|Made by Freescale|
|Made by IBM|
The PowerPC e6500 is a multithreaded 64-bit Power Architecture-based microprocessor core from Freescale Semiconductor. e6500 will power the entire range of QorIQ AMP Series system on a chip (SoC) processors which share the common naming scheme: "Txxxx". Hard samples, manufactured on a 28 nm process, available in early 2012 with full production later in 2012.
It has a revised memory subsystem compared to the previous e5500 core with four cores combined into a CPU Cluster, sharing a large L2 cache and the e6500 cores supports up to eight CPU Clusters for very large multiprocessing implementations. The core is the first multithreaded core designed by Freescale and reintroduces an enhanced version of AltiVec to their products. The multithreading allows for two virtual cores per hard core and one virtual core in an e6500 can often perform better than an entire e5500 core since Freescale essentially duplicated a lot of logic instead of just virtualizing it, in addition to other enhancements to the core.
Each core have five integer units (four simple and one complex), two load-store units, one 128-bit AltiVec unit, 32+32 kB instruction and data L1 caches. Speeds range up to 2.5 GHz, and the core is designed to be highly configurable via the CoreNet fabric and meet the specific needs of embedded applications with features like multi-core operation and interface for auxiliary application processing units (APU).
The e6501 core is a revision introduced in 2013 with enhanced virtualization interrupt support.
- QorIQ AMP Series T4240 as the first processor revealed with 12 cores followed by T2080 and T2081 with four cores and speeds up to 1.8 GHz.
- QorIQ Qonverge B4420 and B4860 - with a mix of e6500 cores and StarCore SC3900 DSPs for high end telecom applications such as 4G/LTE macrocells running at 1.6 and 1.8 GHz.
- Freescale Drives Embedded Multicore Innovation with New QorIQ Advanced Multiprocessing Series
- QorIQ Communications Platforms