# Gnomonic projection

(Redirected from Rectilinear projection)
Great circles transform to straight lines via gnomonic projection
Examples of gnomonic projections

A gnomonic map projection displays all great circles as straight lines, resulting in any line segment on a gnomonic map showing the shortest route between the segment's two endpoints. This is achieved by casting surface points of the sphere onto a tangent plane, each landing where a ray from the center of the earth passes through the point on the surface and then on to the plane. No distortion occurs at the tangent point, but distortion increases rapidly away from it. Less than half of the sphere can be projected onto a finite map. Consequently a rectilinear photographic lens cannot image more than 180 degrees.

## History

The gnomonic projection is said to be the oldest map projection, developed by Thales in the 6th century BC. The path of the shadow-tip or light-spot in a nodus-based sundial traces out the same hyperbolae formed by parallels on a gnomonic map.

## Properties

Since meridians and the equator are great circles, they are always shown as straight lines on a gnomonic map.

• If the tangent point is one of the poles then the meridians are radial and equally spaced. The equator is at infinity in all directions. Other parallels are depicted as concentric circles.
• If the tangent point is not on a pole or the equator, then the meridians are radially outward straight lines from a Pole, but not equally spaced. The equator is a straight line that is perpendicular to only one meridian, indicating that the projection is not conformal.
• If the tangent point is on the equator then the meridians are parallel but not equally spaced. The equator is a straight line perpendicular to the meridians. Other parallels are depicted as hyperbolae.

Gnomonic projection of the world centered on the geographic North Pole

As with all azimuthal projections, angles from the tangent point are preserved. The map distance from that point is a function r(d) of the true distance d, given by

$r(d) = R\,\tan (d/R)$

where R is the radius of the Earth. The radial scale is

$r'(d) = \frac{1}{\cos^2(d/R)}$

and the transverse scale

$\frac{1}{\cos(d/R)}$

so the transverse scale increases outwardly, and the radial scale even more.

## Use

Gnomonic projections are used in seismic work because seismic waves tend to travel along great circles. They are also used by navies in plotting direction finding bearings, since radio signals travel along great circles. Meteors also travel along great circles, with the Gnomonic Atlas Brno 2000.0 being the IMO's recommended set of star charts for visual meteor observations. Aircraft and ship pilots use the projection to find the shortest route between start and destination.

The gnomonic projection is used extensively in photography, where it is called rectilinear projection.