Ruger Security Six

From Wikipedia, the free encyclopedia
  (Redirected from Ruger Speed Six)
Jump to: navigation, search
Ruger Security Six
Securitysix.jpg
Ruger Security Six in .357 Magnum
Type Revolver
Place of origin  United States
Production history
Manufacturer Sturm, Ruger
Produced 1972-1988
Variants
Specifications
Weight 33.5 oz (4 inch barrel)
Barrel length
  • 2.74 inch (70mm)
  • 4 inch (102 mm)
  • 6 inch (152 mm)

Cartridge
Action Double action
Feed system Six round cylinder
Sights Fixed and adjustable iron open

The Ruger Security Six and its variants, the Service Six and Speed Six are a product line of double action revolvers introduced in 1972 and manufactured by Sturm, Ruger & Company. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.[1]

Development and history[edit]

The introduction of the Security Six and its variants marked Sturm Ruger's first attempt to enter the double action revolver market. The corporation's earlier designs had been Colt Peacemaker style single action revolvers. Ruger used investment casting for most parts in an effort to hold down production costs.[2] As with all Ruger firearms, the Security Six revolvers were robustly designed with large, heavy-duty parts for durability and to allow for investment casting.[2][3] The "six series" line enjoyed sales success because of their basic features, solid construction, and competitive pricing.[2]

Various models were issued by US government agencies as diverse as the former Immigration and Naturalization Service, the Postal Service, Border Patrol, and numerous police agencies. The Security Six and its derivatives also became the standard issue service weapons of a large number of police departments, in addition many were exported overseas.[1] While Ruger's Security Six line has been out of production since 1988, a total of over 1.5 million revolvers were produced and they remain well-liked and respected, as well as highly sought after in the second-hand market.[1][3]

The Ruger GP-100 replaced the Security Six in the Ruger product line.

Features[edit]

The Security Six and its variants were more or less identical in basic design, with minor differences in sights (fixed or adjustable) and frame (round or square butt). Although medium-framed in size, the Security Six was somewhat stronger than competing guns like the Smith & Wesson Model 19 as the Ruger featured a thicker frame without a sideplate cutout, a stronger barrel shank support, larger, stronger internal parts, and an increased diameter cylinder with offset bolt locking notches. The new revolvers were initially manufactured in a blued carbon steel finish; in 1975 stainless steel versions of all models were added to the lineup.[1] Featuring six-round cylinders, the Security Six series represented one of the first modern revolver designs to feature a hammer powered by a coil spring utilizing a transfer-bar firing system, and was chambered for a variety of centerfire ammunition cartridges including .38 Special and .357 Magnum, as well as .38 S&W and 9x19mm Parabellum (9mm Luger).[1][3] All Security Six series revolvers came with original equipment manufacturer (OEM) supplied service-style wooden grips.[1] The wood grips were all manufactured for Ruger by W.F. Lett Manufacturing in New Hampshire, a now-defunct contractor. Most of these wood grips featured a diamond-shaped panel of pressed checkering, though smooth walnut grips with uncheckered panels were shipped with some commemorative models. Oversized walnut target/combat grips were also available as a factory option. During the 1980s, some of the Speed and Service Six models were also shipped with rubber Pachmayr grips containing the silver Ruger emblem.

Another feature of the Security Six was straightforward disassembly, which required no tools with the exception of a flathead screwdriver, coin, or cartridge case rim used to remove the grip screw.

Disassembly of the Security Six is as follows: 1: Make sure the firearm is unloaded. 2: Turn out grip screw. 3: Remove Grips. 4: Compress main spring. 5: Insert pin and decompress main spring. 6: Remove main spring. 7: Remove hammer pin. 8: Remove hammer. 9: Release and remove trigger assembly. 10: Release and remove Cylinder.

Security Six[edit]

Introduced in 1972, the Security Six was the original model of the new series.[4] The majority of these guns were manufactured with adjustable sights, though a few early models were sold with fixed sights. Security Sixes could be ordered with either service or "target" (combat) -style square butt grips. Nearly all Security Sixes were chambered for the .357 Magnum cartridge, which also permitted the use of the shorter .38 Special cartridge. Ruger also chambered the Security Six in .38 Special for some police orders by fitting different cylinders that could only accommodate the .38 Special cartridge. Barrel lengths available on the Security Six included 2.75, 4, and 6 inches.[1][3]

Service Six[edit]

After a few months of production, Ruger renamed the fixed-sight version of the Security Six the Service Six or alternatively, the "Police Service Six". This was largely a marketing decision and an attempt to capitalize on the lucrative law enforcement service revolver market. The Service Six was normally chambered in .357 Magnum, though Ruger also built versions in 38 Special and 9mm Luger (Parabellum) for some police orders.[2] The 9mm variant featured cylinder chambers bored to headspace the cartridge on the case mouth instead of the rim, using a patented spring 'moon' clip to permit extraction of the fired case. These alterations allowed the rimless 9mm cartridge to be used in a revolver design. Barrel length options for the Service Six included 2.75 and 4 inches.[2]

Speed Six[edit]

Rare Speed Six variant in 9mm Parabellum, which uses moon clips to chamber the rimless cartridges

Incorporating fixed sights and a round-butt frame, and available in .357 Magnum, .38 Special, .38 S&W (.380-200), and 9mm Luger, the Speed Six was intended for use by plainclothes detectives and others desiring a more concealable handgun. The standard barrel lengths available for these models were the same as those for the Service Six. The .38 S&W variant (in England known as the .380 British or .380-200) was equipped with a military-style lanyard ring, and was sold to law enforcement organizations in India.[1][3]

References[edit]

  1. ^ a b c d e f g h “Ruger Security Six, Police Service Six, Speed Six and GS32-N revolvers (USA)” World Guns Web site. Accessed December 14, 2008.
  2. ^ a b c d e Tong, David. “Ruger Security-Six .357 Magnum Revolver” Chuck Hawks Web site. Accessed December 14, 2008.
  3. ^ a b c d e Crumpston, Mike. "Revisiting Ruger's Revolvers" BNET Web site. Accessed December 14, 2008.
  4. ^ [1]