Reciprocating motion

Reciprocating motion, also called reciprocation, is a repetitive up-and-down or back-and-forth linear motion. It is found in a wide range of mechanisms, including reciprocating engines and pumps. The two opposite motions that comprise a single reciprocation cycle are called strokes.^{[citation needed]}

A crank can be used to convert into reciprocating motion, or conversely turn reciprocating motion into circular motion.^{[citation needed]}

For example, inside an internal combustion engine (a type of reciprocating engine), the expansion of burning fuel in the cylinders periodically pushes the piston down, which, through the connecting rod, turns the crankshaft. The continuing rotation of the crankshaft drives the piston back up, ready for the next cycle. The piston moves in a reciprocating motion, which is converted into circular motion of the crankshaft, which ultimately propels the vehicle or does other useful work.^{[citation needed]}

The reciprocating motion of a pump piston is close to, but different from, sinusoidal simple harmonic motion. Assuming the wheel is driven at a perfect constant rotational velocity, the point on the crankshaft which connects to the connecting rod rotates smoothly at a constant velocity in a circle. Thus, the displacement of that point, is indeed exactly sinusoidal by definition. However, during the cycle, the angle of the connecting rod changes continuously. So, the horizontal displacement of the "far" end of the connecting rod (i.e., connected to the piston) differs slightly from sinusoidal. Circumstances where the wheel is not spinning with perfect constant rotational velocity, such as a steam locomotive starting up from a stop, are very much not sinusoidal.^{[citation needed]} So basically a up and down a repetitive up-and-down or back-and-forth linear motion.

References

Oscillation – Repetitive variation of some measure about a central value
Stroboscope – Instrument used to make a cyclically moving object appear to be slow-moving, or stationary
Reciprocating saw – Type of machine powered saw
Reciprocating engine – Engine utilising one or more reciprocating pistons
Rotary reciprocating saw – Type of mechanical saw
Agitation – Device or mechanism which shakes or stirs something
Scotch yoke – Mechanism to convert between rotational and reciprocating motion
Crank – Simple machine transferring motion to or from a rotating shaft at a distance from the centreline
Crankshaft – Mechanism for converting reciprocating motion to rotation
Swashplate – Mechanism to convert between reciprocating and rotary motion
Trip hammer – Type of blacksmithing tool
Slider-crank linkage – Mechanism for conveting rotary motion into linear motion
Straight line mechanism – Mechanisms generating real or approximate straight line motion
Reciprocating compressor – Device used to pump gases at high pressure
Sun and planet gear – Type of gear used in early beam engines

This engineering-related article is a stub. You can help Wikipedia by expanding it.

References

See also