Rabbet
From Wikipedia, the free encyclopedia
(Redirected from Rabbit Joint)
A rabbet (rebate in British English[1][2]) is a recess or groove cut into the edge of a piece of machineable material, usually wood. When viewed in cross-section, a rabbet is two-sided and open to the edge or end of the surface into which it is cut.
The word rabbet is from Old French rabbat, "a recess into a wall."[3]
An example of the use of a rabbet is in a glazing bar where it makes provision for the insertion of the pane of glass and putty. It may also accommodate the edge of the back panel of a cabinet. It is also used in door and casement window jambs, and for shiplap planking. A rabbet can be used to form a joint with another piece of wood (often containing a dado).
[edit] Methods
A rabbet router using a straight or rebate bit
- Rabbetting or Rebate plane or a shoulder plane
- Circular saw with multiple passes (depending on width and depth)
- Dado set in a single pass
- Spindle moulder
- Hand saw and chisel
- Bandsaw
- Jointer equipped with a rabbet ledge
[edit] See also
[edit] Reference
- ^ "Oxford Dictionaries - rebate". http://oxforddictionaries.com/definition/rebate--2. Retrieved 2011-12-12.
- ^ "Oxford Dictionaries - rabbet". http://oxforddictionaries.com/definition/rabbet?q=rabbet. Retrieved 2011-12-12.
- ^ http://www.etymonline.com/index.php?term=rabbet
|
||||||||||||||||||||||||||||||||||||||||||||
 |
This article about joinery, woodworking joints, carpentry or woodworking is a stub. You can help Wikipedia by expanding it. |
