Rolls-Royce RB106

From Wikipedia, the free encyclopedia
Jump to: navigation, search
RB106
Type Turbojet
Manufacturer Rolls-Royce Limited
First run 1953

The Rolls-Royce RB.106 was an advanced military turbojet engine design of the 1950s by Rolls-Royce Limited. The work was sponsored by the Ministry of Supply.

Design and development[edit]

The RB.106 was a two-shaft design with two axial flow compressors each driven by its own single stage turbine and reheat. It was of similar size to the Rolls-Royce Avon, allowing it to be used as a drop-in replacement, but it would have produced about twice the thrust at 21,750 lbf (96.7 kN). The two-shaft layout was relatively advanced for the era; the single-shaft de Havilland Gyron matched it in power terms, while the two-spool Bristol Olympus was much less powerful at the then-current state of development.

Apart from being expected to power British aircraft such as those competing for Operational Requirement F.155 it was selected to be the powerplant for the Avro Canada CF-105 Arrow. However funding was cut with the 1957 Defence White Paper which terminated most aircraft development then under way. The Arrow moved to an indigenous two-spool design similar to the RB.106, the Orenda Iroquois.

A scaled-up version of the RB106 intended for F.155 was the Rolls-Royce RB122.

The RB.106 project was cancelled in March 1957, at a reported total cost of £ 100,000.[1]

The competing Bristol two-spool engine to the same specification was to have been the Bristol Zeus.[2]

Specifications (RB.106)[edit]

General characteristics

  • Type: Two-shaft turbojet
  • Length:
  • Diameter:
  • Dry weight:

Components

  • Compressor: axial flow; LP followed by HP
  • Turbine: axial flow; HP single stage; LP single-stage

Performance

See also[edit]

Related lists

References[edit]

External links[edit]