A policy is a principle to guide decisions and achieve rational outcomes. A policy is a statement of intent, and is implemented as a procedure or protocol. Policies are generally adopted by the Board of or senior governance body within an organization whereas procedures or protocols would be developed and adopted by senior executive officers. Policies can assist in both subjective and objective decision making. Policies to assist in subjective decision making would usually assist senior management with decisions that must consider the relative merits of a number of factors before making decisions and as a result are often hard to objectively test e.g. work-life balance policy. In contrast policies to assist in objective decision making are usually operational in nature and can be objectively tested e.g. password policy.
The term may apply to government, private sector organizations and groups, as well as individuals. Presidential executive orders, corporate privacy policies, and parliamentary rules of order are all examples of policy. Policy differs from rules or law. While law can compel or prohibit behaviors (e.g. a law requiring the payment of taxes on income), policy merely guides actions toward those that are most likely to achieve a desired outcome.
Policy or policy study may also refer to the process of making important organizational decisions, including the identification of different alternatives such as programs or spending priorities, and choosing among them on the basis of the impact they will have. Policies can be understood as political, management, financial, and administrative mechanisms arranged to reach explicit goals. In public corporate finance, a critical accounting policy is a policy for a firm/company or an industry which is considered to have a notably high subjective element, and that has a material impact on the financial statements.
The intended effects of a policy vary widely according to the organization and the context in which they are made. Broadly, policies are typically instituted to avoid some negative effect that has been noticed in the organization, or to seek some positive benefit.
Corporate purchasing policies provide an example of how organizations attempt to avoid negative effects. Many large companies have policies that all purchases above a certain value must be performed through a purchasing process. By requiring this standard purchasing process through policy, the organization can limit waste and standardize the way purchasing is done.
The State of California provides an example of benefit-seeking policy. In recent years, the numbers of hybrid cars in California has increased dramatically, in part because of policy changes in Federal law that provided USD $1,500 in tax credits (since phased out) as well as the use of high-occupancy vehicle lanes to hybrid owners (no longer available for new hybrid vehicles). In this case, the organization (state and/or federal government) created an effect (increased ownership and use of hybrid vehicles) through policy (tax breaks, highway lanes).
Policies frequently have side effects or unintended consequences. Because the environments that policies seek to influence or manipulate are typically complex adaptive systems (e.g. governments, societies, large companies), making a policy change can have counterintuitive results. For example, a government may make a policy decision to raise taxes, in hopes of increasing overall tax revenue. Depending on the size of the tax increase, this may have the overall effect of reducing tax revenue by causing capital flight or by creating a rate so high that citizens are deterred from earning the money that is taxed. (See the Laffer curve.)
The policy formulation process theoretically includes an attempt to assess as many areas of potential policy impact as possible, to lessen the chances that a given policy will have unexpected or unintended consequences. Because of the nature of some complex adaptive systems such as societies and governments, it may not be possible to assess all possible impacts of a given policy.
In political science, the policy cycle is a tool used for the analyzing of the development of a policy item. It can also be referred to as a "stagist approach", "stages heuristic" or "stages approach". It is thus a rule of thumb rather than the actual reality of how policy is created, but has been influential in how political scientists looked at policy in general. It was developed as a theory from Harold Lasswell's work.
One version has the following stages:
- Agenda setting (Problem identification) - The recognition of certain subject as a problem demanding further government attention.
- Policy Formulation - Involves exploring a variation of options or alternative courses of action available for addressing the problem. (appraisal, dialogue, formulation, and consolidation)
- Decision-making - Government decides on an ultimate course of action, whether to perpetuate the policy status quo or alter it. (Decision could be 'positive', 'negative', or 'no-action')
- Implementation - The ultimate decision made earlier will be put into practice.
- Evaluation - Assesses the effectiveness of a public policy in terms of its perceived intentions and results. Policy actors attempt to determine whether the course of action is a success or failure by examining its impact and outcomes.
An eight step policy cycle is developed in detail in The Australian Policy Handbook by Peter Bridgman and Glyn Davis: (now with Catherine Althaus in its 4th and 5th editions)
- Issue identification
- Policy analysis
- Policy instrument development
- Consultation (which permeates the entire process)
The Althaus, Bridgman & Davis model is heuristic and iterative. It is intentionally normative and not meant to be diagnostic or predictive. Policy cycles are typically characterized as adopting a classical approach. Accordingly some postpositivist academics challenge cyclical models as unresponsive and unrealistic, preferring systemic and more complex models. They consider a broader range of actors involved in the policy space that includes civil society organisations, the media, intellectuals, think tanks or policy research institutes, corporations, lobbyists, etc.
Policies are typically promulgated through official written documents. Policy documents often come with the endorsement or signature of the executive powers within an organization to legitimize the policy and demonstrate that it is considered in force. Such documents often have standard formats that are particular to the organization issuing the policy. While such formats differ in form, policy documents usually contain certain standard components including :
- A purpose statement, outlining why the organization is issuing the policy, and what its desired effect or outcome of the policy should be.
- An applicability and scope statement, describing who the policy affects and which actions are impacted by the policy. The applicability and scope may expressly exclude certain people, organizations, or actions from the policy requirements. Applicability and scope is used to focus the policy on only the desired targets, and avoid unintended consequences where possible.
- An effective date which indicates when the policy comes into force. Retroactive policies are rare, but can be found.
- A responsibilities section, indicating which parties and organizations are responsible for carrying out individual policy statements. Many policies may require the establishment of some ongoing function or action. For example, a purchasing policy might specify that a purchasing office be created to process purchase requests, and that this office would be responsible for ongoing actions. Responsibilities often include identification of any relevant oversight and/or governance structures.
- Policy statements indicating the specific regulations, requirements, or modifications to organizational behavior that the policy is creating. Policy statements are extremely diverse depending on the organization and intent, and may take almost any form.
Some policies may contain additional sections, including:
- Background, indicating any reasons, history, and intent that led to the creation of the policy, which may be listed as motivating factors. This information is often quite valuable when policies must be evaluated or used in ambiguous situations, just as the intent of a law can be useful to a court when deciding a case that involves that law.
- Definitions, providing clear and unambiguous definitions for terms and concepts found in the policy document.
Theodore J. Lowi, famous American political scientist proposed four types of policy namely distributive, redistributive, regulatory and constituent in his article 'Four systems of Policy, Politics and Choice' and in 'American Business, Public Policy, Case Studies and Political Theory'. Policy addresses the intent of the organization, whether government, business, professional, or voluntary. Policy is intended to affect the 'real' world, by guiding the decisions that are made. Whether they are formally written or not, most organizations have identified policies.
Policies may be classified in many different ways. The following is a sample of several different types of policies broken down by their effect on members of the organization.
Distributive policies extend goods and services to members of an organization, as well as distributing the costs of the goods/services amongst the members of the organization. Examples include government policies that impact spending for welfare, public education, highways, and public safety, or a professional organization's benefits plan.
Regulatory policies, or mandates, limit the discretion of individuals and agencies, or otherwise compel certain types of behavior. These policies are generally thought to be best applied when good behavior can be easily defined and bad behavior can be easily regulated and punished through fines or sanctions. An example of a fairly successful public regulatory policy is that of a speed limit.
Constituent policies create executive power entities, or deal with laws. Constituent policies also deal with Fiscal Policy in some circumstances.
Policies are dynamic; they are not just static lists of goals or laws. Policy blueprints have to be implemented, often with unexpected results. Social policies are what happens 'on the ground' when they are implemented, as well as what happens at the decision making or legislative stage.
When the term policy is used, it may also refer to:
- Official government policy (legislation or guidelines that govern how laws should be put into operation)
- Broad ideas and goals in political manifestos and pamphlets
- A company or organization's policy on a particular topic. For example, the equal opportunity policy of a company shows that the company aims to treat all its staff equally.
The actions the organization actually takes may often vary significantly from stated policy. This difference is sometimes caused by political compromise over policy, while in other situations it is caused by lack of policy implementation and enforcement. Implementing policy may have unexpected results, stemming from a policy whose reach extends further than the problem it was originally crafted to address. Additionally, unpredictable results may arise from selective or idiosyncratic enforcement of policy.
Types of policy analysis include:
- Causal (resp. non-causal)
- Deterministic (resp. stochastic, randomized and sometimes non-deterministic)
- Memoryless (e.g. non-stationary)
- Opportunistic (resp. non-opportunistic)
- Stationary (resp. non-stationary)
These qualifiers can be combined, so for example you could have a stationary-memoryless-index policy.
Specific policy types
- Company Policy
- Communications and Information Policy is under Information policy
- Human resource policies
- Public policy
- Defense policy
- Domestic policy
- Economic policy
- Education policy
- Energy policy
- Environmental Policy and National Environmental Policy Act
- Foreign policy
- Forest policy
- Health policy
- Housing policy
- Information policy
- Macroeconomic policy
- Monetary policy
- Population policy
- Public policy in law
- Science policy
- Security policy
- Social policy
- Transportation policy
- Urban policy
- Water policy
Other uses of the term
- In enterprise architecture for systems design, policy appliances are technical control and logging mechanisms to enforce or reconcile policy (systems use) rules and to ensure accountability in information systems.
- In insurance, policies are contracts between insurer and insured used to indemnify (protect) against potential loss from specified perils. While these documents are referred to as policies, they are in actuality a form of contract - see insurance contract.
- In gambling, policy is a form of an unsanctioned lottery, where players purport to purchase insurance against a chosen number being picked by a legitimate lottery. Or can refer to an ordinary Numbers game
- In artificial intelligence planning and reinforcement learning, a policy prescribes a non-empty deliberation (sequence of actions) given a non-empty sequence of states.
- In debate, the term "policy" is slang for policy or cross-examination debate.
- Distributive tendency
- Iron triangle
- Mandate (politics)
- Overton window
- Pattern language
- Policy alienation
- Policy analysis
- Policy Governance
- Policy studies
- Political science
- Program evaluation
- Public administration
- Public health
- Public policy (law)
- Public policy schools
- Public services
- Social contract
- Social welfare
- Social work
- Think tank
Notes and references
- Anderson, Chris. What's the Difference Between Policies and Procedures?, Bizmanualz, April 4, 2005.
- Robert T. Nakamura, THE TEXTBOOK POLICY PROCESS AND IMPLEMENTATION RESEARCH: Review of Policy Research Volume 7, Issue 1, pages 142–154, September 1987 http://onlinelibrary.wiley.com/doi/10.1111/j.1541-1338.1987.tb00034.x/abstract
- Young, John and Enrique Mendizabal. Helping researchers become policy entrepreneurs, Overseas Development Institute, London, September 2009.
- Blakemore, Ken (1998). Social Policy: an Introduction.
- Althaus, Catherine; Bridgman, Peter & Davis, Glyn (2007). The Australian Policy Handbook (4th ed.). Sydney: Allen & Unwin.
- Müller, Pierre; Surel, Yves (1998). L'analyse des politiques publiques (in French). Paris: Montchrestien.
- Paquette, Laure (2002). Analyzing National and International Policy. Rowman Littlefield.
- Howard, Cosmo. "The Policy Cycle: a Model of Post-Machiavellian Policy Making?" The Australian Journal of Public Administration, September 2005.
- Jenkins, William (1978). Policy Analysis: A Political and Organizational Perspective. London: Martin Robertson.
- Lowi, Theodore J.; Bauer, Raymond A.; De Sola Pool, Ithiel; Dexter, Lewis A. (1964). "American Business, Public Policy, Case-Studies, and Political Theory". World Politics (Cambridge University Press) 16 (4): 687–713. doi:10.2307/2009452. JSTOR 2009452.
- Lowi, Theodore J. (1968). "Four Systems of Policy, Politics, and Choice". Public Administration Review (American Society for Public Administration) 33 (3): 298–310. doi:10.2307/974990. JSTOR 974990.
- Feltus, Christophe (2008). "Preliminary Literature Review of Policy Engineering Methods - Toward Responsibility Concept". Proceeding of 3rd international conference on information and communication technologies : from theory to applications (ICTTA 08), Damascus, Syria; Preliminary Literature Review of Policy Engineering Methods - Toward Responsibility Concept.
- Lowi, Theodore J. (1985). "The State in Politics". In Noll, Roger G. (ed.). Regulatory Policy and the social Sciences. Berkeley: University of California Press. pp. 67–110.
- Spitzer, Robert J. (June 1987). "Promoting Policy Theory: Revising the Arenas of Power". Policy Studies Journal 15 (4): 675–689. doi:10.1111/j.1541-0072.1987.tb00753.x.
- Kellow, Aynsley (Summer 1988). "Promoting Elegance in Policy Theory: Simplifying Lowi's Arenas of Power". Policy Studies Journal 16 (4): 713–724. doi:10.1111/j.1541-0072.1988.tb00680.x.
- Heckathorn, Douglas D.; Maser, Steven M. (1990). "The Contractual Architecture of Public Policy: A Critical Reconstruction of Lowi's Typology". The Journal of Politics (Cambridge University Press) 52 (4): 1101–1123. doi:10.2307/2131684. JSTOR 2131684.
- Smith, K. B. (2002). "Typologies, Taxonomies, and the Benefits of Policy Classification". Policy Studies Journal 30 (3): 379–395. doi:10.1111/j.1541-0072.2002.tb02153.x.
- Greenberg, George D. et al. (December 1977). "Developing Public Policy Theory: Perspectives from Empirical Research". American Political Science Review (American Political Science Association) 71 (4): 1532–1543. doi:10.2307/1961494. JSTOR 1961494.
- Dye, Thomas R. (1976). Policy Analysis. University of Alabama Press.
- Stone, Diane."Global Public Policy, Transnational Policy Communities and their Networks", Journal of Policy Sciences, 2008
|Wikiquote has quotations related to: Policy|
|Look up policy in Wiktionary, the free dictionary.|