Regular polygon

(Redirected from Regular polygons)
Set of convex regular n-gons

Regular polygons

Edges and vertices n
Schläfli symbol {n}
Coxeter–Dynkin diagram
Symmetry group Dn, order 2n
Dual polygon Self-dual
Area
(with s=side length)
$A = \tfrac14ns^2 \cot \frac{\pi}{n}$
Internal angle $(n-2)\times \frac{180^\circ}{n}$
Internal angle sum $\left(n-2\right)\times 180^\circ$
Properties convex, cyclic, equilateral, isogonal, isotoxal

In Euclidean geometry, a regular polygon is a polygon that is equiangular (all angles are equal in measure) and equilateral (all sides have the same length). Regular polygons may be convex or star. In the limit, a sequence of regular polygons with an increasing number of sides becomes a circle, if the perimeter is fixed, or a regular apeirogon, if the edge length is fixed.

General properties

Regular convex and star polygons with 3 to 12 vertices labelled with their Schläfli symbols

These properties apply to all regular polygons, whether convex or star.

A regular n-sided polygon has rotational symmetry of order n.

All vertices of a regular polygon lie on a common circle (the circumscribed circle), i.e., they are concyclic points. That is, a regular polygon is a cyclic polygon.

Together with the property of equal-length sides, this implies that every regular polygon also has an inscribed circle or incircle that is tangent to every side at the midpoint. Thus a regular polygon is a tangential polygon.

A regular n-sided polygon can be constructed with compass and straightedge if and only if the odd prime factors of n are distinct Fermat primes. See constructible polygon.

Symmetry

The symmetry group of an n-sided regular polygon is dihedral group Dn (of order 2n): D2, D3, D4, ... It consists of the rotations in Cn, together with reflection symmetry in n axes that pass through the center. If n is even then half of these axes pass through two opposite vertices, and the other half through the midpoint of opposite sides. If n is odd then all axes pass through a vertex and the midpoint of the opposite side.

Regular convex polygons

All regular simple polygons (a simple polygon is one that does not intersect itself anywhere) are convex. Those having the same number of sides are also similar.

An n-sided convex regular polygon is denoted by its Schläfli symbol {n}. For n < 3 we have two degenerate cases:

• Monogon {1}: degenerate in ordinary space. (Most authorities do not regard the monogon as a true polygon, partly because of this, and also because the formulae below do not work, and its structure is not that of any abstract polygon.)
• Digon {2}: a "double line segment": degenerate in ordinary space. (Some authorities do not regard the digon as a true polygon because of this.)

In certain contexts all the polygons considered will be regular. In such circumstances it is customary to drop the prefix regular. For instance, all the faces of uniform polyhedra must be regular and the faces will be described simply as triangle, square, pentagon, etc.

Angles

For a regular convex n-gon, each interior angle has a measure of:

$\left(1-\frac{2}{n}\right)\times 180$ (or equally of $(n-2)\times \frac{180}{n}$ ) degrees,
or $\frac{(n-2)\pi}{n}$ radians,
or $\frac{(n-2)}{2n}$ full turns,

and each exterior angle (i.e. supplementary to the interior angle) has a measure of $\tfrac{360}{n}$ degrees, with the sum of the exterior angles equal to 360 degrees or 2π radians or one full turn.

Diagonals

For n > 2 the number of diagonals is $\tfrac{n (n-3)}{2}$, i.e., 0, 2, 5, 9, ... for a triangle, square, pentagon, hexagon, .... The diagonals divide the polygon into 1, 4, 11, 24, ... pieces.

For a regular n-gon inscribed in a unit-radius circle, the product of the distances from a given vertex to all other vertices (including adjacent vertices and vertices connected by a diagonal) equals n.

Interior points

For a regular n-gon, the sum of the perpendicular distances from any interior point to the n sides is n times the apothem[1]:p. 72 (the apothem being the distance from the center to any side). This is a generalization of Viviani's theorem for the n=3 case.[2][3]

Regular polygon with n = 5: pentagon with side s, circumradius R and apothem a

The circumradius R from the center of a regular polygon to one of the vertices is related to the side length s or to the apothem a by

$R=\frac{s}{2 \sin{ \frac{\pi}{n} }} = \frac{a}{\cos{ \frac{\pi}{n} }}$

For constructible polygons, algebraic expressions for these relationships exist; see Bicentric polygon#Regular polygons.

The sum of the perpendiculars from a regular n-gon's vertices to any line tangent to the circumcircle equals n times the circumradius.[1]:p. 73

The sum of the squared distances from the vertices of a regular n-gon to any point on its circumcircle equals 2nR2 where R is the circumradius.[1]:p.73

The sum of the squared distances from the midpoints of the sides of a regular n-gon to any point on the circumcircle is 2nR2 — (ns2)/4, where s is the side length and R is the circumradius.[1]:p. 73

Area

The area A of a convex regular n-sided polygon having side s, circumradius R, apothem a, and perimeter p is given by[4][5]

$A= \tfrac{1}{2}nsa = \tfrac{1}{2}pa = \tfrac{1}{4}ns^2\cot{\tfrac{\pi}{n}} = na^2\tan{\tfrac{\pi}{n}} = \tfrac{1}{2}nR^2\sin{\tfrac{2\pi}{n}}$

For regular polygons with side s=1, circumradius R =1, or apothem a=1, this produces the following table:[6]

Number
of sides
Area when side s=1 Area when circumradius R=1 Area when apothem a=1
Exact Approximate Exact Approximate Approximate as
fraction of circumcircle area
Exact Approximate Approximate as
fraction of incircle area
n $\tfrac{n}{4}\cot{\tfrac{\pi}{n}}$ $\tfrac{n}{2}\sin{\tfrac{2\pi}{n}}$ $\tfrac{n}{2\pi}\sin{\tfrac{2\pi}{n}}$ $n \tan{\tfrac{\pi}{n}}$ $\tfrac{n}{\pi}\tan{\tfrac{\pi}{n}}$
3 3/4 0.433012702 33/4 1.299038105 0.4134966714 33 5.196152424 1.653986686
4 1 1.000000000 2 2.000000000 0.6366197722 4 4.000000000 1.273239544
5 1/425+105 1.720477401 5/4(5+5)/2 2.377641291 0.7568267288 55-25 3.632712640 1.156328347
6 33/2 2.598076211 33/2 2.598076211 0.8269933428 23 3.464101616 1.102657791
7 3.633912444 2.736410189 0.8710264157 3.371022333 1.073029735
8 2+22 4.828427125 22 2.828427125 0.9003163160 8(2-1) 3.313708500 1.054786175
9 6.181824194 2.892544244 0.9207254290 3.275732109 1.042697914
10 5/25+25 7.694208843 5/2(5-5)/2 2.938926262 0.9354892840 225-105 3.249196963 1.034251515
11 9.365639907 2.973524496 0.9465022440 3.229891423 1.028106371
12 6+33 11.19615242 3 3.000000000 0.9549296586 12(2-3) 3.215390309 1.023490523
13 13.18576833 3.020700617 0.9615188694 3.204212220 1.019932427
14 15.33450194 3.037186175 0.9667663859 3.195408642 1.017130161
15 17.64236291 3.050524822 0.9710122088 3.188348426 1.014882824
16 4 (1+2+2 (2+2)) 20.10935797 42-2 3.061467460 0.9744953584 16 (1+2)(2 (2-2)-1) 3.182597878 1.013052368
17 22.73549190 3.070554163 0.9773877456 3.177850752 1.011541311
18 25.52076819 3.078181290 0.9798155361 3.173885653 1.010279181
19 28.46518943 3.084644958 0.9818729854 3.170539238 1.009213984
20 5 (1+5+5+25) 31.56875757 5/2 (5-1) 3.090169944 0.9836316430 20 (1+5-5+25) 3.167688806 1.008306663
100 795.5128988 3.139525977 0.9993421565 3.142626605 1.000329117
1000 79577.20975 3.141571983 0.9999934200 3.141602989 1.000003290
10,000 7957746.893 3.141592448 0.9999999345 3.141592757 1.000000033
1,000,000 79577471545 3.141592654 1.000000000 3.141592654 1.000000000

Of all n-gons with a given perimeter, the one with the largest area is regular.[7]

Regular skew polygons

 The cube contains a skew regular hexagon, seen as 6 red edges zig-zagging between two planes perpendicular to the cube's diagonal axis. The zig-zagging side edges of a n-antiprism represent a regular skew 2n-gon, as shown in this 17-gonal antiprism.

A regular skew polygon in 3-space can be seen as nonplanar paths zig-zagging between two parallel planes, defined as the side-edges of a uniform antiprism. All edges and internal angles are equal.

 The Platonic solids (the tetrahedron, cube, octahedron, dodecahedron, and icosahedron) have Petrie polygons, seen in red here, with sides 4, 6, 6, 10, and 10 respectively.

More generally regular skew polygons can be defined in n-space. Examples include the Petrie polygons, polygonal paths of edges that divide a regular polytope into two halves, and seen as a regular polygon in orthogonal projection.

In the infinite limit regular skew polygons become skew apeirogons.

Regular star polygons

Regular star polygons
2<2q<p, gcd(p,q)=1
 {5/2} {7/2} {7/3}...
Schläfli symbol {p/q}
Vertices and Edges p
Density q
Coxeter diagram
Symmetry group Dihedral (Dp)
Dual polygon Self-dual
Internal angle
(degrees)
$\frac{180(p-2q)}{p}$[8]

A non-convex regular polygon is a regular star polygon. The most common example is the pentagram, which has the same vertices as a pentagon, but connects alternating vertices.

For an n-sided star polygon, the Schläfli symbol is modified to indicate the density or "starriness" m of the polygon, as {n/m}. If m is 2, for example, then every second point is joined. If m is 3, then every third point is joined. The boundary of the polygon winds around the center m times.

The (non-degenerate) regular stars of up to 12 sides are:

m and n must be coprime, or the figure will degenerate.

The degenerate regular stars of up to 12 sides are:

• Square - {4/2}
• Hexagons – {6/2}, {6/3}
• Octagons – {8/2}, {8/4}
• Enneagon – {9/3}
• Decagons – {10/2}, {10/4} and {10/5}
• Dodecagons – {12/2}, {12/3}, {12/4} and {12/6}
Two interpretations of {6/2}
Grünbaum
{6/2} or 2{3}[9]
Coxeter
2{3} or {6}[2{3}]{6}
Doubly-wound hexagon Hexagram as a compound
of two triangles

Depending on the precise derivation of the Schläfli symbol, opinions differ as to the nature of the degenerate figure. For example {6/2} may be treated in either of two ways:

• For much of the 20th century (see for example Coxeter (1948)), we have commonly taken the /2 to indicate joining each vertex of a convex {6} to its near neighbors two steps away, to obtain the regular compound of two triangles, or hexagram.
Coxeter clarifies this regular compound with a notation {kp}[k{p}]{kp} for the compound {p/k}, so the hexagram is represented as {6}[2{3}]{6}.[10] More compactly Coxeter also writes 2{n/2}, like 2{3} for a hexagram as compound as alternations of regular even-sided polygons, with italics on the leading factor to differentiate it from the coinciding interpretation.[11]
• Many modern geometers, such as Grünbaum (2003),[9] regard this as incorrect. They take the /2 to indicate moving two places around the {6} at each step, obtaining a "double-wound" triangle that has two vertices superimposed at each corner point and two edges along each line segment. Not only does this fit in better with modern theories of abstract polytopes, but it also more closely copies the way in which Poinsot (1809) created his star polygons – by taking a single length of wire and bending it at successive points through the same angle until the figure closed.

Duality of regular polygons

All regular polygons are self-dual to congruency, and for odd n they are self-dual to identity.

In addition, the regular star figures (compounds), being composed of regular polygons, are also self-dual.

Regular polygons as faces of polyhedra

A uniform polyhedron has regular polygons as faces, such that for every two vertices there is an isometry mapping one into the other (just as there is for a regular polygon).

A quasiregular polyhedron is a uniform polyhedron which has just two kinds of face alternating around each vertex.

A regular polyhedron is a uniform polyhedron which has just one kind of face.

The remaining (non-uniform) convex polyhedra with regular faces are known as the Johnson solids.

A polyhedron having regular triangles as faces is called a deltahedron.

Notes

1. ^ a b c d Johnson, Roger A., Advanced Euclidean Geometry, Dover Publ., 2007 (orig. 1929).
2. ^ Pickover, Clifford A, The Math Book, Sterling, 2009: p. 150
3. ^ Chen, Zhibo, and Liang, Tian. "The converse of Viviani's theorem", The College Mathematics Journal 37(5), 2006, pp. 390–391.
4. ^ "Math Open Reference". Retrieved 4 Feb 2014.
5. ^
6. ^ Results for R=1 and a=1 obtained with Maple, using function definition:

f := proc (n) options operator, arrow; [ [convert((1/4)*n*cot(Pi/n), radical), convert((1/4)*n*cot(Pi/n), float)], [convert((1/2)*n*sin(2*Pi/n), radical), convert((1/2)*n*sin(2*Pi/n), float), convert((1/2)*n*sin(2*Pi/n)/Pi, float)], [convert(n*tan(Pi/n), radical), convert(n*tan(Pi/n), float), convert(n*tan(Pi/n)/Pi, float)] ] end proc

The expressions for n=16 are obtained by twice applying the tangent half-angle formula to tan(π/4)

7. ^ Chakerian, G.D. "A Distorted View of Geometry." Ch. 7 in Mathematical Plums (R. Honsberger, editor). Washington, DC: Mathematical Association of America, 1979: 147.
8. ^ Kappraff, Jay (2002). Beyond measure: a guided tour through nature, myth, and number. World Scientific. p. 258. ISBN 978-981-02-4702-7.
9. ^ a b
10. ^ Regular polytopes, p.95
11. ^ Coxeter, The Densities of the Regular Polytopes II, 1932, p.53

References

• Coxeter, H.S.M. (1948). "Regular Polytopes". Methuen and Co.
• Grünbaum, B.; Are your polyhedra the same as my polyhedra?, Discrete and comput. geom: the Goodman-Pollack festschrift, Ed. Aronov et al., Springer (2003), pp. 461–488.
• Poinsot, L.; Memoire sur les polygones et polyèdres. J. de l'École Polytechnique 9 (1810), pp. 16–48.