Philips SAA 1099

Philips SAA 1099
Pin	Name	Dir	Description
1	/WR		Write Enable
2	/CS		Chip Select
3	A0		Control/Address Selec
4	OUTR		Sound Output Right
5	OUTL		Sound Output Left
6	IREF		Reference Current Supply
7	/DTACK		Data Transfer Acknowledge
8	CLK		External Clock
9	VSS		Ground
10	D0		Data Bus 0
11	D1		Data Bus 1
12	D2		Data Bus 2
13	D3		Data Bus 3
14	D4		Data Bus 4
15	D5		Data Bus 5
16	D6		Data Bus 6
17	D7		Data Bus 7
18	VDD		Power +5V

The Philips SAA1099 sound generator was a 6-voice sound chip used by some 1980's devices, notably:

• The SAM Coupé British-made computer
• The Creative Music System (C/MS) by Creative Labs, which was also marketed at RadioShack as the Game Blaster. They had 2 chips, for 12 voices.
• Their Sound Blaster 1.0 cards (also 1.5 and 2.0 if you added it on). However that card also had an OPL2 chip (aka YM3812), which became much more popular.
• Silicon Graphics use it on the IO2 and IO3 board for sound generation, but this feature was almost never documented and used, but the SAA1099 is present and usable if addressed directly.

The chip produced square waves and noise (at 3 different frequencies). Its main feature was that it could output in stereo (it was possible to set the left and right channel volume independently).

External links

• SAA1099 documentation

• A package which contains a SAA1099 emulator for Windows, and a few demo tunes
• SAASound, a SAA1099 emulation library by Dave Hooper
• SAA1099P chips and kits supplier