Jump to content

Shibanpo Yangtze River Bridge

Coordinates: 29°32′44″N 106°33′36″E / 29.545556°N 106.559889°E / 29.545556; 106.559889
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Naraht (talk | contribs) at 13:37, 9 September 2022 (top: cleanup and begin deleting image parameters no longer used by infobox bridges). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Shibanpo Yangtze River Bridge

石板坡长江大桥
Both Shibanpo Bridges looking towards Jiefangbei CBD area.
Coordinates29°32′44″N 106°33′36″E / 29.545556°N 106.559889°E / 29.545556; 106.559889
CarriesJiangnan Avenue
CrossesYangtze River
LocaleChongqing, China
Characteristics
DesignBox girder bridge
MaterialPrestressed concrete
Total length1,103 metres (3,619 ft)
Longest span1st bridge: 174 m (571 ft)[1]
2nd bridge: 330 m (1,080 ft)
History
Opened1st bridge: 1980
2nd bridge: 2006
Location
Map

The Shibanpo Yangtze River Bridge (simplified Chinese: 石板坡长江大桥; traditional Chinese: 石板坡長江大橋; pinyin: Shíbǎnpō chángjiāng dàqiáo) consists of a pair of prestressed concrete box girder bridges over the Yangtze River in Chongqing, China. The bridges carries 8 lanes of traffic on Jiangnan Avenue between the Nan'an District south of the Yangtze River and the Yuzhong District to the north.[2]

Original Bridge

Construction of the original bridge began in November 1977. The bridge cost RMB 64.68 million and was opened to traffic on the 1st of July 1980. The bridge was the first road bridge over the Yangtze River in Chongqing. The bridge carried two lanes of traffic in each direction.

Second Bridge

In 2003 construction began on the second four lane bridge to the west of the existing bridge to meet growing traffic demands. The new bridge was completed in 2006 at a cost of approximately US$40 million.[3] The main span of the new bridge was manufactured in the Wuchang District of Wuhan. It was sealed and was towed over 1,000 kilometres (620 mi) upstream to Chongqing. Placement of the piers due to the close proximity to the existing bridge necessitated a longer span; the bridge's main span of 330 metres (1,080 ft) makes it the largest box girder bridge in the world, displacing the previous record holder, the Stolma Bridge.[4] When the bridge was opened southbound traffic was moved onto the new bridge and all four lanes of the original bridge were used for northbound traffic.

Elevation of the second Shibanpo bridge

See also

References

  1. ^ Shibanpo Bridge (1980) at Structurae
  2. ^ (Chinese) 石板坡长江大桥复线桥今通车 华西都市报 2006-09-25
  3. ^ Shibanpo Bridge Breaks World Record for Longest Box Girder Bridge Span, American Segmental Bridge Institute, retrieved 9 August 2014
  4. ^ "Shibanpo Bridge Breaks World Record for Longest Box Girder Bridge Span" American Segmental Bridge Institute Accessed 2015-02-02