayment, which provides moisture- and sound-reducing properties. A small (1–10 millimetres (0.039–0.394 in)) gap is required between the flooring and any immovable object such as walls, this allows the flooring to expand without being obstructed. Baseboards (skirting boards) can be removed and then reinstalled after laying of the flooring is complete for a neater finish, or small beading trims can be fitted to the baseboards. Saw cuts on the planks are usually required at edges and around cupboard and door entrances.
It is important to keep laminate clean, as dust, dirt, and sand particles may scratch the surface over time in high-traffic areas. It is also important to keep laminate relatively dry, since sitting water/moisture can cause the planks to swell, warp, etc., though some brands are equipped with water-resistant coatings. Water spills aren't a problem if they're wiped up quickly, and not allowed to sit for a prolonged period of time.
Adhesive felt pads are often placed on the feet of furniture on laminate floors to prevent scratching.
Inferior glueless laminate floors may gradually become separated, creating visible gaps between planks. It is important to "tap" the planks back together using the appropriate tool as gaps are noticed in order to prevent dirt filling the gaps, thus making it more difficult to put into place.
Quality glueless laminate floors use joining mechanisms which hold the planks together under constant tension which prevent dirt entering the joints and do not need "tapping" back together periodically.
The North American Laminate Flooring Association (NALFA) is a trade association of laminate flooring manufacturers and laminate flooring manufacturer suppliers in the United States and Canada. It is a standards developing organization accredited by the American National Standards Institute (ANSI) to develop voluntary consensus standards for laminate flooring materials, and it has established testing and performance criteria that are used in North America.
NALFA issues a certification mark named the NALFA Certification Seal which signifies that the product has passed 10 performance tests, has been proven to meet these standards by an independent, third-party testing lab, and has been manufactured in North America. The certification review includes:
1. Static Load – Measures the ability of laminate flooring to resist residual indentation resulting from a static load.
2. Thickness Swell – Measures the ability of laminate flooring to resist increase in thickness after being exposed to water.
3. Light Resistance – Measures the ability of laminate flooring to retain its color when exposed to a light source having a frequency range approximating sunlight through window glass. It is not intended to show the resistance to continuous exposure to outdoor weathering conditions.
4. Cleanability and Stain Resistance – Measures both the ease of cleanability and stain resistance of laminate flooring to common household substances.
5. Large Ball Resistance – Measures the ability of laminate flooring to resist fracture due to impact by a large diameter ball.
6. Small Ball Resistance – Measures the ability of laminate flooring to resist fracture due to impact by a small diameter ball.
7. Water Resistance – Measures the ability of the surface of laminate flooring to resist abrasive wear through the décor layer.
8. Dimension Tolerance – Measures the dimensional variance between tiles of laminate flooring in a manufactured free standing (unrestricted) shape in respect to thickness, length, width, straightness and squareness.
9. Castor Chair Resistance – Specifies a method for determining the change of appearance and stability of a laminate floor, including joints, under the movement of a castor chair.
10. Surface Bond – Measures the force required to delaminate or split away the surface of laminate flooring plank or tile.
Potential health effects and LEED status
Laminate flooring is often made of melamine resin, a compound made with formaldehyde. The formaldehyde is more tightly bound in MF than it is in Urea-Formaldehyde, reducing emissions and potential health effects. Thus LEED v2.2's EQ Credit 4.4 precludes the use of UF, but allows the use of MF.
Laminated flooring is commonly used in LEED residential and commercial applications.
Laminate flooring was invented in 1977 by the Swedish company Perstorp, and sold under the brand name Pergo. They had been making floor surfaces since 1923. The company first marketed its product to Europe in 1984, and later to the United States in 1994. Perstorp spun off its flooring division as the separate company named Pergo, now a subsidiary of Mohawk Industries. Pergo is the most widely known laminate flooring manufacturer, but the trademark PERGO is not synonymous for all laminate floors.
Glueless laminate flooring was invented in 1996 by the Swedish company Välinge Aluminium (now Välinge Innovation) and sold under the names of Alloc and Fiboloc. However, a system for holding flooring panels together was also developed in parallel by the Belgian company Unilin and released in 1997.
The two companies have been in a great number of legal conflicts over the years, and today most, if not all glueless locking flooring is made under license from either Välinge, Unilin, or even a combination of both.
There are many benefits to choosing a laminate floor over other types of flooring. Laminate flooring is quite versatile and durable. Due to laminate flooring being a printed strip of vinyl over a composite board many textures and styles of flooring can be replicated. Recently laminate floors have seen success in simulating stone and tile patterns as well as wood.
Cleaning laminate floors is easy and comparable to cleaning other hard surfaces such as hardwood floors. It is generally not recommended to mop laminate floors as this has been shown to cause damage by soaking into the composite portion which allows warping over time. Most manufacturers suggest using dry methods such as brooms to clean with occasional wet cleaning with more specialized mop-type products that do not leave excessive water on the flooring.
Installation is a large benefit of choosing laminate flooring. A generally handy person is well equipped to install laminate flooring as the locking and floating aspects of laminate floor are mostly self-explanatory. Also, due to the ease of installation, having professional flooring contractors install this type of floor is less expensive than other types of flooring such as tile or hardwood.
- About.com. "Laminate Flooring Pros and Cons". Retrieved 30 March 2012.
- Discovery Communications LLC. "Ultimate Guide to Laminate Flooring". Retrieved 30 March 2012.
- Todd, Debbie (28 July 2011). "Laminate Flooring – the right choice for me and it could be for you too". TH Services. Retrieved 10 January 2012.
- SandingLondon.co.uk. "Concrete Underlayment". Retrieved 25 February 2015.
- "Domestic Programs (American National Standards) Overview". ANSI. Retrieved 3 May 2012.
- "Under Your Feet". New York Times. Retrieved 3 May 2012.
- "Performance Testing Standards". NALFA. Retrieved 3 May 2012.
- Pergo. "Pergo: the story of laminate". Retrieved 24 February 2015.
- Saabira Chaudhuri (29 October 2012). "Mohawk to acquire Pergo for $150 million in cash". marketwatch.com. Retrieved 29 August 2013.